scholarly journals Investigations on Structural and Optical Properties of Hydrothermally Synthesized Zn2SnO4 Nanoparticles

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
L. Allwin Joseph ◽  
J. Emima Jeronsia ◽  
M. Mary Jaculine ◽  
S. Jerome Das
Keyword(s):  
Band Gap ◽  
Ph Value ◽  
Band Gap Energy ◽  
Sem Analysis ◽  
Stannic Chloride ◽  
Ternary Oxide ◽  
X Ray Diffraction ◽  
Growth Technique ◽  
Quantum Size ◽  
Room Temperature Photoluminescence Spectrum

Ternary oxide Zn2SnO4 has emerged as a promising material due to its tunable work function, band gap energy, and electric resistivity by simply varying the composition of the material. Zinc stannate nanoparticles were synthesized by green hydrothermal growth technique at 200°C for the reaction time of 24 h using stannic chloride pentahydrate (SnCl4·5H2O) and zinc chloride (ZnCl2) as precursors maintained at pH value of 8. X-ray diffraction analysis confirmed the phase purity and high crystalline nature of the synthesized sample. The estimated crystallite size was about 12.3 nm corresponding to the most prominent plane (311) using Scherrer equation. Morphology of the sample was characterized by SEM analysis, which confirmed the presence of small size nanoparticles. The optical property of synthesized sample was studied by using UV-visible and PL spectroscopy analysis. The derived optical band gap of 3.94 eV was found to be blue shifted as compared to bulk Zn2SnO4 (3.6 eV), which should be attributed to the quantum size effects. Room temperature photoluminescence spectrum showed emission bands at 397 nm and 468 nm.

The Optical Performance of Holmium Oxide Doped Tellurite Glass for Potential Optical Fiber

2021 ◽  
Vol 317 ◽  
pp. 95-99
Author(s):  
Muhammad Noorazlan Abd Azis ◽  
Halimah Mohamed Kamari ◽  
Suriani Abu Bakar ◽  
Azlina Yahya ◽  
Umar Saad Aliyu
Keyword(s):  
Refractive Index ◽  
Band Gap ◽  
Tellurite Glass ◽  
Optical Band Gap ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Gap Energy ◽  
Xrd Method ◽  
Nonlinear Pattern

Borotellurite glass had been widely applied in the field of optical communications and devices. In this work, holmium oxides doped borotellurite glass had been successfully fabricated via conventional melt-quenched technique. The structural properties of holmium doped tellurite glass were found using x-ray diffraction (XRD) method. The nonexistence of sharp peaks in XRD pattern shows that the inclusion of holmium tellurite glass leads to the formation long range of disorderness. The optical properties of the glass system such as refractive index and optical band gap energy are investigated using UV-Vis spectrophotometer. The value of refractive index is found in nonlinear trend along with holmium oxides concentration. It is found that the refractive index is more than 2 at 0.01, 0.03 and 0.04 of holmium concentrations. The optical band gap energy was found in similar trend with refractive index which is in nonlinear pattern.

FeAl2O4 Nanopowders; Structural Analysis and Band Gap Energy

2017 ◽  
Vol 36 (8) ◽  
pp. 789-793 ◽  
Author(s):  
Morteza Enhessari
Keyword(s):  
Structural Analysis ◽  
Band Gap ◽  
Sol Gel ◽  
Band Gap Energy ◽  
Mixed Metal Oxide ◽  
Nanoscale Materials ◽  
X Ray Diffraction ◽  
Organic Precursor ◽  
Gap Energy ◽  
Acid Gel

AbstractNanoscale FeAl2O4 was successfully synthesized via sol–gel method. The sol constituents containing iron and aluminum cations were formed homogenously in stearic acid gel (formation of organic precursor). The pure structural analysis and the size of the spinels were confirmed by X-ray diffraction (XRD). It was observed that the size of the nanoscale materials obtained at around 30–40nm. The micrographs of FeAl2O4 evidenced the homogenous and nanosize formation of spinel. The semiconducting behavior of this mixed metal oxide was observed at 3.14eV based on the band gap energy (Eg). The final nanoscale materials exhibited a superparamagnetic behavior with a saturation magnetization of 9.8 emu/g at applied field of 10 kOe.

scholarly journals One-Pot Synthesis of Ru-Doped ZnO Oxides for Photodegradation of 4-Chlorophenol

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Maria E. Manríquez ◽  
Luis Enrique Noreña ◽  
Jin An Wang ◽  
Lifang Chen ◽  
Jose Salmones ◽  
...  
Keyword(s):  
Band Gap ◽  
Mixed Oxides ◽  
Active Surface ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Electron Hole ◽  
One Pot ◽  
Notable Increase ◽  
Doped Zno ◽  
The One

The photocatalytic degradation of 4-chlorophenol in water using Ru-doped ZnO mixed oxides (0, 0.5, 1, and 3 wt% RuO2) synthesized by the one-pot homogeneous coprecipitation method is reported. ZnO with wurtzite structure was present in the mixed oxide as corroborated by Raman spectroscopy and X-ray diffraction analysis. All the samples showed nanorod morphological features. The presence of Ru6+/Ru4+ couples on ZnO modified the band gap of the mixed oxides and led to a shift of the band gap energy from 3.20 eV to 3.07 eV. Ru addition increased the surface area and significantly promoted the formation of active surface oxygen species such as hydroradicals evidenced by the fluorescence spectroscopy measurement. In the photodegradation of 4-chlorophenol solution under UV irradiation, a notable increase in photoactivity was obtained as the amount of RuO2 in the mixed oxides increased to 3 wt%. The charge transfer between Ru6+/Ru4+ couples and ZnO nanoparticles together with the formation of free radical oxidant species effectively inhibits electron-hole recombination rate, thus favoring the photodegradation of 4-chlorophenol.

scholarly journals Effect of Re and Tm-site on morphology structure and optical band gap of ReTmO3 (Re: La, Ce, Nd, Gd, Dy, Y and Tm: Fe, Cr) prepared by sol-gel method

2018 ◽  
Vol 64 (4) ◽  
pp. 381
Author(s):  
Muhammad Tufiq Jamil ◽  
Javed Ahmad ◽  
Syed Hamad Bukhari ◽  
Murtaza Saleem
Keyword(s):  
Band Gap ◽  
Sol Gel ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
Orthorhombic Crystal ◽  
X Ray ◽  
Average Grain Size ◽  
Auto Combustion ◽  
Uv Visible

Rare earth nano sized pollycrystalline orthoferrites and orthocromites ReT mO3 (Re = La, Nd, Gd, Dy, Y and T m = Fe, Cr) have been synthesized by sol-gel auto combustion citrate method. The samples have been characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), and UV-visible spectroscopy. The samples are single phase as confirmed by XRD analysis and correspond to the orthorhombic crystal symmetry with space group pbnm. Debye Scherer formula and Williamson Hall analysis have been used to calculate the average grain size which is consistent with that of determined from SEM analysis and varied between 25-75 nm. The elemental compositions of all samples have been checked by EDX analysis. Different crystallographic parameters are calculated with strong structural correlation among Re and Tm sites. The optical energy band gap has been calculated by using Tauc relation estimated to be in the range of 1.77 - 1.87 eV and 2.77 - 3.14 eV, for ReFeO3 and ReCrO3, respectively.

Hydrothermal Synthesis and Photocatalytic Activities of BiVO4 with Different Solvent

2013 ◽  
Vol 821-822 ◽  
pp. 80-84
Author(s):  
Bin Li ◽  
Xiao Gang Yang ◽  
Fang Lin Du
Keyword(s):  
Visible Light ◽  
Band Gap ◽  
Photocatalytic Oxidation ◽  
Hydrothermal Reaction ◽  
Raw Materials ◽  
Band Gap Energy ◽  
Photocatalytic Properties ◽  
X Ray Diffraction ◽  
Water As Solvent ◽  
Photocatalytic Activities

Bismuth-based oxides have attractive photocatalytic properties under visible light. Bismuth vanadate (BiVO4) particles as a visible light-responsive photocatalyst were prepared by a facile hydrothermal reaction method with the different solvent using Bi(NO3)3·5H2O and NH4VO3 as raw materials at 180°C for 18h. The as-prepared samples were characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV-vis absorption spectra (UV-vis). The photocatalytic activity of BiVO4 crystals was evaluated using the photocatalytic oxidation of methylene blue (MB) at room temperature under visible light irradiation. It was found that the morphology and the band gap adsorption edge of BiVO4 are different with the different solvent. The widest band gap energy of BiVO4 obtained with ethylene glycol as solvent is 2.405eV. In addition, the BiVO4 powders exhibit a certain photocatalytic properties to photodegrade MB and the maximum photocatalytic degradation rate is 34% using BiVO4 prepared with water as solvent for 2h.

Properties of CdS Thin Films Grown by Chemical Bath Deposition as a Function of Bath Temperature

2009 ◽  
Vol 609 ◽  
pp. 243-247 ◽  
Author(s):  
H. Moualkia ◽  
S. Hariech ◽  
M.S. Aida
Keyword(s):  
Thin Films ◽  
Optical Properties ◽  
Band Gap ◽  
Chemical Bath Deposition ◽  
Bath Temperature ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Glass Substrates ◽  
Cds Thin Films ◽  
Direct Band

The present work deals with the preparation and characterization of cadmium sulfur (CdS) thin films. These films are prepared by chemical bath deposition on the well cleaned glass substrates. The thickness of the samples was measured by using profilometer DEKTAK, structural and optical properties were studied by X-ray diffraction analysis, and UV-visible spectrophotometry. The optical properties of the films have been investigated as a function of temperature. The band gap energy and Urbach energy were also investigated as a function of temperature. From the transmittance data analysis the direct band gap ranges from 2.21 eV to 2.34 eV. A dependence of band gap on temperature has been observed and the possible raisons are discussed. Transmission spectra indicates a high transmission coefficient (75 %). Structural analysis revealed that the films showed cubic structure, and the crystallite size decreased at a higher deposition temperature.

Study on Band Gap Energy of F Doped TiO2 Nanotubes

2017 ◽  
Vol 889 ◽  
pp. 234-238
Author(s):  
Mohd Hasmizam Razali ◽  
Nur Arifah Ismail ◽  
Mahani Yusoff
Keyword(s):  
Band Gap ◽  
Diffuse Reflectance Spectroscopy ◽  
Small Diameter ◽  
Ultra Violet ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Gap Energy ◽  
Transmission Electron ◽  
Xrd Patterns

Pure and F doped TiO2 nanotubes was synthesized using simple hydrothermal method. The hydrothermal was conducted using teflon-liner autoclave and maintained at 150oC for 24 hours. The characterization of synthesised product was carried out using x-ray diffraction (XRD), transmission electron microscope (TEM), energy dispersive of x-ray spectroscopy (EDX) and ultra violet – visible light diffuse reflectance spectroscopy (UV-Vis DRS) for band gap measurements. XRD patterns indicated that anatase TiO2 phase was remained after F doping suggested that fluorine was highly dispersed into TiO2 by substituted with O in the TiO2 lattice to formed TiO2-xFx solid solution. Morphology investigation using TEM found out small diameter of nanotubes structure within 8 – 10 nm of pure and F doped TiO2 nanotubes. The band gap energy (Eg) of both nanotubes samples were almost similar proposing that F doping does not modify the band gap energy.

Characterization of MnS Thin Films Deposited by Chemical Bath Deposition

2019 ◽  
Vol 969 ◽  
pp. 433-438 ◽  
Author(s):  
Dattatraya K. Sonavane ◽  
S.K. Jare ◽  
M.A. Shaikh ◽  
R.V. Kathare ◽  
R.N. Bulakhe
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Band Gap ◽  
Chemical Bath Deposition ◽  
Band Gap Energy ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Glass Substrates ◽  
Double Beam

Glass substrates are used to deposit thin films utilizing basic and value effective chemical bath deposition (CBD) technique. The films were prepared from the mixture as solutions of manganous acetate tetrahydrate [C4H6MnO44H2O] as a manganese source, thiourea [(H2 N) 2 CS] as a sulfur source and triethanolamine (TEA) [(HOC2H4)3N] as a complexing agent.In the present paper the deposition was successfully done at 60 °C temperature. The absorption properties and band gap energy were determined employing double beam spectrophotometer. The optical band gap value calculated from absorption spectra of MnS thin film is found to be about 3.1eV.The MnS thin film was structurally characterized by X-ray Diffraction (XRD). The MnS thin film was morphologically characterized by Scanning Electron Microscopy (SEM) and elemental analysis was performed using EDS to confirm the formation of MnS.

Effect of Li Substitution in MgO Nanostructured on Band Gap Energy via Combustion Synthesis Method

2020 ◽  
Vol 301 ◽  
pp. 97-102
Author(s):  
Nor Fadilah Chayed ◽  
Nurhanna Badar ◽  
Kelimah Elong ◽  
Norlida Kamarulzaman
Keyword(s):  
Band Gap ◽  
Crystallite Size ◽  
Synthesis Method ◽  
Combustion Method ◽  
Band Gap Energy ◽  
X Ray Diffraction ◽  
Gap Energy ◽  
Polyhedral Shape ◽  
Band Gap Narrowing ◽  
Li Substitution

Preparation of MgO and Mg0.9Li0.2O materials using self-propagating combustion method are done to investigate the effect of substitution doping on the band gap energy. The synthesis condition has been optimized to obtain pure and single phase of MgO and Mg0.9Li0.2O materials and was confirmed by X-Ray Diffraction (XRD). The morphology obtained from field emission scanning electron microscopy (FESEM) is spherical and rounded polyhedral shape with agglomeration of crystallites for MgO and Mg0.9Li0.2O materials respectively. The crystallite size of MgO and Mg0.9 Li0.2O samples is between 50 nm to 120 nm and 200 nm to 1500 nm respectively. The band gap was determined by UV-Vis NIR spectrophotometer and it was found that the band gap obtained for MgO nanostructure is 6.10 eV which is lower than bulk MgO of 7.8 eV. The presence of Li in the MgO had caused changes in morphology, crystallite size and band gap narrowing to 3.83 eV.

Sign in / Sign up

Export Citation Format

Share Document