scholarly journals Microoxygraph Device for Biosensoristic Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
A. Aloisi ◽  
E. Tarentini ◽  
A. Ferramosca ◽  
V. Zara ◽  
R. Rinaldi
Keyword(s):  
Response Time ◽  
Low Cost ◽  
Reference Electrode ◽  
Reaction Chamber ◽  
Counter Electrodes ◽  
Permeable Membrane ◽  
Lab On Chip ◽  
Lift Off ◽  
On Chip

Oxygen consumption rate (OCR) is a significant parameter helpful to determinein vitrorespiratory efficiency of living cells. Oxygen is an excellent oxidant and its electrocatalytic reduction on a noble metal allows accurately detecting it. By means of microfabrication technologies, handy, low-cost, and disposable chip can be attained, minimizing working volumes and improving sensitivity and response time. In this respect, here is presented a microoxygraph device (MOD), based on Clark’s electrode principle, displaying many advantageous features in comparison to other systems. This lab-on-chip platform is composed of a three-microelectrode detector equipped with a microgrooved electrochemical cell, sealed with a polymeric reaction chamber. Au working/counter electrodes and Ag/AgCl reference electrode were fabricated on a glass slide. A microchannel was realized by photoresist lift-off technique and a polydimethylsiloxane (PDMS) nanoporous film was integrated as oxygen permeable membrane (OPM) between the probe and the microreaction chamber. Electrochemical measurements showed good reproducibility and average response time, assessed by periodic injection and suction of a reducing agent. OCR measurements on 3T3 cells, subjected, in real time, to chemical stress on the respiratory chain, were able to show that this chip allows performing consistent metabolic analysis.

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Device for a Biosensor †

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1178 ◽  
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Microfluidic Device ◽  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
On Chip ◽  
Working Parameters ◽  
Auto Fluorescence

This contribution outlines the design and manufacturing of a microfluidic device implemented as a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval was carried on after bacteria heat-lysis by an on-chip micro-heater, whose function was characterized at different working parameters. Carbon resistive temperature sensors were tested, characterized and printed on the biochip sealing film to monitor the heating process. Off-chip and on-chip processed RNA were hybridized with capture probes on the reaction chamber surface and identification was achieved by detection of fluorescence tags. The application of the mentioned techniques and materials proved to allow the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the integration potential of fully thermoplastic devices in biosensor systems.

scholarly journals The Rise of the OM-LoC: Opto-Microfluidic Enabled Lab-on-Chip

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1467
Author(s):  
Harry Dawson ◽  
Jinane Elias ◽  
Pascal Etienne ◽  
Sylvie Calas-Etienne
Keyword(s):  
Low Cost ◽  
Optical Components ◽  
New Era ◽  
Lab On Chip ◽  
Highly Sensitive ◽  
Multiple Challenges ◽  
On Chip ◽  
Optical Circuits ◽  
Made In

The integration of optical circuits with microfluidic lab-on-chip (LoC) devices has resulted in a new era of potential in terms of both sample manipulation and detection at the micro-scale. On-chip optical components increase both control and analytical capabilities while reducing reliance on expensive laboratory photonic equipment that has limited microfluidic development. Notably, in-situ LoC devices for bio-chemical applications such as diagnostics and environmental monitoring could provide great value as low-cost, portable and highly sensitive systems. Multiple challenges remain however due to the complexity involved with combining photonics with micro-fabricated systems. Here, we aim to highlight the progress that optical on-chip systems have made in recent years regarding the main LoC applications: (1) sample manipulation and (2) detection. At the same time, we aim to address the constraints that limit industrial scaling of this technology. Through evaluating various fabrication methods, material choices and novel approaches of optic and fluidic integration, we aim to illustrate how optic-enabled LoC approaches are providing new possibilities for both sample analysis and manipulation.

Low cost optical particle detection for lab on chip systems based on DVD technology

2007 ◽  
Author(s):  
Andrew L. Clow ◽  
Rainer Künnemeyer ◽  
Paul Gaynor ◽  
John C. Sharpe
Keyword(s):  
Low Cost ◽  
Particle Detection ◽  
Lab On Chip ◽  
On Chip

Point-of-Care Systems for Rapid DNA Quantification in Oncology

2008 ◽  
Vol 94 (2) ◽  
pp. 216-225 ◽  
Author(s):  
Marco Bianchessi ◽  
Sarah Burgarella ◽  
Marco Cereda
Keyword(s):  
Point Of Care ◽  
Low Cost ◽  
Semiconductor Industry ◽  
Point Of Care Testing ◽  
Lab On Chip ◽  
Diagnostic Assays ◽  
Care Systems ◽  
Point Of Care Systems ◽  
The Common ◽  
On Chip

The development of new powerful applications and the improvement in fabrication techniques are promising an explosive growth in lab-on-chip use in the upcoming future. As the demand reaches significant levels, the semiconductor industry may enter in the field, bringing its capability to produce complex devices in large volumes, high quality and low cost. The lab-on-chip concept, when applied to medicine, leads to the point-of-care concept, where simple, compact and cheap instruments allow diagnostic assays to be performed quickly by untrained personnel directly at the patient's side. In this paper, some practical and economical considerations are made to support the advantages of point-of-care testing. A series of promising technologies developed by STMicroelectronics on lab-on-chips is also presented, mature enough to enter in the common medical practice. The possible use of these techniques for cancer research, diagnosis and treatment are illustrated together with the benefits offered by their implementation in point-of-care testing.

scholarly journals An AC electrothermal self-circulating system with a minimalist process to construct a biomimetic liver lobule model for drug testing

RSC Advances ◽  
2018 ◽  
Vol 8 (65) ◽  
pp. 36987-36998 ◽  
Author(s):  
Shengli Mi ◽  
Baihan Li ◽  
Xiaoman Yi ◽  
Yuanyuan Xu ◽  
Zhichang Du ◽  
...  
Keyword(s):  
Drug Toxicity ◽  
Drug Testing ◽  
Low Cost ◽  
Toxicity Testing ◽  
Liver Lobule ◽  
On Chip

Liver-on-chip, due to its precision and low cost for constructing in vitro models, has tremendous potential for drug toxicity testing and pathological studies.

A low-cost, label-free DNA detection method in lab-on-chip format based on electrohydrodynamic instabilities, with application to long-range PCR

Lab on a Chip ◽  
2012 ◽  
Vol 12 (22) ◽  
pp. 4738 ◽  
Author(s):  
Mohamed Lemine Youba Diakité ◽  
Jerôme Champ ◽  
Stephanie Descroix ◽  
Laurent Malaquin ◽  
François Amblard ◽  
...  
Keyword(s):  
Long Range ◽  
Detection Method ◽  
Dna Detection ◽  
Low Cost ◽  
Label Free ◽  
Lab On Chip ◽  
Free Dna ◽  
Chip Format ◽  
Long Range Pcr ◽  
On Chip

scholarly journals Design and Manufacturing of a Disposable, Cyclo-Olefin Copolymer, Microfluidic Biosensor

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 810
Author(s):  
Jorge Prada ◽  
Christina Cordes ◽  
Carsten Harms ◽  
Walter Lang
Keyword(s):  
Heating Temperature ◽  
Low Cost ◽  
Reaction Chamber ◽  
Microfluidic System ◽  
Heating Process ◽  
Design And Manufacturing ◽  
Microfluidic Biosensor ◽  
On Chip ◽  
Auto Fluorescence ◽  
Reaction Processes

This contribution outlines the design and manufacturing of a biosensor for retrieval and detection of bacteria RNA. The device is fully made of Cyclo-Olefin Copolymer (COC), which features low auto-fluorescence, biocompatibility and manufacturability by hot-embossing. The RNA retrieval is carried on after bacteria heat-lysis by an on-chip micro-heater. Two additional carbon resistive temperature sensors printed on the biochip sealing film monitor the heating process. RNA is hybridized with capture probes on the reaction chamber surface and identification is achieved by detection of fluorescence tags. The application of the mentioned techniques and materials facilitates the development of low-cost, disposable albeit multi-functional microfluidic system, performing heating, temperature sensing and chemical reaction processes in the same device. By proving its effectiveness, this device contributes a reference to show the potential of fully thermoplastic devices as biosensors.

scholarly journals An Intelligent Low-Power Low-Cost Mobile Lab-On-Chip Yeast Cell Culture Platform

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 70733-70745
Author(s):  
Yumin Liao ◽  
Ningmei Yu ◽  
Dian Tian ◽  
Chen Wang ◽  
Shuaijun Li ◽  
...  
Keyword(s):  
Cell Culture ◽  
Low Power ◽  
Yeast Cell ◽  
Low Cost ◽  
Lab On Chip ◽  
On Chip

scholarly journals Microfluidic Method of Pig Oocyte Quality Assessment in relation to Different Follicular Size Based on Lab-on-Chip Technology

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Bartosz Kempisty ◽  
Rafał Walczak ◽  
Paweł Antosik ◽  
Patrycja Sniadek ◽  
Marta Rybska ◽  
...  
Keyword(s):  
Optical Fibers ◽  
Spectral Characteristics ◽  
Oocyte Quality ◽  
Lab On Chip ◽  
Chip Technology ◽  
Porcine Oocyte ◽  
Follicular Size ◽  
On Chip ◽  
Pig Oocyte

Since microfollicular environment and the size of the follicle are important markers influencing oocyte quality, the aim of this study is to present the spectral characterization of oocytes isolated from follicles of various sizes using lab-on-chip (LOC) technology and to demonstrate how follicle size may affect oocyte quality. Porcine oocytes (each,n=100) recovered from follicles of different sizes, for example, from large (>5 mm), medium (3–5 mm), and small (<3 mm), were analyzed after precedingin vitromaturation (IVM). The LOC analysis was performed using a silicon-glass sandwich with two glass optical fibers positioned “face-to-face.” Oocytes collected from follicles of different size classes revealed specific and distinguishable spectral characteristics. The absorbance spectra (microspectrometric specificity) for oocytes isolated from large, medium, and small follicles differ significantly (P<0.05) and the absorbance wavelengths were between 626 and 628 nm, between 618 and 620 nm, and less than 618 nm, respectively. The present study offers a parametric and objective method of porcine oocyte assessment. However, up to now this study has been used to evidence spectral markers associated with follicular size in pigs, only. Further investigations with functional-biological assays and comparing LOC analyses with fertilization and pregnancy success and the outcome of healthy offspring must be performed.

Sign in / Sign up

Export Citation Format

Share Document