Low cost optical particle detection for lab on chip systems based on DVD technology

2007 ◽  
Author(s):  
Andrew L. Clow ◽  
Rainer Künnemeyer ◽  
Paul Gaynor ◽  
John C. Sharpe
Keyword(s):  
Low Cost ◽  
Particle Detection ◽  
Lab On Chip ◽  
On Chip

scholarly journals The Rise of the OM-LoC: Opto-Microfluidic Enabled Lab-on-Chip

Micromachines ◽  
2021 ◽  
Vol 12 (12) ◽  
pp. 1467
Author(s):  
Harry Dawson ◽  
Jinane Elias ◽  
Pascal Etienne ◽  
Sylvie Calas-Etienne
Keyword(s):  
Low Cost ◽  
Optical Components ◽  
New Era ◽  
Lab On Chip ◽  
Highly Sensitive ◽  
Multiple Challenges ◽  
On Chip ◽  
Optical Circuits ◽  
Made In

The integration of optical circuits with microfluidic lab-on-chip (LoC) devices has resulted in a new era of potential in terms of both sample manipulation and detection at the micro-scale. On-chip optical components increase both control and analytical capabilities while reducing reliance on expensive laboratory photonic equipment that has limited microfluidic development. Notably, in-situ LoC devices for bio-chemical applications such as diagnostics and environmental monitoring could provide great value as low-cost, portable and highly sensitive systems. Multiple challenges remain however due to the complexity involved with combining photonics with micro-fabricated systems. Here, we aim to highlight the progress that optical on-chip systems have made in recent years regarding the main LoC applications: (1) sample manipulation and (2) detection. At the same time, we aim to address the constraints that limit industrial scaling of this technology. Through evaluating various fabrication methods, material choices and novel approaches of optic and fluidic integration, we aim to illustrate how optic-enabled LoC approaches are providing new possibilities for both sample analysis and manipulation.

Point-of-Care Systems for Rapid DNA Quantification in Oncology

2008 ◽  
Vol 94 (2) ◽  
pp. 216-225 ◽  
Author(s):  
Marco Bianchessi ◽  
Sarah Burgarella ◽  
Marco Cereda
Keyword(s):  
Point Of Care ◽  
Low Cost ◽  
Semiconductor Industry ◽  
Point Of Care Testing ◽  
Lab On Chip ◽  
Diagnostic Assays ◽  
Care Systems ◽  
Point Of Care Systems ◽  
The Common ◽  
On Chip

The development of new powerful applications and the improvement in fabrication techniques are promising an explosive growth in lab-on-chip use in the upcoming future. As the demand reaches significant levels, the semiconductor industry may enter in the field, bringing its capability to produce complex devices in large volumes, high quality and low cost. The lab-on-chip concept, when applied to medicine, leads to the point-of-care concept, where simple, compact and cheap instruments allow diagnostic assays to be performed quickly by untrained personnel directly at the patient's side. In this paper, some practical and economical considerations are made to support the advantages of point-of-care testing. A series of promising technologies developed by STMicroelectronics on lab-on-chips is also presented, mature enough to enter in the common medical practice. The possible use of these techniques for cancer research, diagnosis and treatment are illustrated together with the benefits offered by their implementation in point-of-care testing.

A low-cost, label-free DNA detection method in lab-on-chip format based on electrohydrodynamic instabilities, with application to long-range PCR

Lab on a Chip ◽  
2012 ◽  
Vol 12 (22) ◽  
pp. 4738 ◽  
Author(s):  
Mohamed Lemine Youba Diakité ◽  
Jerôme Champ ◽  
Stephanie Descroix ◽  
Laurent Malaquin ◽  
François Amblard ◽  
...  
Keyword(s):  
Long Range ◽  
Detection Method ◽  
Dna Detection ◽  
Low Cost ◽  
Label Free ◽  
Lab On Chip ◽  
Free Dna ◽  
Chip Format ◽  
Long Range Pcr ◽  
On Chip

scholarly journals An Intelligent Low-Power Low-Cost Mobile Lab-On-Chip Yeast Cell Culture Platform

IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 70733-70745
Author(s):  
Yumin Liao ◽  
Ningmei Yu ◽  
Dian Tian ◽  
Chen Wang ◽  
Shuaijun Li ◽  
...  
Keyword(s):  
Cell Culture ◽  
Low Power ◽  
Yeast Cell ◽  
Low Cost ◽  
Lab On Chip ◽  
On Chip

Microfluidic Control Using Vapor Based Valves

2007 ◽  
Author(s):  
Wei Xu ◽  
Hong Xue ◽  
Mark Bachman ◽  
G. P. Li
Keyword(s):  
Temperature Gradient ◽  
Low Cost ◽  
Constant Flow ◽  
Lab On Chip ◽  
Air Pocket ◽  
Valve Function ◽  
Air Valve ◽  
On Chip ◽  
Silicon Based ◽  
At Will

Microflow valving and regulating are two important functions for microfluidic systems for applications such as Lab-on-Chip. Although silicon based counterparts have been studied extensively, few good technologies exist for polymer based microvalves and regulators. In this paper, we present designs and methods for microvalve and microflow regulators that are readily integrated into polymer microfluidic devices. The technologies utilize “air-pocket” structures built into the sidewalls of the microchannels. When liquid is filled in such a channel, air is trapped in “air pocket” structures due to the hydrophobicity of the polymer. By creating a small thermal gradient between the fluid in the channel and the air in the pockets, one can controllably evaporate fluid into the air pocket where it condenses. This displaces air out of the pocket into the flow channel, increasing the resistance to flow. The air valve retreats to its original pocket when the temperature gradient is removed, thus allowing one to increase or decrease fluid flow at will. If the temperature gradient is maintained long enough, the air will completely block the channel, forming an irreversible valving of the flow. Therefore, the same device can be used as either a valve or flow-regulating device. Microfluidic prototypes were built and tested using this technology. The results show successful constant flow delivery as well as valve function. This novel vapor based microflow valve and regulator has advantages of low cost, simple design, and both ease of fabrication and integration.

On-Site Monitoring of Steroid Hormones in Environmental Waters with a Low-Cost, Integrated Polymer Lab-on-Chip Device

2013 ◽  
Vol 448-453 ◽  
pp. 396-401
Author(s):  
Nuno Miguel Matos Pires ◽  
Tao Dong
Keyword(s):  
Steroid Hormones ◽  
Optical Sensors ◽  
Water Samples ◽  
Low Cost ◽  
Cost Effective ◽  
Environmental Water ◽  
Lab On Chip ◽  
Gold Thin Film ◽  
Site Monitoring ◽  
On Chip

Routine analysis of steroid hormones in environmental water samples demands for cost-effective tools that can detect multiple targets simultaneously. This study reports a high-throughput polymer platform integrated to polymer optical sensors for on-site monitoring of hormones in water. This opto-microfluidic device concept is fully compatible to low-cost fabrication methods. A competitive chemiluminescence immunoassay was performed onto gold thin film coated chambers, and a detection resolution of roughly 0.2 ng/mL was obtained using 17β-estradiol as the model target. Furthermore, the integrated polymer platform showed good recovery for the estradiol target when spiked in surface water samples.

SENSING AND ACTUATING BIO-MATERIALS ON STANDARD CMOS SUBSTRATES

2013 ◽  
Vol 22 (02) ◽  
pp. 1250081 ◽  
Author(s):  
FAISAL T. ABU-NIMEH ◽  
FATHI M. SALEM
Keyword(s):  
High Speed ◽  
High Efficiency ◽  
Low Cost ◽  
Magnetic Bead ◽  
Column Switching ◽  
Parallel Operation ◽  
Coil Array ◽  
Lab On Chip ◽  
On Chip ◽  
Array Sensing

We present a low-cost, low-power, high efficiency, and portable integrated implementations of a lab-on-chip for magnetic molecular level sensing manipulation, and diagnosis. The design features an all-integrated programmable magnetic coil array for sensing and actuating small magnetic bead objects. The coil array is selectively and dynamically controlled using the smallest permissible vertical coil inductors in this technology. Each cell, composed of the coil and its logical control circuitry, can detect small objects in the order of 1 μm diameter as well as emit eight programmable magnetic field levels for manipulation. All array sensing and driving components are shared to reduce the overall imprint. They are tuned towards the 900 s MHz ISM band and incorporating high-speed serial row/column switching up to 40 MHz for seamless pseudo-parallel operation.

scholarly journals Micro–Macro: Selective Integration of Microfeatures Inside Low-Cost Macromolds for PDMS Microfluidics Fabrication

Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 576 ◽  
Author(s):  
Edgar Jiménez-Díaz ◽  
Mariel Cano-Jorge ◽  
Diego Zamarrón-Hernández ◽  
Lucia Cabriales ◽  
Francisco Páez-Larios ◽  
...  
Keyword(s):  
Soft Lithography ◽  
Low Cost ◽  
Cost Effective ◽  
Microfluidic Chips ◽  
Single Chip ◽  
Lab On Chip ◽  
Molding Method ◽  
On Chip ◽  
Selective Integration ◽  
Important Progress

Microfluidics has become a very promising technology in recent years, due to its great potential to revolutionize life-science solutions. Generic microfabrication processes have been progressively made available to academic laboratories thanks to cost-effective soft-lithography techniques and enabled important progress in applications like lab-on-chip platforms using rapid- prototyping. However, micron-sized features are required in most designs, especially in biomimetic cell culture platforms, imposing elevated costs of production associated with lithography and limiting the use of such devices. In most cases, however, only a small portion of the structures require high-resolution and cost may be decreased. In this work, we present a replica-molding method separating the fabrication steps of low (macro) and high (micro) resolutions and then merging the two scales in a single chip. The method consists of fabricating the largest possible area in inexpensive macromolds using simple techniques such as plastics micromilling, laser microfabrication, or even by shrinking printed polystyrene sheets. The microfeatures were made on a separated mold or onto existing macromolds using photolithography or 2-photon lithography. By limiting the expensive area to the essential, the time and cost of fabrication can be reduced. Polydimethylsiloxane (PDMS) microfluidic chips were successfully fabricated from the constructed molds and tested to validate our micro–macro method.

scholarly journals A Magnetically Tunable Check Valve Applied to a Lab-on-Chip Nitrite Sensor

Sensors ◽  
2019 ◽  
Vol 19 (21) ◽  
pp. 4619
Author(s):  
Sean C. Morgan ◽  
Andre D. Hendricks ◽  
Mae L. Seto ◽  
Vincent J. Sieben
Keyword(s):  
Low Cost ◽  
Check Valve ◽  
Nutrient Sensing ◽  
Micro Milling ◽  
Lab On Chip ◽  
Optical Absorbance ◽  
Low Leakage ◽  
Integrated Optical ◽  
On Chip ◽  
Pulling Force

Presented here is the fabrication and characterization of a tunable microfluidic check valve for use in marine nutrient sensing. The ball-style valve makes use of a rare-earth permanent magnet, which exerts a pulling force to ensure it remains passively sealed until the prescribed cracking pressure is met. By adjusting the position of the magnet, the cracking pressure is shown to be customizable to meet design requirements. Further applicability is shown by integrating the valve into a poly(methyl methacrylate) (PMMA) lab-on-chip device with an integrated optical absorbance cell for nitrite detection in seawater. Micro-milling is used to manufacture both the valve and the micro-channel structures. The valve is characterized up to a flow rate of 14 mL min−1 and exhibits low leakage rates at high back pressures (<2 µL min−1 at ~350 kPa). It is low cost, requires no power, and is easily implemented on microfluidic platforms.

Sign in / Sign up

Export Citation Format

Share Document