scholarly journals Experimental Research on High Temperature Resistance of Modified Lightweight Concrete after Exposure to Elevated Temperatures

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Ke-cheng He ◽  
Rong-xin Guo ◽  
Qian-min Ma ◽  
Feng Yan ◽  
Zhi-wei Lin ◽  
...  
Keyword(s):  
Compressive Strength ◽  
High Temperature ◽  
Elevated Temperatures ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Modification Method ◽  
Superior Mechanical Properties ◽  
Axial Compressive Strength ◽  
Crushed Limestone

In order to improve the spalling resistance of lightweight aggregate concrete at high temperature, two types of modified materials were used to modify clay ceramsite lightweight aggregates by adopting the surface coating modification method. Spalling of the concrete specimens manufactured by using the modified aggregates was observed during a temperature elevation. Mass loss and residual axial compressive strength of the modified concrete specimens after exposure to elevated temperatures were also tested. Concrete specimens consisting of ordinary clay ceramsites and crushed limestone were manufactured as references for comparison. The results showed that the ordinary lightweight concrete specimens and the crushed limestone concrete specimens were completely spalled after exposure to target temperatures above 400°C and 1000°C, respectively, whereas the modified concrete specimens remained intact at 1200°C, at which approximately 25% to 38% of the residual compressive strength was retained. The results indicated that the modified lightweight concrete specimens have exhibited superior mechanical properties and resistance to thermal spalling after exposure to elevated temperatures.

scholarly journals Residual Mechanical Properties of Fiber-Reinforced Lightweight Aggregate Concrete after Exposure to Elevated Temperatures

2020 ◽  
Vol 10 (10) ◽  
pp. 3519 ◽  
Author(s):  
Chao-Wei Tang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Temperature ◽  
Flexural Strength ◽  
Elevated Temperatures ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Fiber Reinforced ◽  
Aggregate Concrete ◽  
Residual Mechanical Properties

In this study, the effects of individual and mixed fiber on the mechanical properties of lightweight aggregate concrete (LWC) after exposure to elevated temperatures were examined. Concrete specimens were divided into a control group (ordinary LWC) and an experimental group (fiber-reinforced LWC), and their compressive strength, elastic modulus, and flexural strength after heating to high temperatures of 400–800 °C were investigated. The four test parameters included concrete type, concrete strength, fiber type, and targeted temperature. The test results show that after exposure to 400–800 °C, the variation in mechanical properties of each group of LWC showed a trend of increasing first and then decreasing. After exposure to 400 °C, the residual mechanical properties of all specimens did not attenuate due to the drying effect of the high temperature and the more sufficient cement hydration reaction. However, after exposure to 800 °C, the residual mechanical properties significantly reduced. Overall, the mixed fiber-reinforced LWC showed a better ability to resist the loss of mechanical properties caused by high temperature. Compared with the loss of compressive strength, the flexural strength was relatively lost.

scholarly journals Effects of carbon nanotubes on expanded glass and silica aerogel based lightweight concrete

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Suman Kumar Adhikary ◽  
Žymantas Rudžionis ◽  
Simona Tučkutė ◽  
Deepankar Kumar Ashish
Keyword(s):  
Carbon Nanotubes ◽  
Compressive Strength ◽  
Silica Aerogel ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Cementitious Materials ◽  
Lightweight Aggregate Concrete ◽  
Multi Wall Carbon Nanotubes ◽  
Sem Image ◽  
Study Results

AbstractThis study is aimed to investigate the effect of carbon nanotubes on the properties of lightweight aggregate concrete containing expanded glass and silica aerogel. Combinations of expanded glass (55%) and hydrophobic silica aerogel particles (45%) were used as lightweight aggregates. Carbon nanotubes were sonicated in the water with polycarboxylate superplasticizer by ultrasonication energy for 3 min. Study results show that incorporating multi-wall carbon nanotubes significantly influences the compressive strength and microstructural performance of aerogel based lightweight concrete. The addition of carbon nanotubes gained almost 41% improvement in compressive strength. SEM image of lightweight concrete shows a homogeneous dispersal of carbon nanotubes within the concrete structure. SEM image of the composite shows presence of C–S–H gel surrounding the carbon nanotubes, which confirms the cites of nanotubes for the higher growth of C–S–H gel. Besides, agglomeration of carbon nanotubes and the presence of ettringites was observed in the transition zone between the silica aerogel and cementitious materials. Additionally, flowability, water absorption, microscopy, X-ray powder diffraction, and semi-adiabatic calorimetry results were analyzed in this study.

scholarly journals Efficiency factor and modulus of elasticity of lightweight concrete with expanded clay aggregate

2010 ◽  
Vol 3 (2) ◽  
pp. 195-204 ◽  
Author(s):  
W.G Moravia ◽  
A. G. Gumieri ◽  
W. L. Vasconcelos
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
Large Scale ◽  
Lightweight Concrete ◽  
Weight Ratio ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Empirical Methods ◽  
Normal Weight Concrete

Nowadays lightweight concrete is used on a large scale for structural purposes and to reduce the self-weight of structures. Specific grav- ity, compressive strength, strength/weight ratio and modulus of elasticity are important factors in the mechanical behavior of structures. This work studies these properties in lightweight aggregate concrete (LWAC) and normal-weight concrete (NWC), comparing them. Spe- cific gravity was evaluated in the fresh and hardened states. Four mixture proportions were adopted to evaluate compressive strength. For each proposed mixture proportion of the two concretes, cylindrical specimens were molded and tested at ages of 3, 7 and 28 days. The modulus of elasticity of the NWC and LWAC was analyzed by static, dynamic and empirical methods. The results show a larger strength/ weight ratio for LWAC, although this concrete presented lower compressive strength.

scholarly journals Novel Core-Shell Non-Sintered Lightweight Aggregate Concrete for Better Properties in Wallboard

2021 ◽  
Author(s):  
Chaoming PANG ◽  
Xinxin MENG ◽  
Chunpeng ZHANG ◽  
Jinlong PAN
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Insulation ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Dry Density ◽  
Core Shell ◽  
Aggregate Concrete ◽  
The Core

Abstract Shrinkage of foam concrete can easily cause cracking and thus makes it difficult for a manufacturer to maintain quality. The density of lightweight aggregate concrete is too high to meet specifications for lightweight and thermal insulation for wallboard. Two types of concrete with dry density in the range 1000–1200 kg/m3 for use in wallboard were designed and prepared using foam and lightweight aggregate. The properties of porous lightweight aggregate concrete with core-shell non-sintered lightweight aggregate were compared with sintered lightweight aggregate concrete along with several dimensions. The two aggregates were similar in particle size, density, and strength. The effects of each aggregate on the workability, compressive strength, dry shrinkage, and thermal conductivity of the lightweight concrete were analyzed and compared. Pore structures were determined by mercury intrusion porosimetry and X-ray computed tomography. Compressive strength ranged from 7.8 to 11.8 MPa, and thermal conductivity coefficients ranged from 0.193 to 0.219 W/m/K for both types of concrete. The results showed that the core-shell non-sintered lightweight aggregate bonded better with the paste matrix at the interface transition zone and had a better pore structure than the sintered lightweight aggregate concrete. Slump flow of the core-shell non-sintered lightweight aggregate concrete was about 20% greater than that of the sintered lightweight aggregate concrete, 28d compressive strength was about 10% greater, drying shrinkage was about 10% less, and thermal conductivity was less. Porous lightweight aggregate concrete using core-shell non-sintered lightweight aggregate performs well when used in wallboard because of its low density, high thermal insulation, and improved strength.

scholarly journals Utilization of Cementitious Materials with Cold-bonded Artificial Aggregate in Concrete

2019 ◽  
Vol 9 (1) ◽  
pp. 385-388
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Cementitious Materials ◽  
Lightweight Aggregate Concrete ◽  
Optimum Level ◽  
Aggregate Concrete ◽  
Glass Fibres ◽  
Granulated Blast Furnace Slag

This article investigates the slump and compressive strength of artificial lightweight aggregate concrete with Ground Granulated Blast Furnace Slag (GGBFS) and Silica Fume with glass fibres. The increase in usage of cement in the construction industry is a concern for ecological deterioration, in this view; artificial aggregates was manufactured with major amount of fly ash and replacement of cement with various industrial by-products in concrete. An optimum level of GGBFS from 10 to 50% and Silica Fume from 2 to 6% with addition of glass fibres was assessed based on compressive strength values. The compressive strength was conducted for 7 and 28Days of water curing on M30 grade lightweight concrete with constant water to cement ratio as 0.45 and 0.2% of Master Gelenium super plasticizer. The conclusions achieved from the compressive strength of concrete containing GGBFS and Silica Fume was increased as the curing time increases. As a result lightweight aggregate concrete with a cement content of 226 kg/m3 develops 37.3 N/mm2 compressive strength.

scholarly journals The effect of elevated temperature on the lightweight concrete containing waste PET aggregate

2018 ◽  
Vol 6 (3) ◽  
pp. 1-14
Author(s):  
Semiha Akçaözoğlu
Keyword(s):  
Compressive Strength ◽  
Elevated Temperature ◽  
Structural Integrity ◽  
Elevated Temperatures ◽  
Lightweight Concrete ◽  
Physical And Mechanical Properties ◽  
Lightweight Aggregate ◽  
Unit Weight ◽  
Residual Compressive Strength ◽  
Flexural Tensile Strength

In this study, the effect of waste PET as lightweight aggregate (WPLA) replacement with conventional aggregate on the some physical and mechanical properties and residual compressive strength of concrete was investigated. For this purpose, five different mixtures were prepared (the reference mixture and four WPLA mixtures including 30%, 40%, 50% and 60% waste PET aggregate by volume). The fresh and dry unit weights, compressive strengths, flexural-tensile strengths, water absorption and porosity ratios of the mixtures were measured. In addition the specimens exposed to elevated temperatures at 150, 300 and 450 °C and the residual compressive strengths were measured. Test results indicated that the unit weight, compressive strength and flexural-tensile strength of the specimens decreased as the amount of WPLA increased in concrete. After exposing to elevated temperature, WPLA mixtures retained their structural integrity and compressive strengths at 150 °C and 300 °C. However there was a significant decrease in the residual compressive strength values of WPLA mixtures at 450 °C.

Mechanical Properties of Lightweight Alum Sludge Aggregate Concrete

2015 ◽  
Vol 754-755 ◽  
pp. 413-416 ◽  
Author(s):  
Nur Quraatu’ Aini Mohd Rajin ◽  
Roszilah Hamid
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Content Increase ◽  
Split Tensile Strength ◽  
Aggregate Concrete ◽  
Alum Sludge ◽  
Better Than

Disposal of alum sludge (AS) in such an economical and environmental friendly way is a major challenge that water treatment plants around the globe had to deal with. AS cannot be dumped into landfills as it contains heavy metals which are harmful to the environment. In this study, alum sludge is utilised as partial replacements (0, 5 and 10%) of natural granite coarse aggregate (by mass) to form a lightweight concrete. The water/cement ratio is 0.65. The water absorption of the alum sludge is 22.06%. The slump, density, compressive strength and split tensile strength of the lightweight alum sludge aggregate concrete (LASAC) reduce as the AS aggregate content increase. The density of the 10% AS aggregate concrete is 2185.3 kg/m3. The compressive strength reduced from 25.6 MPa to 16.7 MPa and 14.2 MPa at 0, 5 and 10% replacement of AS aggregate respectively. The 2.18 MPa tensile strength of the control concrete reduced to 1.53 MPa at 10% replacement of AS aggregate. But as for the flexural strength, it increases from 5.42 MPa for the control up to 5.55 MPa and 5.63 MPa for 5 and 10% replacement of AS aggregate respectively. Results show that strength of alum sludge lightweight aggregate concrete is better than lightweight crumb tyre aggregate concrete and is at par with oil palm coconut shell aggregate concrete.

scholarly journals The Structural Characteristics of Lightweight Aggregate Concrete Beams

2019 ◽  
Vol 27 (2) ◽  
pp. 64-73
Author(s):  
Sajjad abdulameer Badar ◽  
Laith Shakir Rasheed ◽  
Shakir Ahmed Salih
Keyword(s):  
Compressive Strength ◽  
Ultimate Load ◽  
Lightweight Concrete ◽  
Concrete Beams ◽  
Lightweight Aggregate ◽  
Normal Weight ◽  
Lightweight Aggregate Concrete ◽  
Dry Density ◽  
Aggregate Concrete ◽  
Clay Bricks

This paper aims to investigate the structural behavior of reinforced lightweight concrete beams. Attapulgite aggregate and crushed clay brick aggregate were used as coarse lightweight aggregate to produce structural lightweight aggregate concrete with 25 Mpa and 43.6 Mpa cube compressive strength and 1805 Kg/m3 and 1977 Kg/m3 oven dry density respectively. The result of reinforced lightweight concrete beams compared with reinforced normal weight concrete beams, which have 50.5 Mpa cylinder compressive strength and 2317 Kg/m3 oven dry density. For each type of concrete two reinforced concrete beams with (1200 mm length × 180 mm height × 140 mm width), one of them tested under symmetrical two-points load STPL (a/d = 2.2) and another one tested under one-point load OPL (a/d=3.3) at 28 days. The experimental program shows that a structural lightweight aggregate concrete can be produced by using Attapulgite aggregate with 25 MPa cube compressive strength and 1805 Kg/m3 oven dry density and by using crushed clay brick aggregate with 43.6 MPa cube compressive strength and 1977 Kg/m3 oven dry density. The weight of Attapulgite aggregate concrete and crushed clay bricks aggregate concrete beam specimens were lower than normal weight aggregate concrete beams by about 20.56% and 13.65% respectively at 28 days.  As for the ultimate load capacities of beam specimens, the ultimate load of Attapulgite aggregate concrete beams tested under STPL were lower than that of crushed clay bricks aggregate concrete beams and normal weight aggregate concrete beams by about 4.85% and 5% respectively. While the ultimate load capacities of reinforced Attapulgite concrete beams tested under OPL were lower than that of reinforced crushed clay bricks aggregate concrete beams and reinforced normal weight aggregate concrete beams by about 10.3% and 10.5% respectively. Finally, Attapulgite aggregate concrete and crushed clay bricks aggregate concrete showed ductility and toughness less than that of Normal weight aggregate concrete.

scholarly journals The Effect of Elevated Temperature on the Lightweight Aggregate Concrete

2017 ◽  
Vol 2 (3) ◽  
pp. 193-196
Author(s):  
Rahel Khalid Ibrahim
Keyword(s):  
Elevated Temperature ◽  
Residual Strength ◽  
Elevated Temperatures ◽  
Lightweight Concrete ◽  
Concrete Structures ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Weight Losses ◽  
Before And After

The use of lightweight concrete has become widely spread in concrete structures in the last years. Fire can be considered as a destructive hazard that attack concrete structures. In this research the effect of elevated temperature on lightweight aggregate concretes is studied. For this purpose, 81 cube shaped specimens were prepared from three different lightweight aggregate concrete mixes. After moist curing periods for 3, 7 and28 days, the specimens were subjected to ambient and elevated temperatures of 450⁰C and 650⁰C for 2hrs.The weight of the specimens before and after exposure to elevated temperatures was determined and the residual strength results for the specimens were compared. The results showed that, the elevated temperature induces a decrease in strength and significant weight losses in lightweight aggregate concrete.

Compressive Behaviour of Polyarcylonitrile Fibre Reinforced Lightweight Aggregate Concrete Composite

2015 ◽  
Vol 1115 ◽  
pp. 188-191
Author(s):  
Kim Hung Mo ◽  
U. Johnson Alengaram ◽  
Mohd Zamin Jumaat
Keyword(s):  
Compressive Strength ◽  
Elevated Temperatures ◽  
Volume Fraction ◽  
Heat Exposure ◽  
Peak Stress ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Strength Deterioration ◽  
Compressive Behaviour ◽  
Relationship Of

In this paper, the effect of polyacrylonitrile (PAN) fibre addition at 0%, 0.1% and 0.2% volume fraction on the compressive behaviour such as compressive strength, residual strength upon heat exposure and compressive stress-strain relationship of lightweight oil palm shell concrete (OPSC) was investigated. OPSC with PAN fibres was found to exhibit reduced strength deterioration upon exposure to elevated temperatures of 100 °C, 200 °C and 400 °C. The strain at peak stress and the compressive ductility of OPSC were also increased with the addition of PAN fibres. Despite the reduced workability, no significant decrease in the compressive strength and saturated density of OPSC was observed in the presence of PAN fibres.

Sign in / Sign up

Export Citation Format

Share Document