scholarly journals Consistent Approximations of the Zeno Behaviour in Affine-Type Switched Dynamic Systems

2016 ◽  
Vol 2016 ◽  
pp. 1-9
Author(s):  
Vadim Azhmyakov

This paper proposes a new theoretic approach to a specific interaction of continuous and discrete dynamics in switched control systems known as a Zeno behaviour. We study executions of switched control systems with affine structure that admit infinitely many discrete transitions on a finite time interval. Although the real world processes do not present the corresponding behaviour, mathematical models of many engineering systems may be Zeno due to the used formal abstraction. We propose two useful approximative approaches to the Zeno dynamics, namely, an analytic technique and a variational description of this phenomenon. A generic trajectory associated with the Zeno dynamics can finally be characterized as a result of a specific projection or/and an optimization procedure applied to the original dynamic model. The obtained analytic and variational techniques provide an effective methodology for constructive approximations of the general Zeno-type behaviour. We also discuss shortly some possible applications of the proposed approximation schemes.

2018 ◽  
Vol 11 (3) ◽  
pp. 774-792
Author(s):  
Mutti-Ur Rehman ◽  
M. Fazeel Anwar

In this article we consider the matrix representations of finite symmetric groups Sn over the filed of complex numbers. These groups and their representations also appear as symmetries of certain linear control systems [5]. We compute the structure singular values (SSV) of the matrices arising from these representations. The obtained results of SSV are compared with well-known MATLAB routine mussv.


2014 ◽  
Vol 14 ◽  
pp. 86-98 ◽  
Author(s):  
Yi Zhang ◽  
Min Wang ◽  
Honglei Xu ◽  
Kok Lay Teo

Author(s):  
Juliano F. Gonçalves ◽  
Emílio C. N. Silva ◽  
Daniel M. De Leon ◽  
Eduardo A. Perondi

This paper addresses the design problem of piezoelectric actuators for multimodal active vibration control. The design process is carried out by a topology optimization procedure which aims at maximizing a control performance index written in terms of the controllability Gramian, which is a measure that describes the ability of the actuator to move the structure from an initial condition to a desired final state in a finite time interval. The main work contribution is that independent sets of design variables are associated with each modal controllability index, then the multi-objective problem can be split into independent single-objective problems. Thus, no weighting factors are required to be tuned to give each vibration mode a suitable relevance in the optimization problem. A material interpolation scheme based on the Solid Isotropic Material with Penalization (SIMP) and the Piezoelectric Material with Penalization (PEMAP) models is employed to consider the different sets of design variables and the sensitivity analysis is carried out analytically. Numerical examples are presented by considering the design and vibration control for a cantilever beam and a beam fixed at both ends to show the efficacy of the proposed formulation. The control performance of the optimized actuators is analyzed using a Linear-Quadratic Regulator (LQR) simulation.


2021 ◽  
Vol 358 (1) ◽  
pp. 251-267
Author(s):  
Hui Gao ◽  
Kaibo Shi ◽  
Hongbin Zhang

Author(s):  
Mahmood Karimi ◽  
Ramesh R. Rao

Recently, a nonlinear dynamic system has been presented to model the heart rate (HR) response during and after treadmill exercise. The parameters of the model can be estimated and individualized. Based on the nonlinear model, several control techniques for the regulation of HR during treadmill exercise have been proposed. But commercial treadmills may not have equipments to be computer-controlled. In this paper, an optimal manual method is presented to track a predefined HR trajectory. A piecewise constant speed profile is considered as the input to the system and computed by an optimization procedure offline. The objective function is constituted in term of heart rate deviation from its desired. The subject must change manually the speed of the treadmill according to the optimal protocol periodically. The time interval between two speed changes should be long enough so that the subject is able to change the speed. Also, the proposed method is such that, limited attention for control is needed and the controller is not always active.


2009 ◽  
Vol 42 (14) ◽  
pp. 61-65 ◽  
Author(s):  
Xu-Guang Li ◽  
Arben Cela ◽  
Silviu-Iulian Niculescu ◽  
Abdellatif Reama

Sign in / Sign up

Export Citation Format

Share Document