scholarly journals Method for Improving Indoor Positioning Accuracy Using Extended Kalman Filter

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Seoung-Hyeon Lee ◽  
Il-Kwan Lim ◽  
Jae-Kwang Lee
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Low Cost ◽  
Indoor Positioning ◽  
Low Power Consumption ◽  
New Paradigm ◽  
Positioning Accuracy ◽  
Positioning Method ◽  
Beacon Signal ◽  
Dimensional Surface

Beacons using bluetooth low-energy (BLE) technology have emerged as a new paradigm of indoor positioning service (IPS) because of their advantages such as low power consumption, miniaturization, wide signal range, and low cost. However, the beacon performance is poor in terms of the indoor positioning accuracy because of noise, motion, and fading, all of which are characteristics of a bluetooth signal and depend on the installation location. Therefore, it is necessary to improve the accuracy of beacon-based indoor positioning technology by fusing it with existing indoor positioning technology, which uses Wi-Fi, ZigBee, and so forth. This study proposes a beacon-based indoor positioning method using an extended Kalman filter that recursively processes input data including noise. After defining the movement of a smartphone on a flat two-dimensional surface, it was assumed that the beacon signal is nonlinear. Then, the standard deviation and properties of the beacon signal were analyzed. According to the analysis results, an extended Kalman filter was designed and the accuracy of the smartphone’s indoor position was analyzed through simulations and tests. The proposed technique achieved good indoor positioning accuracy, with errors of 0.26 m and 0.28 m from the average x- and y-coordinates, respectively, based solely on the beacon signal.

scholarly journals An Efficient Indoor Positioning Method Based on Wi-Fi RSS Fingerprint and Classification Algorithm

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3418
Author(s):  
Balaji Ezhumalai ◽  
Moonbae Song ◽  
Kwangjin Park
Keyword(s):  
Low Cost ◽  
Clustering Algorithms ◽  
Access Point ◽  
Indoor Positioning ◽  
Reference Points ◽  
Indoor Environments ◽  
Positioning Accuracy ◽  
Signal Distribution ◽  
Positioning Method ◽  
Handling Method

Wi-Fi received signal strength (RSS) fingerprint-based indoor positioning has been widely used because of its low cost and universality advantages. However, the Wi-Fi RSS is greatly affected by multipath interference in indoor environments, which can cause significant errors in RSS observations. Many methods have been proposed to overcome this issue, including the average method and the error handling method, but these existing methods do not consider the ever-changing dynamics of RSS in indoor environments. In addition, traditional RSS-based clustering algorithms have been proposed in the literature, but they make clusters without considering the nonlinear similarity between reference points (RPs) and the signal distribution in ever-changing indoor environments. Therefore, to improve the positioning accuracy, this paper presents an improved RSS measurement technique (IRSSMT) to minimize the error of RSS observation by using the number of selected RSS and its median values, and the strongest access point (SAP) information-based clustering technique, which groups the RPs using their SAP similarity. The performance of this proposed method is tested by experiments conducted in two different experimental environments. The results reveal that our proposed method can greatly outperform the existing algorithms and improve the positioning accuracy by 89.06% and 67.48%, respectively.

scholarly journals A DCM Based Attitude Estimation Algorithm for Low-Cost MEMS IMUs

2015 ◽  
Vol 2015 ◽  
pp. 1-18 ◽  
Author(s):  
Heikki Hyyti ◽  
Arto Visala
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Low Cost ◽  
Direction Cosine ◽  
Estimation Algorithm ◽  
Calibration Method ◽  
Attitude Estimation ◽  
Mems Sensors ◽  
Acceleration Sensors ◽  
Adaptive Extended Kalman Filter

An attitude estimation algorithm is developed using an adaptive extended Kalman filter for low-cost microelectromechanical-system (MEMS) triaxial accelerometers and gyroscopes, that is, inertial measurement units (IMUs). Although these MEMS sensors are relatively cheap, they give more inaccurate measurements than conventional high-quality gyroscopes and accelerometers. To be able to use these low-cost MEMS sensors with precision in all situations, a novel attitude estimation algorithm is proposed for fusing triaxial gyroscope and accelerometer measurements. An extended Kalman filter is implemented to estimate attitude in direction cosine matrix (DCM) formation and to calibrate gyroscope biases online. We use a variable measurement covariance for acceleration measurements to ensure robustness against temporary nongravitational accelerations, which usually induce errors when estimating attitude with ordinary algorithms. The proposed algorithm enables accurate gyroscope online calibration by using only a triaxial gyroscope and accelerometer. It outperforms comparable state-of-the-art algorithms in those cases when there are either biases in the gyroscope measurements or large temporary nongravitational accelerations present. A low-cost, temperature-based calibration method is also discussed for initially calibrating gyroscope and acceleration sensors. An open source implementation of the algorithm is also available.

scholarly journals Indoor Positioning Method Based on Infrared Vision and UWB Fusion

2021 ◽  
Vol 2078 (1) ◽  
pp. 012070
Author(s):  
Qianrong Zhang ◽  
Yi Li
Keyword(s):  
Real Time ◽  
Indoor Localization ◽  
Low Cost ◽  
Ultra Wideband ◽  
Coverage Area ◽  
Positioning Accuracy ◽  
Mobile Vehicle ◽  
Positioning Method ◽  
Positioning Algorithm ◽  
Infrared Vision

Abstract Ultra-wideband (UWB) has broad application prospects in the field of indoor localization. In order to make up for the shortcomings of ultra-wideband that is easily affected by the environment, a positioning method based on the fusion of infrared vision and ultra-wideband is proposed. Infrared vision assists locating by identifying artificial landmarks attached to the ceiling. UWB uses an adaptive weight positioning algorithm to improve the positioning accuracy of the edge of the UWB positioning coverage area. Extended Kalman filter (EKF) is used to fuse the real-time location information of the two. Finally, the intelligent mobile vehicle-mounted platform is used to collect infrared images and UWB ranging information in the indoor environment to verify the fusion method. Experimental results show that the fusion positioning method is better than any positioning method, has the advantages of low cost, real-time performance, and robustness, and can achieve centimeter-level positioning accuracy.

scholarly journals Performance Enhancement of Pedestrian Navigation Systems Based on Low-Cost Foot-Mounted MEMS-IMU/Ultrasonic Sensor

Sensors ◽  
2019 ◽  
Vol 19 (2) ◽  
pp. 364 ◽  
Author(s):  
Ming Xia ◽  
Chundi Xiu ◽  
Dongkai Yang ◽  
Li Wang
Keyword(s):  
Kalman Filter ◽  
Extended Kalman Filter ◽  
Navigation System ◽  
Low Cost ◽  
Ultrasonic Sensor ◽  
Measurement Unit ◽  
Positioning Error ◽  
Process Noise ◽  
Pedestrian Navigation ◽  
Mems Imu

The pedestrian navigation system (PNS) based on inertial navigation system-extended Kalman filter-zero velocity update (INS-EKF-ZUPT or IEZ) is widely used in complex environments without external infrastructure owing to its characteristics of autonomy and continuity. IEZ, however, suffers from performance degradation caused by the dynamic change of process noise statistics and heading estimation errors. The main goal of this study is to effectively improve the accuracy and robustness of pedestrian localization based on the integration of the low-cost foot-mounted microelectromechanical system inertial measurement unit (MEMS-IMU) and ultrasonic sensor. The proposed solution has two main components: (1) the fuzzy inference system (FIS) is exploited to generate the adaptive factor for extended Kalman filter (EKF) after addressing the mismatch between statistical sample covariance of innovation and the theoretical one, and the fuzzy adaptive EKF (FAEKF) based on the MEMS-IMU/ultrasonic sensor for pedestrians was proposed. Accordingly, the adaptive factor is applied to correct process noise covariance that accurately reflects previous state estimations. (2) A straight motion heading update (SMHU) algorithm is developed to detect whether a straight walk happens and to revise errors in heading if the ultrasonic sensor detects the distance between the foot and reflection point of the wall. The experimental results show that horizontal positioning error is less than 2% of the total travelled distance (TTD) in different environments, which is the same order of positioning error compared with other works using high-end MEMS-IMU. It is concluded that the proposed approach can achieve high performance for PNS in terms of accuracy and robustness.

scholarly journals Mobile Robot Indoor Positioning System Based on K-ELM

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Haixia Wang ◽  
Junliang Li ◽  
Wei Cui ◽  
Xiao Lu ◽  
Zhiguo Zhang ◽  
...  
Keyword(s):  
Mobile Robot ◽  
Indoor Localization ◽  
Indoor Positioning ◽  
Positioning System ◽  
Positioning Accuracy ◽  
Positioning Method ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine ◽  
Positioning Algorithm ◽  
Indoor Positioning System

Mobile Robot Indoor Positioning System has wide application in the industry and home automation field. Unfortunately, existing mobile robot indoor positioning methods often suffer from poor positioning accuracy, system instability, and need for extra installation efforts. In this paper, we propose a novel positioning system which applies the centralized positioning method into the mobile robot, in which real-time positioning is achieved via interactions between ARM and computer. We apply the Kernel extreme learning machine (K-ELM) algorithm as our positioning algorithm after comparing four different algorithms in simulation experiments. Real-world indoor localization experiments are conducted, and the results demonstrate that the proposed system can not only improve positioning accuracy but also greatly reduce the installation efforts since our system solely relies on Wi-Fi devices.

scholarly journals Experimentally Validated Extended Kalman Filter for UAV State Estimation Using Low-Cost Sensors

2018 ◽  
Vol 51 (15) ◽  
pp. 43-48 ◽  
Author(s):  
S.P.H. Driessen ◽  
N.H.J. Janssen ◽  
L. Wang ◽  
J.L. Palmer ◽  
H. Nijmeijer
Keyword(s):  
Kalman Filter ◽  
State Estimation ◽  
Extended Kalman Filter ◽  
Low Cost

scholarly journals A Wi-Fi FTM-Based Indoor Positioning Method with LOS/NLOS Identification

2020 ◽  
Vol 10 (3) ◽  
pp. 956 ◽  
Author(s):  
Minghao Si ◽  
Yunjia Wang ◽  
Shenglei Xu ◽  
Meng Sun ◽  
Hongji Cao
Keyword(s):  
Numerical Experiments ◽  
New Technologies ◽  
Gaussian Model ◽  
Indoor Positioning ◽  
Least Square ◽  
Line Of Sight ◽  
Positioning Accuracy ◽  
Timing Measurement ◽  
Positioning Method ◽  
Non Line Of Sight

In recent years, many new technologies have been used in indoor positioning. In 2016, IEEE 802.11-2016 created a Wi-Fi fine timing measurement (FTM) protocol, making Wi-Fi ranging more robust and accurate, and providing meter-level positioning accuracy. However, the accuracy of positioning methods based on the new ranging technology is influenced by non-line-of-sight (NLOS) errors. To enhance the accuracy, a positioning method with LOS (line-of-sight)/NLOS identification is proposed in this paper. A Gaussian model has been established to identify NLOS signals. After identifying and discarding NLOS signals, the least square (LS) algorithm is used to calculate the location. The results of the numerical experiments indicate that our algorithm can identify and discard NLOS signals with a precision of 83.01% and a recall of 74.97%. Moreover, compared with the traditional algorithms, by all ranging results, the proposed method features more accurate and stable results for indoor positioning.

Sign in / Sign up

Export Citation Format

Share Document