scholarly journals Simulation of Gas Transport in Tight/Shale Gas Reservoirs by a Multicomponent Model Based on PEBI Grid

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Longjun Zhang ◽  
Daolun Li ◽  
Lei Wang ◽  
Detang Lu
Keyword(s):  
Shale Gas ◽  
Slip Flow ◽  
Gas Production ◽  
Darcy Flow ◽  
Molecular Flow ◽  
Flow Transition ◽  
Free Molecular Flow ◽  
Transition Flow ◽  
Gas Reservoirs ◽  
Fracture Length

The ultra-low permeability and nanosize pores of tight/shale gas reservoir would lead to non-Darcy flow including slip flow, transition flow, and free molecular flow, which cannot be described by traditional Darcy’s law. The organic content often adsorbs some gas content, while the adsorbed amount for different gas species is different. Based on these facts, we develop a new compositional model based on unstructured PEBI (perpendicular bisection) grid, which is able to characterize non-Darcy flow including slip flow, transition flow, and free molecular flow and the multicomponent adsorption in tight/shale gas reservoirs. With the proposed model, we study the effect of non-Darcy flow, length of the hydraulic fracture, and initial gas composition on gas production. The results show both non-Darcy flow and fracture length have significant influence on gas production. Ignoring non-Darcy flow would underestimate 67% cumulative gas production in lower permeable gas reservoirs. Gas production increases with fracture length. In lower permeable reservoirs, gas production increases almost linearly with the hydraulic fracture length. However, in higher permeable reservoirs, the increment of the former gradually decreases with the increase in the latter. The results also show that the presence of CO2in the formation would lower down gas production.

scholarly journals Nonlinear Seepage Model of Gas Transport in Multiscale Shale Gas Reservoirs and Productivity Analysis of Fractured Well

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Ting Huang ◽  
Xiao Guo ◽  
Kun Wang
Keyword(s):  
Gas Flow ◽  
Slip Flow ◽  
Gas Production ◽  
Productivity Analysis ◽  
Transition Flow ◽  
Gas Reservoirs ◽  
Slippage Effect ◽  
Wellbore Pressure ◽  
Fractured Well ◽  
And Diffusion

Shale is abundant in nanoscale pores, so gas flow in shales cannot be simply represented by Darcy formula anymore. It is crucial to figure out the influence of gas flow in nano/micro pores on actual productivity, which can provide basic theories for optimizing parameters and improving the gas production from engineering perspective. This paper considers the effects of slippage and diffusion in nanoscale based on Beskok-Karniadakis (BK) equation, which can be applicable for different flow regimes including continuum flow, slip flow, transition flow, and free-molecule flow. A new non-Darcy equation was developed based on the analysis of effects of high order terms of BK equation on permeability correction factor. By using the conformal transformation principle and pressure coupling method, we established the productivity formula of fractured well (infinite and limited conductivity) satisfying mass variable seepage flowing in fractures. The simulation results have been compared with field data and influencing parameters are analyzed thoroughly. It is concluded that slippage effect affects gas production of fractured well when wellbore pressure is less than 15 MPa, and the effects of slippage and diffusion have greater influence on gas production of fractured well for reservoir with smaller permeability, especially when permeability is at nano-Darcy scale.

scholarly journals A New Approach for Automatic Optimization of Complex Fracture Network in Shale Reservoirs

Lithosphere ◽  
2021 ◽  
Vol 2021 (Special 1) ◽  
Author(s):  
Haibo Wang ◽  
Tong Zhou ◽  
Fengxia Li
Keyword(s):  
Shale Gas ◽  
Flow Model ◽  
Optimization Method ◽  
Fracture Network ◽  
Gas Reservoirs ◽  
Fracture Length ◽  
Complex Fracture ◽  
Shale Gas Reservoirs ◽  
Automatic Optimization ◽  
Complex Fracture Network

Abstract Shale gas reservoirs have gradually become the main source for oil and gas production. The automatic optimization technology of complex fracture network in fractured horizontal wells is the key technology to realize the efficient development of shale gas reservoirs. In this paper, based on the flow model of shale gas reservoirs, the porosity/permeability of the matrix system and natural fracture system is characterized. The fracture network morphology is finely characterized by the fracture network expansion calculation method, and the flow model was proposed and solved. On this basis, the influence of matrix permeability, matrix porosity, fracture permeability, fracture porosity, and fracture length on the production of shale gas reservoirs is studied. The optimal design of fracture length and fracture location was carried, and the automatic optimization method of complex fracture network parameters based on simultaneous perturbation stochastic approximation (SPSA) was proposed. The method was applied in a shale gas reservoir, and the results showed that the proposed automatic optimization method of the complex fracture network in shale gas reservoirs can automatically optimize the parameters such as fracture location and fracture length and obtain the optimal fracture network distribution matching with geological conditions.

scholarly journals Investigation of the Main Factors During Shale-gas Production Using Grey Relational Analysis

2016 ◽  
Vol 9 (1) ◽  
pp. 207-215 ◽  
Author(s):  
Hongling Zhang ◽  
Jing Wang ◽  
Haiyong Zhang
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Fracture Conductivity ◽  
Matrix Permeability ◽  
Shale Gas Reservoirs ◽  
Main Factors ◽  
Grey Relational ◽  
The Impact ◽  
Half Length

Shale gas is one of the primary types of unconventional reservoirs to be exploited in search for long-lasting resources. Production from shale gas reservoirs requires horizontal drilling with hydraulic fracturing to achieve the most economic production. However, plenty of parameters (e.g., fracture conductivity, fracture spacing, half-length, matrix permeability, and porosity,etc) have high uncertainty that may cause unexpected high cost. Therefore, to develop an efficient and practical method for quantifying uncertainty and optimizing shale-gas production is highly desirable. This paper focuses on analyzing the main factors during gas production, including petro-physical parameters, hydraulic fracture parameters, and work conditions on shale-gas production performances. Firstly, numerous key parameters of shale-gas production from the fourteen best-known shale gas reservoirs in the United States are selected through the correlation analysis. Secondly, a grey relational grade method is used to quantitatively estimate the potential of developing target shale gas reservoirs as well as the impact ranking of these factors. Analyses on production data of many shale-gas reservoirs indicate that the recovery efficiencies are highly correlated with the major parameters predicted by the new method. Among all main factors, the impact ranking of major factors, from more important to less important, is matrix permeability, fracture conductivity, fracture density of hydraulic fracturing, reservoir pressure, total organic content (TOC), fracture half-length, adsorbed gas, reservoir thickness, reservoir depth, and clay content. This work can provide significant insights into quantifying the evaluation of the development potential of shale gas reservoirs, the influence degree of main factors, and optimization of shale gas production.

scholarly journals An Analytical Method for Parameter Interpretation of Fracture Networks in Shale Gas Reservoirs considering Uneven Support of Fractures

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Shijun Huang ◽  
Jiaojiao Zhang ◽  
Sidong Fang ◽  
Xifeng Wang
Keyword(s):  
Data Analysis ◽  
Shale Gas ◽  
Analytical Method ◽  
Material Balance ◽  
Gas Production ◽  
Production Data ◽  
Analysis Method ◽  
Gas Reservoirs ◽  
Data Analysis Method ◽  
Parameter Interpretation

In shale gas reservoirs, the production data analysis method is widely used to invert reservoir and fracture parameter, and productivity prediction. Compared with numerical models and semianalytical models, which have high computational cost, the analytical model is mostly used in the production data analysis method to characterize the complex fracture network formed after fracturing. However, most of the current calculation models ignore the uneven support of fractures, and most of them use a single supported fracture model to describe the flow characteristics, which magnifies the role of supported fracture to a certain extent. Therefore, in this study, firstly, the fractures are divided into supported fractures and unsupported fractures. According to the near-well supported fractures and far-well unsupported fractures, the SRV zone is divided into outer SRV and inner SRV. The four areas are characterized by different seepage models, and the analytical solutions of the models are obtained by Laplace transform and inverse transform. Secondly, the material balance pseudotime is introduced to process the production data under the conditions of variable production and variable pressure. The double logarithmic curves of normalized production rate, rate integration, the derivative of the integration, and material balance pseudotime are established, and the parameters are interpreted by fitting the theoretical curve to the measured data. Then, the accuracy of the method is verified by comparison the parameter interpretation results with well test results, and the influence of parameters such as the half-length and permeability of supported and unsupported fractures on gas production is analyzed. Finally, the proposed method is applied to four field cases in southwest China. This paper mainly establishes an analytical method for parameter interpretation after hydraulic fracturing based on the production data analysis method considering the uneven support of fractures, which is of great significance for understanding the mechanism of fracturing stimulation, optimization of fracturing parameters, and gas production forecast.

Study Evaluates Fracturing Interference for Multiwell Pads in Shale Gas Reservoirs

2021 ◽  
Vol 73 (08) ◽  
pp. 67-68
Author(s):  
Chris Carpenter
Keyword(s):  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Technical Conference ◽  
Gas Production ◽  
Gas Reservoirs ◽  
Well Drilling ◽  
Recovery Potential ◽  
Shale Gas Reservoirs ◽  
Well Spacing ◽  
Southwest Region

This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 201694, “Interwell Fracturing Interference Evaluation of Multiwell Pads in Shale Gas Reservoirs: A Case Study in WY Basin,” by Youwei He, SPE, Jianchun Guo, SPE, and Yong Tang, Southwest Petroleum University, et al., prepared for the 2020 SPE Annual Technical Conference and Exhibition, originally scheduled to be held in Denver, Colorado, 5–7 October. The paper has not been peer reviewed. The paper aims to determine the mechanisms of fracturing interference for multiwell pads in shale gas reservoirs and evaluate the effect of interwell fracturing interference on production. Field data of 56 shale gas wells in the WY Basin are applied to calculate the ratio of affected wells to newly fractured wells and understand its influence on gas production. The main controlling factors of fracturing interference are determined, and the interwell fracturing interacting types are presented. Production recovery potential for affected wells is analyzed, and suggestions for mitigating fracturing interference are proposed. Interwell Fracturing Interference Evaluation The WY shale play is in the southwest region of the Sichuan Basin, where shale gas reserves in the Wufeng-Longmaxi formation are estimated to be the highest in China. The reservoir has produced hydrocarbons since 2016. Infill well drilling and massive hydraulic fracturing operations have been applied in the basin. Each well pad usually is composed of six to eight multifractured horizontal wells (MFHWs). Well spacing within one pad, or the distance between adjacent well pads, is so small that fracture interference can occur easily between infill wells and parent wells. Fig. 1 shows the number of wells affected by in-fill well fracturing from 2016 to 2019 in the basin. As the number of newly drilled wells increased between 2017 and 2019, the number of wells affected by hydraulic fracturing has greatly increased. The number of wells experiencing fracturing interaction has reached 65 in the last 4 years at the time of writing.

scholarly journals Numerical Simulation of Shale Gas Multiscale Seepage Mechanism-Coupled Stress Sensitivity

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Xun Yan ◽  
Jing Sun ◽  
Dehua Liu
Keyword(s):  
Shale Gas ◽  
Gas Flow ◽  
Gas Transport ◽  
Sensitivity Coefficient ◽  
Stress Sensitivity ◽  
Gas Production ◽  
Molecular Flow ◽  
Adsorption Phenomenon ◽  
Gas Seepage ◽  
The Impact

The complexity of the gas transport mechanism in microfractures and nanopores is caused by the feature of multiscale and multiphysics. Figuring out the flow mechanism is of great significance for the efficient development of shale gas. In this paper, an apparent permeability model which covers continue, slip, transition, and molecular flow and geomechanical effect was presented. Additionally, a mathematical model comprising multiscale, geomechanics, and adsorption phenomenon was proposed to characterize gas flow in the shale reservoir. The aim of this paper is to investigate some important impacts in the process of gas transportation, which includes the shale stress sensitivity, adsorption phenomenon, and reservoir porosity. The results reveal that the performance of the multistage fractured horizontal well is strongly influenced by stress sensitivity coefficient. The cumulative gas production will decrease sharply when the shale gas reservoir stress sensitivity coefficient increases. In addition, the adsorption phenomenon has an influence on shale gas seepage and sorption capacity; however, the effect of adsorption is very weak in the early gas transport period, and the impact of later will increase. Moreover, shale porosity also greatly affects the shale gas transportation.

scholarly journals Analysis of the Influence of Different Fracture Network Structures on the Production of Shale Gas Reservoirs

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Ming Yue ◽  
Xiaohe Huang ◽  
Fanmin He ◽  
Lianzhi Yang ◽  
Weiyao Zhu ◽  
...  
Keyword(s):  
Finite Element ◽  
Shale Gas ◽  
Flow Direction ◽  
Fracture Network ◽  
Gas Production ◽  
Low Flow ◽  
Gas Reservoirs ◽  
Gas Reservoir ◽  
Shale Gas Reservoir ◽  
Gas Seepage

Volume fracturing is a key technology in developing unconventional gas reservoirs that contain nano/micron pores. Different fracture structures exert significantly different effects on shale gas production, and a fracture structure can be learned only in a later part of detection. On the basis of a multiscale gas seepage model considering diffusion, slippage, and desorption effects, a three-dimensional finite element algorithm is developed. Two finite element models for different fracture structures for a shale gas reservoir in the Sichuan Basin are established and studied under the condition of equal fracture volumes. One is a tree-like fracture, and the other is a lattice-like fracture. Their effects on the production of a fracture network structure are studied. Numerical results show that under the same condition of equal volumes, the production of the tree-like fracture is higher than that of the lattice-like fracture in the early development period because the angle between fracture branches and the flow direction plays an important role in the seepage of shale gas. In the middle and later periods, owing to a low flow rate, the production of the two structures is nearly similar. Finally, the lattice-like fracture model is regarded as an example to analyze the factors of shale properties that influence shale gas production. The analysis shows that gas production increases along with the diffusion coefficient and matrix permeability. The increase in permeability leads to a larger increase in production, but the decrease in permeability leads to a smaller decrease in production, indicating that the contribution of shale gas production is mainly fracture. The findings of this study can help better understand the influence of different shapes of fractures on the production in a shale gas reservoir.

Sign in / Sign up

Export Citation Format

Share Document