scholarly journals Core-Shell Nanocatalysts Obtained in Reverse Micelles: Structural and Kinetic Aspects

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Concha Tojo ◽  
David Buceta ◽  
M. Arturo López-Quintela
Keyword(s):  
Reverse Micelles ◽  
Bimetallic Nanoparticles ◽  
Reaction Rates ◽  
Computer Simulation Model ◽  
Experimental Conditions ◽  
One Pot ◽  
Initial Reactant ◽  
Reduction Potentials ◽  
Metal Precursors ◽  
Bimetallic Nanocatalysts

Ability to control the metal arrangement in bimetallic nanocatalysts is the key to improving their catalytic activity. To investigate how metal distribution in nanostructures can be modified, we developed a computer simulation model on the synthesis of bimetallic nanoparticles obtained in microemulsions by a one-pot method. The calculations allow predicting the metal arrangement in nanoparticle under different experimental conditions. We present results for two couples of metals, Au/Pt (Δε=0.26 V) and Au/Ag (Δε=0.19 V), but conclusions can be generalized to other bimetallic pairs with similar difference in standard reduction potentials. It was proved that both surface and interior compositions can be controlled at nanometer resolution easily by changing the initial reactant concentration inside micelles. Kinetic analysis demonstrates that the confinement of reactants inside micelles has a strong effect on the reaction rates of the metal precursors. As a result, the final nanocatalyst shows a more mixed core and a better defined shell as concentration is higher.

scholarly journals The impact of the confinement of reactants on the metal distribution in bimetallic nanoparticles synthesized in reverse micelles

2014 ◽  
Vol 5 ◽  
pp. 1966-1979 ◽  
Author(s):  
Concha Tojo ◽  
Elena González ◽  
Nuria Vila-Romeu
Keyword(s):  
Exchange Rate ◽  
Reverse Micelles ◽  
Reaction Rate ◽  
Reduction Potential ◽  
Bimetallic Nanoparticles ◽  
Chemical Reduction ◽  
Reduction Rate ◽  
Reaction Rates ◽  
Confined Media ◽  
The Impact

A kinetic study on the formation of bimetallic nanoparticles in microemulsions was carried out by computer simulation. A comprehensive analysis of the resulting nanostructures was performed regarding the influence of intermicellar exchange on reactivity. The objects of this study were metals having a difference in standard reduction potential of about 0.2–0.3 V. Relatively flexible microemulsions were employed and the concentration of the reactants was kept constant, while the reaction rate of each metal was monitored as a function of time using different reactant proportions. It was demonstrated that the reaction rates depend not only on the chemical reduction rate, but also on the intermicellar exchange rate. Furthermore, intermicellar exchange causes the accumulation of slower precursors inside the micelles, which favors chemical reduction. As a consequence, slower reduction rates strongly correlate with the number of reactants in this confined media. On the contrary, faster reduction rates are limited by the intermicellar exchange rate and not the number of reactants inside the micelles. As a result, different precursor proportions lead to different sequences of metal reduction, and thus the arrangement of the two metals in the nanostructure can be manipulated.

SEM analysis of the change in the reaction rates with deposit structures in the copper-iron cementation system

1978 ◽  
Vol 36 (1) ◽  
pp. 456-457
Author(s):  
V. Annamalai ◽  
L.E. Murr
Keyword(s):  
Structural Characteristics ◽  
Secondary Electron Emission ◽  
Copper Deposit ◽  
Reaction Rates ◽  
Sem Analysis ◽  
Experimental Conditions ◽  
Major Drawback ◽  
Emission Mode ◽  
Scrap Iron ◽  
Image Position

Economical recovery of copper metal from leach liquors has been carried out by the simple process of cementing copper onto a suitable substrate metal, such as scrap-iron, since the 16th century. The process has, however, a major drawback of consuming more iron than stoichiometrically needed by the reaction.Therefore, many research groups started looking into the process more closely. Though it is accepted that the structural characteristics of the resultant copper deposit cause changes in reaction rates for various experimental conditions, not many systems have been systematically investigated. This paper examines the deposit structures and the kinetic data, and explains the correlations between them.A simple cementation cell along with rotating discs of pure iron (99.9%) were employed in this study to obtain the kinetic results The resultant copper deposits were studied in a Hitachi Perkin-Elmer HHS-2R scanning electron microscope operated at 25kV in the secondary electron emission mode.

A Reinvestigation of the Deceptively Simple Reaction of Toluene with ●OH, and the Fate of the Benzyl Radical. I. a Combined Thermodynamic and Kinetic Study on the Competition Between ●OH Addition and Hydrogen Abstraction Reactions.

2019 ◽  
Author(s):  
Zoi Salta ◽  
Agnie M. Kosmas ◽  
Marc E. Segovia ◽  
Martina Kieninger ◽  
Oscar Ventura ◽  
...  
Keyword(s):  
Density Functional ◽  
Room Temperature ◽  
Hydrogen Abstraction ◽  
Reaction Rates ◽  
Composite Model ◽  
Alternative Mechanism ◽  
Radical Intermediate ◽  
Experimental Conditions ◽  
Methyl Group ◽  
Benzyl Radical

This work reports density functional and composite model chemistry calculations performed on the reactions of toluene with the hydroxyl radical. Both experimentally observed H-abstraction from the methyl group and possible additions to the phenyl ring were investigated. Reaction enthalpies and heights of the barriers suggest that H-abstraction is more favorable than ●OH addition to the ring. The calculated reaction rates at room temperature and the radical-intermediate product fractions support this view. This is somehow contradictory with the fact that, under most experimental conditions, cresols are observed in a larger concentration than benzaldehyde. Since the accepted mechanism for benzaldehyde formation involves H-abstraction, a contradiction arises that begs for an explanation. In this first part of our work we give the evidences that support the preference of hydrogen abstraction over ●OH addition and suggest an alternative mechanism which shows that cresols can actually arise also from the former reaction and not only from the latter.

A Reinvestigation of the Deceptively Simple Reaction of Toluene with ●OH, and the Fate of the Benzyl Radical. I. a Combined Thermodynamic and Kinetic Study on the Competition Between ●OH Addition and Hydrogen Abstraction Reactions.

2019 ◽  
Author(s):  
Zoi Salta ◽  
Agnie M. Kosmas ◽  
Marc E. Segovia ◽  
Martina Kieninger ◽  
Oscar Ventura ◽  
...  
Keyword(s):  
Density Functional ◽  
Room Temperature ◽  
Hydrogen Abstraction ◽  
Reaction Rates ◽  
Composite Model ◽  
Alternative Mechanism ◽  
Radical Intermediate ◽  
Experimental Conditions ◽  
Methyl Group ◽  
Benzyl Radical

This work reports density functional and composite model chemistry calculations performed on the reactions of toluene with the hydroxyl radical. Both experimentally observed H-abstraction from the methyl group and possible additions to the phenyl ring were investigated. Reaction enthalpies and heights of the barriers suggest that H-abstraction is more favorable than ●OH addition to the ring. The calculated reaction rates at room temperature and the radical-intermediate product fractions support this view. This is somehow contradictory with the fact that, under most experimental conditions, cresols are observed in a larger concentration than benzaldehyde. Since the accepted mechanism for benzaldehyde formation involves H-abstraction, a contradiction arises that begs for an explanation. In this first part of our work we give the evidences that support the preference of hydrogen abstraction over ●OH addition and suggest an alternative mechanism which shows that cresols can actually arise also from the former reaction and not only from the latter.

scholarly journals Glucuronides Hydrolysis by Intestinal Microbial β-Glucuronidases (GUS) Is Affected by Sampling, Enzyme Preparation, Buffer pH, and Species

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1043
Author(s):  
Christabel Ebuzoeme ◽  
Imoh Etim ◽  
Autumn Ikimi ◽  
Jamie Song ◽  
Ting Du ◽  
...  
Keyword(s):  
Enzyme Preparation ◽  
Reaction System ◽  
Reaction Rates ◽  
Experimental Conditions ◽  
Model Animal ◽  
Fresh Feces ◽  
Time Buffer ◽  
Exogenous Compounds ◽  
Activity Loss ◽  
The Impact

Glucuronides hydrolysis by intestinal microbial β-Glucuronidases (GUS) is an important procedure for many endogenous and exogenous compounds. The purpose of this study is to determine the impact of experimental conditions on glucuronide hydrolysis by intestinal microbial GUS. Standard probe 4-Nitrophenyl β-D-glucopyranoside (pNPG) and a natural glucuronide wogonoside were used as the model compounds. Feces collection time, buffer conditions, interindividual, and species variations were evaluated by incubating the substrates with enzymes. The relative reaction activity of pNPG, reaction rates, and reaction kinetics for wogonoside were calculated. Fresh feces showed the highest hydrolysis activities. Sonication increased total protein yield during enzyme preparation. The pH of the reaction system increased the activity in 0.69–1.32-fold, 2.9–12.9-fold, and 0.28–1.56-fold for mouse, rat, and human at three different concentrations of wogonoside, respectively. The Vmax for wogonoside hydrolysis was 2.37 ± 0.06, 4.48 ± 0.11, and 5.17 ± 0.16 μmol/min/mg and Km was 6.51 ± 0.71, 3.04 ± 0.34, and 0.34 ± 0.047 μM for mouse, rat, and human, respectively. The inter-individual difference was significant (4–6-fold) using inbred rats as the model animal. Fresh feces should be used to avoid activity loss and sonication should be utilized in enzyme preparation to increase hydrolysis activity. The buffer pH should be appropriate according to the species. Inter-individual and species variations were significant.

scholarly journals Novel Preparation of Cu and Fe Zirconia Supported Catalysts for Selective Catalytic Reduction of NO with NH3

Catalysts ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 55
Author(s):  
Katarzyna Świrk ◽  
Ye Wang ◽  
Changwei Hu ◽  
Li Li ◽  
Patrick Da Costa ◽  
...  
Keyword(s):  
Selective Catalytic Reduction ◽  
Catalytic Reduction ◽  
Supported Catalysts ◽  
Catalytic Performance ◽  
Experimental Conditions ◽  
One Pot ◽  
Nh3 Scr ◽  
Scr Of No ◽  
Temperature Programmed ◽  
Stationary Sources

Copper and iron promoted ZrO2 catalysts were prepared by one-pot synthesis using urea. The studied catalysts were characterized by XRD, N2 physisorption, XPS, temperature-programmed desorption of NH3 (NH3-TPD), and tested by the selective catalytic reduction by ammonia (NH3-SCR) of NO in the absence and presence of water vapor, under the experimental conditions representative of exhaust gases from stationary sources. The influence of SO2 on catalytic performance was also investigated. Among the studied catalysts, the Fe-Zr sample showed the most promising results in NH3-SCR, being active and highly selective to N2. The addition of SO2 markedly improved NO and NH3 conversions during NH3-SCR in the presence of H2O. The improvement in acidic surface properties is believed to be the cause.

scholarly journals Computational Design of Sensitized Combustion Chemistry Experiments

2021 ◽  
Vol 7 ◽  
Author(s):  
Cody Ising ◽  
Pedro Rodriguez ◽  
Daniel Lopez ◽  
Jeffrey Santner
Keyword(s):  
Shock Tube ◽  
Initial Conditions ◽  
Computational Design ◽  
Reaction Rates ◽  
Oxidation Reactions ◽  
Combustion Chemistry ◽  
Experimental Conditions ◽  
As Species ◽  
User Friendly

In combustion chemistry experiments, reaction rates are often extracted from complex experiments using detailed models. To aid in this process, experiments are performed such that measurable quantities, such as species concentrations, flame speed, and ignition delay, are sensitive to reaction rates of interest. In this work, a systematic method for determining such sensitized experimental conditions is demonstrated. An open-source python script was created using the Cantera module to simulate thousands of 0D and hundreds of 1D combustion chemistry experiments in parallel across a broad, user-defined range of mixture conditions. The results of the simulation are post-processed to normalize and compare sensitivity values among reactions and across initial conditions for time-varying and steady-state simulations, in order to determine the “most useful” experimental conditions. This software can be utilized by researchers as a fast, user-friendly screening tool to determine the thermodynamic and mixture parameters for an experimental campaign. We demonstrate this software through two case studies comparing results of the 0D script against a shock tube experiment and results of the 1D script against a spherical flame experiment. In the shock tube case study we present mixture conditions compared to those used in the literature to study H + O2 (+M)→HO2(+M). In the flame case study, we present mixture conditions compared to those in the literature to study formyl radical (HCO) decomposition and oxidation reactions. The systematically determined experimental conditions identified in the present work are similar to the conditions chosen in the literature.

scholarly journals Reactivity of cyclohex-1-enylcarboxylic and 2-methylcyclohex-1-enylcarboxylic acids with diazodiphenylmethane in aprotic solvents

2000 ◽  
Vol 65 (12) ◽  
pp. 839-846
Author(s):  
Jasmina Nikolic ◽  
Gordana Uscumlic ◽  
Vera Krstic
Keyword(s):  
Hydrogen Bond ◽  
Rate Constants ◽  
Kinetic Data ◽  
Linear Regression Analysis ◽  
Spectroscopic Method ◽  
Reaction Rates ◽  
Aprotic Solvents ◽  
Experimental Conditions ◽  
Hydrogen Bond Acceptor ◽  
Protic Solvents

Rate constants for the reaction of diazodiphenylmethane with cyclohex-1-enylcarboxylic acid and 2-methylcyclohex-1-enylcarboxylic acid were determined in nine aprotic solvents, as well as in seven protic solvents, at 30?C using the appropriate UV-spectroscopic method. In protic solvents the unsubsituted acid displayed higher reaction rates than the methyl-substituted one. The results in aprotic solvents showed quite the opposite, and the reaction rates were considerably lower. In order to explain the obtained results through solvent effects, reaction rate constants (k) of the examined acids were correlated using the total solvatochromic equation of the form: log k=logk0+s?*+a?+b?, where ?* is the measure of the solvent polarity, a represents the scale of the solvent hydrogen bond donor acidities (HBD) and b represents the scale of the solvent hydrogen bond acceptor basicities (HBA). The correlation of the kinetic data were carried out by means of multiple linear regression analysis and the opposite effects of aprotic solvents, as well as the difference in the influence of protic and aprotic solvents on the reaction of the two examined acids with DDM were discussed. The results presented in this paper for cyclohex-1-enylcarboxylic and 2-methylcyclohex-1-enylcarboxylic acids were compared with the kinetic data for benzoic acid obtained in the same chemical reaction, under the same experimental conditions.

scholarly journals Facile One-Pot Biogenic Synthesis of Cu-Co-Ni Trimetallic Nanoparticles for Enhanced Photocatalytic Dye Degradation

Catalysts ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1138
Author(s):  
Abdulmohsen Ali Alshehri ◽  
Maqsood Ahmad Malik
Keyword(s):  
Electron Microscopy ◽  
Dye Degradation ◽  
Critical Role ◽  
Weight Changes ◽  
Origanum Vulgare ◽  
One Pot ◽  
Ftir Microscopy ◽  
Degradation Kinetic ◽  
X Ray ◽  
Metal Precursors

Biomolecules from plant extracts have gained significant interest in the synthesis of nanoparticles owing to their sustainable properties, cost efficiency, and environmental wellbeing. An eco-friendly and facile method has been developed to prepare Cu-Co-Ni trimetallic nanoparticles with simultaneous bio-reduction of Cu-Co-Ni metal precursors by aqueous extract of oregano (Origanum vulgare) leaves. Dramatic changes in physicochemical properties of trimetallic nanoparticles occur due to synergistic interactions between individual metal precursors, which in turn outclass the properties of corresponding monometallic nanoparticles in various aspects. The as biosynthesized Cu-Co-Ni trimetallic nanoparticles were initially analyzed using ultraviolet (UV)–visible spectroscopy. The morphology, structure, shape, and size of biosynthesized trimetallic nanoparticles were confirmed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction (XRD) spectroscopy. The elemental analysis was carried out by energy-dispersive X-ray (EDX) spectroscopy. Fourier transform infrared (FTIR) microscopy was carried out to explain the critical role of the biomolecules in the Origanum vulgare leaf extract as capping and stabilizing agents in the nanoparticle formation. Additionally, simultaneous thermogravimetric analysis (TGA) and differential thermogravimetry (DTG) analysis was also performed to estimate the mass evaluation and rate of the material weight changes. The photocatalytic activity of as biosynthesized trimetallic nanoparticles was investigated towards methylene blue (MB) dye degradation and was found to be an efficient photocatalyst for dye degradation. Kinetic experiments have shown that photocatalytic degradation of MB dye followed pseudo-first-order kinetics. The mechanism of the photodegradation process of biogenic Cu-Co-Ni trimetallic nanoparticles was also addressed.

Sign in / Sign up

Export Citation Format

Share Document