scholarly journals Hyperspectral Imaging Coupled with Random Frog and Calibration Models for Assessment of Total Soluble Solids in Mulberries

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Yan-Ru Zhao ◽  
Ke-Qiang Yu ◽  
Yong He
Keyword(s):  
Spatial Distribution ◽  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Least Square ◽  
Soluble Solids ◽  
Internal Quality ◽  
Support Vector ◽  
Total Soluble Solids ◽  
Mulberry Fruits

Chemometrics methods coupled with hyperspectral imaging technology in visible and near infrared (Vis/NIR) region (380–1030 nm) were introduced to assess total soluble solids (TSS) in mulberries. Hyperspectral images of 310 mulberries were acquired by hyperspectral reflectance imaging system (512 bands) and their corresponding TSS contents were measured by a Brix meter. Random frog (RF) method was used to select important wavelengths from the full wavelengths. TSS values in mulberry fruits were predicted by partial least squares regression (PLSR) and least-square support vector machine (LS-SVM) models based on full wavelengths and the selected important wavelengths. The optimal PLSR model with 23 important wavelengths was employed to visualise the spatial distribution of TSS in tested samples, and TSS concentrations in mulberries were revealed through the TSS spatial distribution. The results declared that hyperspectral imaging is promising for determining the spatial distribution of TSS content in mulberry fruits, which provides a reference for detecting the internal quality of fruits.

Hyperspectral Imaging for Predicting Soluble Solid Content of Starfruit

2015 ◽  
Vol 73 (1) ◽  
Author(s):  
Feri Candra ◽  
Syed Abd. Rahman Abu Bakar
Keyword(s):  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Solid Content ◽  
Partial Least Square ◽  
Least Square ◽  
Coefficient Of Determination ◽  
Soluble Solid Content ◽  
Calibration Model ◽  
Soluble Solid

Hyperspectral imaging technology is a powerful tool for non-destructive quality assessment of fruits. The objective of this research was to develop novel calibration model based on hyperspectral imaging to estimate soluble solid content (SSC) of starfruits. A hyperspectral imaging system, which consists of a near infrared  camera, a spectrograph V10, a halogen lighting and a conveyor belt system, was used in this study to acquire hyperspectral  images of the samples in visible and near infrared (500-1000 nm) regions. Partial least square (PLS) was used to build the model and to find the optimal wavelength. Two different masks were applied for obtaining the spectral data. The optimal wavelengths were evaluated using multi linear regression (MLR). The coefficient of determination (R2) for validation using the model with first mask (M1) and second mask (M2) were 0.82 and 0.80, respectively.

scholarly journals Development of Visible/Near-Infrared Hyperspectral Imaging for the Prediction of Total Arsenic Concentration in Soil

2020 ◽  
Vol 10 (8) ◽  
pp. 2941 ◽  
Author(s):  
Lifei Wei ◽  
Yangxi Zhang ◽  
Ziran Yuan ◽  
Zhengxiang Wang ◽  
Feng Yin ◽  
...  
Keyword(s):  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Arsenic Concentration ◽  
Rank Correlation ◽  
Soil Samples ◽  
Support Vector ◽  
Atomic Fluorescence Spectrometry ◽  
Total Arsenic ◽  
Spearman’S Rank Correlation

Soil total arsenic (TAs) contamination caused by human activities—such as mining, smelting, and agriculture—is a problem of global concern. Visible/near-infrared (VNIR), X-ray fluorescence spectroscopy (XRF), and laser-induced breakdown spectroscopy (LIBS) do not need too much sample preparation and utilization of chemicals to evaluate total arsenic (TAs) concentration in soil. VNIR with hyperspectral imaging has the potential to predict TAs concentration in soil. In this study, 59 soil samples were collected from the Daye City mining area of China, and hyperspectral imaging of the soil samples was undertaken using a visible/near-infrared hyperspectral imaging system (wavelength range 470–900 nm). Spectral preprocessing included standard normal variate (SNV) transformation, multivariate scatter correction (MSC), first derivative (FD) preprocessing, and second derivative (SD) preprocessing. Characteristic bands were then identified based on Spearman’s rank correlation coefficients. Four regression models were used for the modeling prediction: partial least squares regression (PLSR) (R2 = 0.71, RMSE = 0.48), support vector machine regression (SVMR) (R2 = 0.78, RMSE = 0.42), random forest (RF) (R2 = 0.78, RMSE = 0.42), and extremely randomized trees regression (ETR) (R2 = 0.81, RMSE = 0.38). The prediction results were compared with the results of atomic fluorescence spectrometry methods. In the prediction results of the models, the accuracy of ETR using FD preprocessing was the highest. The results confirmed that hyperspectral imaging combined with Spearman’s rank correlation with machine learning models can be used to estimate soil TAs content.

scholarly journals Detection of Sulfite Dioxide Residue on the Surface of Fresh-Cut Potato Slices Using Near-Infrared Hyperspectral Imaging System and Portable Near-Infrared Spectrometer

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1651 ◽  
Author(s):  
Xiulin Bai ◽  
Qinlin Xiao ◽  
Lei Zhou ◽  
Yu Tang ◽  
Yong He
Keyword(s):  
Sulfur Dioxide ◽  
Hyperspectral Imaging ◽  
Classification Accuracy ◽  
Near Infrared ◽  
Imaging System ◽  
Principal Component ◽  
Support Vector ◽  
Svm Model ◽  
Fresh Cut ◽  
Potato Slices

Sodium pyrosulfite is a browning inhibitor used for the storage of fresh-cut potato slices. Excessive use of sodium pyrosulfite can lead to sulfur dioxide residue, which is harmful for the human body. The sulfur dioxide residue on the surface of fresh-cut potato slices immersed in different concentrations of sodium pyrosulfite solution was classified by near-infrared hyperspectral imaging (NIR-HSI) system and portable near-infrared (NIR) spectrometer. Principal component analysis was used to analyze the object-wise spectra, and support vector machine (SVM) model was established. The classification accuracy of calibration set and prediction set were 98.75% and 95%, respectively. Savitzky–Golay algorithm was used to recognize the important wavelengths, and SVM model was established based on the recognized important wavelengths. The final classification accuracy was slightly less than that based on the full spectra. In addition, the pixel-wise spectra extracted from NIR-HSI system could realize the visualization of different samples, and intuitively reflect the differences among the samples. The results showed that it was feasible to classify the sulfur dioxide residue on the surface of fresh-cut potato slices immersed in different concentration of sodium pyrosulfite solution by NIR spectra. It provided an alternative method for the detection of sulfur dioxide residue on the surface of fresh-cut potato slices.

scholarly journals Non-Destructive Detection Pilot Study of Vegetable Organic Residues Using VNIR Hyperspectral Imaging and Deep Learning Techniques

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2899
Author(s):  
Youngwook Seo ◽  
Giyoung Kim ◽  
Jongguk Lim ◽  
Ahyeong Lee ◽  
Balgeum Kim ◽  
...  
Keyword(s):  
Deep Learning ◽  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Imaging System ◽  
Imaging Technique ◽  
Support Vector ◽  
Organic Residues ◽  
Efficient Detection ◽  
Non Destructive

Contamination is a critical issue that affects food consumption adversely. Therefore, efficient detection and classification of food contaminants are essential to ensure food safety. This study applied a visible and near-infrared (VNIR) hyperspectral imaging technique to detect and classify organic residues on the metallic surfaces of food processing machinery. The experimental analysis was performed by diluting both potato and spinach juices to six different concentration levels using distilled water. The 3D hypercube data were acquired in the range of 400–1000 nm using a line-scan VNIR hyperspectral imaging system. Each diluted residue in the spectral domain was detected and classified using six classification methods, including a 1D convolutional neural network (CNN-1D) and five pre-processing methods. Among them, CNN-1D exhibited the highest classification accuracy, with a 0.99 and 0.98 calibration result and a 0.94 validation result for both spinach and potato residues. Therefore, in comparison with the validation accuracy of the support vector machine classifier (0.9 and 0.92 for spinach and potato, respectively), the CNN-1D technique demonstrated improved performance. Hence, the VNIR hyperspectral imaging technique with deep learning can potentially afford rapid and non-destructive detection and classification of organic residues in food facilities.

Rapid Determining Contents of the Rhubarb Anthraquinones Compounds by Support Vector Machines Modeling based on Near Infrared Spectra

2020 ◽  
Vol 16 ◽  
Author(s):  
Linqi Liu ◽  
JInhua Luo ◽  
Chenxi Zhao ◽  
Bingxue Zhang ◽  
Wei Fan ◽  
...  
Keyword(s):  
Infrared Spectra ◽  
Near Infrared ◽  
Mean Squared Error ◽  
Rapid Determination ◽  
Partial Least Square ◽  
Least Square ◽  
Support Vector ◽  
Near Infrared Spectra ◽  
Aloe Emodin ◽  
Relative Differences

BACKGROUND: Measuring medicinal compounds to evaluate their quality and efficacy has been recognized as a useful approach in treatment. Rhubarb anthraquinones compounds (mainly including aloe-emodin, rhein, emodin, chrysophanol and physcion) are its main effective components as purgating drug. In the current Chinese Pharmacopoeia, the total anthraquinones content is designated as its quantitative quality and control index while the content of each compound has not been specified. METHODS: On the basis of forty rhubarb samples, the correlation models between the near infrared spectra and UPLC analysis data were constructed using support vector machine (SVM) and partial least square (PLS) methods according to Kennard and Stone algorithm for dividing the calibration/prediction datasets. Good models mean they have high correlation coefficients (R2) and low root mean squared error of prediction (RMSEP) values. RESULTS: The models constructed by SVM have much better performance than those by PLS methods. The SVM models have high R2 of 0.8951, 0.9738, 0.9849, 0.9779, 0.9411 and 0.9862 that correspond to aloe-emodin, rhein, emodin, chrysophanol, physcion and total anthraquinones contents, respectively. The corresponding RMSEPs are 0.3592, 0.4182, 0.4508, 0.7121, 0.8365 and 1.7910, respectively. 75% of the predicted results have relative differences being lower than 10%. As for rhein and total anthraquinones, all of the predicted results have relative differences being lower than 10%. CONCLUSION: The nonlinear models constructed by SVM showed good performances with predicted values close to the experimental values. This can perform the rapid determination of the main medicinal ingredients in rhubarb medicinal materials.

scholarly journals Identification of peat type and humification by laboratory VNIR/SWIR hyperspectral imaging of peat profiles with focus on fen-bog transition in aapa mires

2020 ◽  
Author(s):  
L. Granlund ◽  
M. Keinänen ◽  
T. Tahvanainen
Keyword(s):  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Support Vector ◽  
High Resolution Imaging ◽  
Factors Affecting ◽  
Vector Machines ◽  
Resolution Imaging ◽  
Shortwave Infrared ◽  
Type Classification ◽  
Wide Potential

Abstract Aims Hyperspectral imaging (HSI) has high potential for analysing peat cores, but methodologies are deficient. We aimed for robust peat type classification and humification estimation. We also explored other factors affecting peat spectral properties. Methods We used two laboratory setups: VNIR (visible to near-infrared) and SWIR (shortwave infrared) for high resolution imaging of intact peat profiles with fen-bog transitions. Peat types were classified with support vector machines, indices were developed for von Post estimation, and K-means clustering was used to analyse stratigraphic patterns in peat quality. With separate experiments, we studied spectral effects of drying and oxidation. Results Despite major effects, oxidation and water content did not impede robust HSI classification. The accuracy between Carex peat and Sphagnum peat in validation was 80% with VNIR and 81% with SWIR data. The spectral humification indices had accuracies of 82% with VNIR and 56%. Stratigraphic HSI patterns revealed that 36% of peat layer shifts were inclined by over 20 degrees. Spectral indices were used to extrapolate visualisations of element concentrations. Conclusions HSI provided reliable information of basic peat quality and was useful in visual mapping, that can guide sampling for other analyses. HSI can manage large amounts of samples to widen the scope of detailed analysis beyond single profiles and it has wide potential in peat research beyond the exploratory scope of this paper. We were able to confirm the capacity of HSI to reveal shifts of peat quality, connected to ecosystem-scale change.

Spatial distribution of total polyphenols in multi-type of tea using near-infrared hyperspectral imaging

LWT ◽  
2021 ◽  
pp. 111737
Author(s):  
Yujie Wang ◽  
Ying Liu ◽  
Yuyu Chen ◽  
Qingqing Cui ◽  
Luqing Li ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Hyperspectral Imaging ◽  
Near Infrared ◽  
Total Polyphenols
Sign in / Sign up

Export Citation Format

Share Document