scholarly journals High-Temperature Performance of Polymer-Modified Asphalt Mixes: Preliminary Evaluation of the Usefulness of Standard Technical Index in Polymer-Modified Asphalt

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1404 ◽  
Author(s):  
Kezhen Yan ◽  
Lingyun You ◽  
Daocheng Wang
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Creep Recovery ◽  
Preliminary Evaluation ◽  
Zero Shear Viscosity ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Fluid Properties ◽  
Polymer Modified Asphalt

The objectives of this study are to evaluate the high-temperature performance of polymer-modified asphalt and asphalt mixtures, and to investigate if the standard technical indexes are useful in the performance evaluation of the polymer-modified asphalt. There are four typically used polymer-modified asphalt types employed in the study. The standard high-temperature rheological test, such as the temperature sweep test, was used to express the high-temperature performance of the polymer-modified asphalt. Also, considering the non-Newtonian fluid properties of the polymer-modified asphalt, the multiple stress creep recovery (MSCR) and zero-shear viscosity (ZSV) tests were employed for the characterizations. Besides, based on the mixture design of SMA-13, the high temperature of the polymer-modified asphalt mixture was evaluated via Marshall stability and rutting tests. The test results concluded that the ranking of the four kinds of polymer-modified asphalt was different in various laboratory tests. The TB-APAO has the best technical indexes in MSCR and ZSV tests, while the WTR-APAO performed best in the temperature sweep test. In addition, the correlation between the polymer-modified asphalt and the asphalt mixture was very poor. Thus, the present standard technical indexes for the profoundly polymer-modified asphalt mixtures are no longer suitable.

scholarly journals Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4910
Author(s):  
Ping Zhang ◽  
Lan Ouyang ◽  
Lvzhen Yang ◽  
Yi Yang ◽  
Guofeng Lu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Carbon Black ◽  
Influencing Factors ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil

As environmentally friendly materials, carbon black and bio-oil can be used as modifiers to effectively enhance the poor high-temperature and low-temperature performance of base asphalt and its mixture. Different carbon black and bio-oil contents and shear time were selected as the test influencing factors in this work. Based on the Box–Behnken design (BBD), carbon black/bio-oil composite modified asphalt was prepared to perform the softening point, penetration, multiple stress creep and recovery (MSCR), and bending beam rheometer (BBR) tests. The response surface method (RSM) was used to analyze the test results. In addition, the base asphalt mixtures and the optimal performance carbon black/bio-oil composite modified asphalt mixtures were formed for rutting and low-temperature splitting tests. The results show that incorporating carbon black can enhance the asphalt’s high-temperature performance by the test results of irrecoverable creep compliance (Jnr) and strain recovery rate (R). By contrast, the stiffness modulus (S) and creep rate (M) test results show that bio-oil can enhance the asphalt’s low-temperature performance. The quadratic function models between the performance indicators of carbon black/bio-oil composite modified asphalt and the test influencing factors were established based on the RSM. The optimal performance modified asphalt mixture’s carbon black and bio-oil content was 15.05% and 9.631%, and the shear time was 62.667 min. It was revealed that the high-temperature stability and low-temperature crack resistance of the carbon black/bio-oil composite modified asphalt mixture were better than that of the base asphalt mixture because of its higher dynamic stability (DS) and toughness. Therefore, carbon black/bio-oil composite modified asphalt mixture can be used as a new type of choice for road construction materials, which is in line with green development.

scholarly journals High-Temperature Performance of Asphalt Mixtures: Preliminary Analysis for the Standard Technical Index Based on Gray Relational Analysis Method

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Jian Xu ◽  
Yan Gong ◽  
Li-Biao Chen ◽  
Tao Ma ◽  
Jun-Cheng Zeng ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
High Temperature ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Asphalt Binders ◽  
Gray Relational Analysis ◽  
Low Grade ◽  
Modified Asphalt ◽  
Relational Analysis ◽  
Temperature Performance

Aiming to evaluate the high-temperature performance of asphalt binders and asphalt mixtures and to investigate the reliability of the standard technical indexes to evaluate the performance of the asphalt, six typically used asphalt types were employed in this study. The standard high-temperature rheological test, the multiple stress creep recovery (MSCR) test, and the zero-shear viscosity (ZSV) test were employed to characterize the high-temperature performance and non-Newtonian fluid properties of the asphalt. Meanwhile, the high-temperature performance of the asphalt mixture was evaluated through the rutting tests based on the mixture design of AC-13. In general, the modified asphalt performed better than the unmodified asphalt according to the high-temperature rheological properties tests. The ranking of the six kinds of asphalt was confirmed to be different in various laboratory tests. The test results of the asphalt binders showed that the Tafpack Super- (TPS-) modified asphalt performed best in the MSCR and ZSV tests, while the low-grade asphalt PEN20 had the best technical indexes in the dynamic shear rheometer (DSR) test. Besides, the relation between the asphalt and the asphalt mixture was analyzed by gray relational analysis (GRA) method. The present rutting indicator G ∗ / sin   δ  and  G ∗ / 1 − sin   δ ⋅   tan   δ − 1 for evaluating the asphalt mixtures’ high-temperature performance might no longer be suitable. The Cross/Williamson model was the most suitable for calculating and fitting the ZSV, which could be used as the key indicator of the high-temperature performance evaluation of the asphalt. This work lays a foundation for the further study of the high-temperature performance evaluation of asphalt binders.

Applied Research of the Modifying Agent of Rubber Plastic Composite (MaR) in Asphalt Mixture

2013 ◽  
Vol 477-478 ◽  
pp. 1175-1178
Author(s):  
Ling Zou ◽  
Jing Wei Ne ◽  
Weng Gang Zhang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Water Stability ◽  
Modified Asphalt ◽  
Modifying Agent ◽  
Temperature Performance ◽  
Splitting Test ◽  
Low Temperature Performance

70# and 90# matrix asphalt mixture with MaR were studied through dynamic modulus test, rutting test, freeze-thaw splitting test, bending test to study the applicability of the Modifying agent of rubber plastic compound (MaR) in matrix asphalt mixture.Test results were Compared with SBSI-C modified asphalt mixture.The results indicate that: high-temperature stability of MaR+70# asphalt mixture is as well as SBSI-C modified asphalt mixture,and is bettere than MaR+90# asphalt mixture; water stability of MaR+90# asphalt mixture is bettere than SBSI-C modified asphalt mixture and MaR+70# asphalt mixture; low temperature performance of MaR+90# asphalt mixture is bettere than MaR+70# asphalt mixture, but is worse than modified asphalt mixture SBSI-C ; MaR+70# asphalt mixture can be first used in area of resisting high temperature and rutting, MaR+90# asphalt mixture can be used if the water stability performance and low temperature performance are considered.

The Analyses and Calculation for Thermal Stresses of SBR Modified Asphalt Pavement

2011 ◽  
Vol 243-249 ◽  
pp. 4112-4118
Author(s):  
Min Jiang Zhang ◽  
Gang Chen ◽  
Li Xia Hou ◽  
Li Ping Zhang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Thermal Stresses ◽  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
The Finite Element Method ◽  
Temperature Stresses ◽  
Modified Asphalt ◽  
Temperature Performance

Based on the viscoelasticity theory and the data of creep test, Burgers model was established, which was used to study the viscoelastic property of SBR asphalt mixtures, and the viscoelastic constitutive relation was obtained. Using the finite element method, the temperature stresses field was calculated under the environmental conditions and the thermal stresses of SBR modified asphalt pavement was given at the last part of this paper. The study indicated that SBR modified asphalt mixtures have the advantage over common asphalt mixture in low-temperature performance.

Comparison of Test Methods for High-Temperature Performance of Asphalt Mixtures

2013 ◽  
Vol 361-363 ◽  
pp. 1629-1634 ◽  
Author(s):  
Guo Xiong Wu ◽  
Xiao Ke Zhang ◽  
Rui Lin Wang
Keyword(s):  
Elastic Modulus ◽  
High Temperature ◽  
Shear Test ◽  
Asphalt Mixture ◽  
Test Methods ◽  
Asphalt Mixtures ◽  
Penetration Test ◽  
Shear Elastic Modulus ◽  
Temperature Performance ◽  
Slant Shear

Through a comparative study of high-temperature asphalt mixture performance by three methods: the standard rutting test, uniaxial penetration test on cylindrical specimens, and slant shear test, this paper displays that the shear elastic modulus gained by both cylindrical uniaxial penetration test and slant shear test can reflect well the properties of shear deformation of asphalt mixture under high temperature. However, there are certain limitations in these test methods.

scholarly journals Improving the Low-Temperature Performance of RET Modified Asphalt Mixture with Different Modifiers

Coatings ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 1070
Author(s):  
Cheng Xu ◽  
Zhengqi Zhang ◽  
Feifei Liu
Keyword(s):  
Low Temperature ◽  
Asphalt Mixture ◽  
Bending Test ◽  
Creep Recovery ◽  
Dry Process ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Comparison Results ◽  
Beam Bending ◽  
Low Temperature Performance

To improve the low-temperature performance of RET (Reactive Elastomeric Terpolymer) modified asphalt mixture (RETM), polyurethane prepolymer (PUP) was used by wet process, ground waste rubber (GWR) and fibers were used by dry process. Tests of force ductility, bending beam rheometer (BBR), differential scanning calorimeter (DSC), viscosity and multiple stress creep recovery (MSCR) were conducted to study the effects of PUP on the performance of RET modified asphalt (RETA), and beam bending test was conducted to study the effects of GWR and fibers on the performance of RETM. Then, tests of beam bending, wheel tracking, Marshall immersion, freeze-thaw splitting, and economic analysis were further conducted to compare the performance and economy of RETM modified with optimum modifiers suggested. All modifiers improve the low-temperature performance of RETM. PUP content, the content and size of GWR and the content and type of fibers significantly affect the performance of RETA or RETM respectively. After analysis, 10% PUP, 2.1% 80 mesh GWR and 0.2% polyester (PE) fiber are considered as the optimum modifiers, respectively. Comparison results show that optimum modifiers variously improve the low-temperature performance, rutting resistance and moisture susceptibility of RETM, but they slightly reduced the economy of RETM. Comprehensive evaluation shows that 2.1% 80 mesh GWR and 10% PUP are better than 0.2% PE fiber.

scholarly journals High Temperature Performance of SBS and LM-S Modified Asphalt Mixtures by Triaxial Test

2021 ◽  
Vol 293 ◽  
pp. 02029
Author(s):  
Tang-Baoli ◽  
Ren-yongqiang ◽  
Chen-Xiangmei ◽  
Hou-Huifang ◽  
Liang-Jianping
Keyword(s):  
High Temperature ◽  
Creep Rate ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Deviatoric Stress ◽  
Repeated Loading ◽  
Flow Number ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Sbs Modified Asphalt

In order to study the high temperature performance of LM-S modified asphalt mixture and SBS modified asphalt mixture, repeated loading creep test was used to study the influence of temperature and deviatoric stress on the axial permanent deformation of the two kinds of asphalt mixture. At the same time, Permanent deformation, ε@5000, flow number FN and creep rate were select to evaluation of high temperature performance from different directions. The results show that the ε@5000 and creep rate are failed in the condition of high temperature and large deviatoric stress, so it hast widely practicable. The flow number FN is also limited by the conditions, which leads to the distortion of the flow number at lower temperature and smaller deviatoric stress so it is not easy to direct used as the evaluation index. Axial permanent deformation can reflect the permanent deformation in different cycles which is an excellent index to evaluate the high temperature performance of the two kinds of asphalt mixture, it is recommended to use axial permanent deformation to compare the LM-S modified asphalt mixture and SBS modified asphalt mixture The experimental results show that the axial permanent deformation of the LM-S modified asphalt mixture is always less than that of SBS modified asphalt mixture,it indicating that the high temperature rutting resistance of the LM-S modified asphalt mixture is better than that of SBS modified asphalt mixture.

Research on the Paving Performance of Montmorillonite/SBS Modified Asphalt Mixtures

2012 ◽  
Vol 204-208 ◽  
pp. 4143-4146
Author(s):  
Zhong Guo He ◽  
Xin De Tang ◽  
Wen Jun Yin ◽  
Yi Fan Sun ◽  
Zhong Bo Liu
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
High Temperature Stability ◽  
Moisture Susceptibility ◽  
Modified Asphalt ◽  
Sbs Modified Asphalt ◽  
Enhanced Stability

Montmorillonite/SBS composite modifed asphalts were prepared by mixing montmorillonite with SBS-modified asphalt, further the corresponding asphalt mixtures were obtained. The paving technical indexes of the mixture such as physical properties, moisture suscepyibility, and high temperature stability were tested, and compared with that of the corresponding SBS-modifed asphalt mixture and base asphalt mixture. The results demonstrate that the montmorillonite/SBS composite modifed asphalt mixture exhibites enhanced stability, improved flow value and moisture susceptibility, and increased high temperature stability.

Study on High Temperature Performance of Asphalt Mixture Based on Rutting Test

2015 ◽  
Vol 744-746 ◽  
pp. 1316-1319
Author(s):  
Yi Wang ◽  
Wei Li
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Aggregate Size ◽  
Temperature Stability ◽  
Maximum Aggregate Size ◽  
Test Results ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Nominal Size

In order to deeply reveal the high temperature stability of asphalt mixture, rutting test was implemented to evaluate the high temperature stability of asphalt mixture, and the evaluation index is dynamic stability. The effect of asphalt type, degree of compaction, gradation type and nominal maximum aggregate size on rutting test results was studied respectively. The results showed that: modified asphalt can improve the high temperature stability of asphalt mixture effectively; the anti-rutting performance of asphalt mixture reduces gradually with decrease of the degree of compaction; the anti-rutting performance of SAC-16 is greater than that of AC-16; and the anti-rutting performance of asphalt mixture is improved with increase of the nominal size of aggregate.

Sign in / Sign up

Export Citation Format

Share Document