scholarly journals Nanocrystallization of Vanadium Borophosphate Glass for Improving the Electrical and Catalytic Properties

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Su-Yeon Choi ◽  
Bong-Ki Ryu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Catalytic Effect ◽  
Xrd Analysis ◽  
Annealed Sample ◽  
Molecular Volume ◽  
X Ray ◽  
Valence States ◽  
Heat Treated ◽  
Structural And Electrical Properties

75V2O5-10P2O5-15B2O3ternary-system glasses were prepared and nanocrystallized to examine the catalytic effect and the variations in their structural and electrical properties. These glasses were annealed in a graphite mold above the glass transition temperature for 2 h and heat-treated at the crystallization temperature for 1, 3, and 5 h. Fourier transform infrared spectroscopy (FTIR) was used to analyze the structural changes in the B-O bonds after nanocrystallization, while X-ray photoelectron spectroscopy (XPS) analysis showed a decrease in V5+and an increase in V4+. X-ray diffraction (XRD) analysis of the structure array (BO3+ V2O5  ↔BO4+ 2VO2) verified these inferred changes. Structural changes induced by the heat treatment were confirmed by analyzing the molecular volume determined from the sample density. Conductivity and catalytic effects were discussed based on the migration of vanadate ions with different valence states due to the increase in VO2nanocrystallinity at 275°C. Both conductance and the catalytic effect were higher after nanocrystallization at 275°C for 1 h compared to the annealed sample. Furthermore, compared to the sample heat-treated for 1 h, the conductance and catalytic effect were increased and decreased, respectively, for samples nanocrystallized at 275°C for 3 and 5 h.

scholarly journals A novel and potentially scalable CVD-based route towards SnO2:Mo thin films as transparent conducting oxides

2021 ◽  
Author(s):  
Tianlei Ma ◽  
Marek Nikiel ◽  
Andrew G. Thomas ◽  
Mohamed Missous ◽  
David J. Lewis
Keyword(s):  
Thin Films ◽  
Photoelectron Spectroscopy ◽  
Mixed Valence ◽  
Chemical Vapour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Conducting Oxides ◽  
Valence States ◽  
3 Omega ◽  
First Time

AbstractIn this report, we prepared transparent and conducting undoped and molybdenum-doped tin oxide (Mo–SnO2) thin films by aerosol-assisted chemical vapour deposition (AACVD). The relationship between the precursor concentration in the feed and in the resulting films was studied by energy-dispersive X-ray spectroscopy, suggesting that the efficiency of doping is quantitative and that this method could potentially impart exquisite control over dopant levels. All SnO2 films were in tetragonal structure as confirmed by powder X-ray diffraction measurements. X-ray photoelectron spectroscopy characterisation indicated for the first time that Mo ions were in mixed valence states of Mo(VI) and Mo(V) on the surface. Incorporation of Mo6+ resulted in the lowest resistivity of $$7.3 \times 10^{{ - 3}} \Omega \,{\text{cm}}$$ 7.3 × 10 - 3 Ω cm , compared to pure SnO2 films with resistivities of $$4.3\left( 0 \right) \times 10^{{ - 2}} \Omega \,{\text{cm}}$$ 4.3 0 × 10 - 2 Ω cm . Meanwhile, a high transmittance of 83% in the visible light range was also acquired. This work presents a comprehensive investigation into impact of Mo doping on SnO2 films synthesised by AACVD for the first time and establishes the potential for scalable deposition of SnO2:Mo thin films in TCO manufacturing. Graphical abstract

scholarly journals Pore Modification and Phosphorus Doping Effect on Phosphoric Acid-Activated Fe-N-C for Alkaline Oxygen Reduction Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1519
Author(s):  
Jong Gyeong Kim ◽  
Sunghoon Han ◽  
Chanho Pak
Keyword(s):  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Electronic States ◽  
Nitrogen Adsorption ◽  
Reduction Reaction ◽  
Phosphorus Doping ◽  
X Ray ◽  
Precious Metal Catalysts ◽  
Adsorption Desorption

The price and scarcity of platinum has driven up the demand for non-precious metal catalysts such as Fe-N-C. In this study, the effects of phosphoric acid (PA) activation and phosphorus doping were investigated using Fe-N-C catalysts prepared using SBA-15 as a sacrificial template. The physical and structural changes caused by the addition of PA were analyzed by nitrogen adsorption/desorption and X-ray diffraction. Analysis of the electronic states of Fe, N, and P were conducted by X-ray photoelectron spectroscopy. The amount and size of micropores varied depending on the PA content, with changes in pore structure observed using 0.066 g of PA. The electronic states of Fe and N did not change significantly after treatment with PA, and P was mainly found in states bonded to oxygen or carbon. When 0.135 g of PA was introduced per 1 g of silica, a catalytic activity which was increased slightly by 10 mV at −3 mA/cm2 was observed. A change in Fe-N-C stability was also observed through the introduction of PA.

scholarly journals Yttrium doped phosphate-based glasses: structural and degradation analyses

2020 ◽  
Vol 6 (1) ◽  
pp. 34-49
Author(s):  
Abul Arafat ◽  
Sabrin A. Samad ◽  
Jeremy J. Titman ◽  
Andrew L. Lewis ◽  
Emma R. Barney ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Xrd Analysis ◽  
Calcium Pyrophosphate ◽  
Ion Release ◽  
Subsequent Increase ◽  
Structural Characterisation ◽  
Release Studies ◽  
Degradation Properties

AbstractThis study investigates the role of yttrium in phosphate-based glasses in the system 45(P2O5)–25(CaO)– (30-x)(Na2O)–x(Y2O3) (0≤x≤5) prepared via melt quenching and focuses on their structural characterisation and degradation properties. The structural analyses were performed using a combination of solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). 31P NMR analysis showed that depolymerisation of the phosphate network occurred which increased with Y2O3 content as metaphosphate units (Q2) decreased with subsequent increase in pyrophosphate species (Q1). The NMR results correlated well with structural changes observed via FTIR and XPS analyses. XRD analysis of crystallised glass samples revealed the presence of calcium pyrophosphate (Ca2P2O7) and sodium metaphosphate (NaPO3) phases for all the glass formulations explored. Yttrium-containing phases were found for the formulations containing 3 and 5 mol% Y2O3. Degradation analyses performed in Phosphate buffer saline (PBS) and Milli-Q water revealed significantly reduced rates with addition of Y2O3 content. This decrease was attributed to the formation of Y-O-P bonds where the octahedral structure of yttrium (YO6) cross-linked phosphate chains, subsequently leading to an increase in chemical durability of the glasses. The ion release studies also showed good correlation with the degradation profiles.

scholarly journals An Insight into Chemistry and Structure of Colloidal 2D-WS2 Nanoflakes: Combined XPS and XRD Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1969
Author(s):  
Riccardo Scarfiello ◽  
Elisabetta Mazzotta ◽  
Davide Altamura ◽  
Concetta Nobile ◽  
Rosanna Mastria ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Xrd Analysis ◽  
Crystal Habit ◽  
Phase Identification ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Evaluation ◽  
Rational Understanding ◽  
Structural Inspection

The surface and structural characterization techniques of three atom-thick bi-dimensional 2D-WS2 colloidal nanocrystals cross the limit of bulk investigation, offering the possibility of simultaneous phase identification, structural-to-morphological evaluation, and surface chemical description. In the present study, we report a rational understanding based on X-ray photoelectron spectroscopy (XPS) and structural inspection of two kinds of dimensionally controllable 2D-WS2 colloidal nanoflakes (NFLs) generated with a surfactant assisted non-hydrolytic route. The qualitative and quantitative determination of 1T’ and 2H phases based on W 4f XPS signal components, together with the presence of two kinds of sulfur ions, S22− and S2−, based on S 2p signal and related to the formation of WS2 and WOxSy in a mixed oxygen-sulfur environment, are carefully reported and discussed for both nanocrystals breeds. The XPS results are used as an input for detailed X-ray Diffraction (XRD) analysis allowing for a clear discrimination of NFLs crystal habit, and an estimation of the exact number of atomic monolayers composing the 2D-WS2 nanocrystalline samples.

Comparative Study of Time-Dependent PAES and XPS on a Ni/Pd Surface

2017 ◽  
Vol 373 ◽  
pp. 313-316 ◽  
Author(s):  
Samantha Zimnik ◽  
Christian Piochacz ◽  
Sebastian Vohburger ◽  
Christoph Hugenschmidt
Keyword(s):  
Photoelectron Spectroscopy ◽  
Electron Spectroscopy ◽  
Auger Electron ◽  
Structural Changes ◽  
Time Dependent ◽  
Xps Analysis ◽  
Time Constants ◽  
X Ray ◽  
Residual Gas ◽  
Rule Out

We report on time-dependent Positron annihilation induced Auger Electron Spectroscopy (PAES) study on 0.5 monolayers (ML) Ni on polycrystalline Pd accompanied by complementary X-ray induced Photoelectron Spectroscopy (XPS). The normalized PAES spectra showed a significant decrease in the Ni intensity and an increase in the Pd intensity as a function of time. To rule out varying influence on the elements e.g. from surface contaminates due to the residual gas, a time-dependent XPS analysis was performed on pure Ni and Pd as well as to analyze the main contaminants C and O. The O fraction was found to be constant within the measurement time and the time constants for C significantly differ from those of Ni and Pd in the PAES data. Consequently, it was concluded that the PAES data show a superposition of C contamination and structural changes at the surface of Ni/Pd.

Deposition of Cobalt Doped Zinc Oxide Thin Film Nano-Composites Via Pulsed Electron Beam Ablation

MRS Advances ◽  
2016 ◽  
Vol 1 (6) ◽  
pp. 433-439 ◽  
Author(s):  
Asghar Ali ◽  
Patrick Morrow ◽  
Redhouane Henda ◽  
Ragnar Fagerberg
Keyword(s):  
Zinc Oxide ◽  
Electron Beam ◽  
Binding Energy ◽  
Photoelectron Spectroscopy ◽  
Xrd Analysis ◽  
Sem Analysis ◽  
Oxide Thin Film ◽  
X Ray ◽  
Pulsed Electron Beam ◽  
Deposited Films

AbstractThis study reports on the preparation of cobalt doped zinc oxide (Co:ZnO) films via pulsed electron beam ablation (PEBA) from a single target containing 20 w% Co on sapphire (0001) and silicon (100) substrates. The films have been deposited at various temperatures (350оC, 400оC, 450оC) and pulse frequencies (2 Hz, 4 Hz), under a background argon (Ar) pressure of about 3 mtorr, and an accelerating voltage of 14 kV. The surface morphology has been examined by atomic force microscopy (AFM) and scanning electron microscopy (SEM). According to SEM analysis, the films consist of nano-globules whose size is in the range of 80-178 nm. Energy dispersive x-ray spectroscopy (EDX) reveals that deposition is congruent and the prepared films contain ∼20±5 w% cobalt. It has been found that the nano-globules in the deposited films are cobalt-rich zones containing ∼70 w% Co. From x-ray photoelectron spectroscopy (XPS) analysis, Co 2p3/2 peaks indicate that the deposited films contain CoO (binding energy = 780.5 eV) as well as metallic Co (binding energy = 778.1-778.5 eV). X-ray diffraction (XRD) analysis supports the presence of metallic Co hcp phase (2ϴ = 44.47° and 47.43°) in the films.

scholarly journals Copper Containing Glass-Based Bone Adhesives for Orthopaedic Applications: Glass Characterization and Advanced Mechanical Evaluation

2020 ◽  
Author(s):  
Sahar. Mokhtari ◽  
Anthony.W. Wren
Keyword(s):  
Mechanical Properties ◽  
Photoelectron Spectroscopy ◽  
Structural Changes ◽  
Viscoelastic Behavior ◽  
Polymer Chains ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Compression Data

AbstractThis study addresses issues with currently used bone adhesives, by producing novel glass based skeletal adhesives through modification of the base glass composition to include copper (Cu) and by characterizing each glass with respect to structural changes. Bioactive glasses have found applications in fields such as orthopedics and dentistry, where they have been utilized for the restoration of bone and teeth. The present work outlines the formation of flexible organic-inorganic polyacrylic acid (PAA) – glass hybrids, commercial forms are known as glass ionomer cements (GICs). Initial stages of this research will involve characterization of the Cu-glasses, significant to evaluate the properties of the resulting adhesives. Scanning electron microscopy (SEM) of annealed Cu glasses indicates the presence of partial crystallization in the glass. The structural analysis of the glass using Raman suggests the formation of CuO nanocrystals on the surface. X-ray diffraction (XRD) pattern and X-ray photoelectron spectroscopy (XPS) further confirmed the formation of crystalline CuO phases on the surface of the annealed Cu-glass. The setting reaction was studied using Fourier transform infrared spectroscopy (ATR-FTIR). The mechanical properties of the Cu containing adhesives exhibited gel viscoelastic behavior and enhanced mechanical properties when compared to the control composition. Compression data indicated the Cu glass adhesives were efficient at energy dissipation due to the reversible interactions between CuO nano particles and PAA polymer chains.

scholarly journals Ostrich eggshell as calcium source for the synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc

Cerâmica ◽  
2016 ◽  
Vol 62 (364) ◽  
pp. 386-391 ◽  
Author(s):  
J. R. M. Ferreira ◽  
L. H. L. Louro ◽  
A. M. Costa ◽  
J. B. de Campos ◽  
M. H. Prado da Silva
Keyword(s):  
Xrd Analysis ◽  
Quantitative Chemical Analysis ◽  
X Ray Diffraction ◽  
Spectroscopy Technique ◽  
X Ray ◽  
Heat Treated ◽  
Before And After ◽  
Calcium Source ◽  
The Fourier Transform ◽  
Ostrich Eggshell

Abstract In the present study, hydroxyapatite and Zn-substituted hydroxyapatite powders were synthesized using ostrich eggshell as a calcium source. The samples were analyzed by scanning electron microscopy with field emission gun, and X-ray diffraction (XRD) to identify the present phases, and X-ray fluorescence spectroscopy for quantitative chemical analysis of the synthesized and heat treated powders. The Fourier transform infrared spectroscopy technique was used before and after heat treatments at 700, 900 and 1100 °C in order to identify the functional groups present, as an additional technique to the XRD analysis. The results presented in this study represent a promising method for synthesis of hydroxyapatite and hydroxyapatite partially substituted with zinc, since the results showed no undesirable phases or impurities in the produced powders. It was observed that Zn-substituted hydroxyapatite showed higher thermal stability, when compared to pure hydroxyapatite.

scholarly journals Preparation and Photocatalytic Performances of WO3/TiO2 Composite Nanofibers

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Xiuping Han ◽  
Binghua Yao ◽  
Keying Li ◽  
Wenjing Zhu ◽  
Xuyuan Zhang
Keyword(s):  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Composite Nanofibers ◽  
Photogenerated Electron ◽  
Xrd Analysis ◽  
Catalytic Performance ◽  
Active Species ◽  
X Ray ◽  
Bet Analysis ◽  
Electron Holes

The use of sunlight for photocatalytic oxidation is an ideal strategy, but it is limited by factors such as insufficient light absorption intensity of the photocatalyst and easy recombination of photogenerated electron holes. TiO2 is favored by researchers as an environment-friendly catalyst. In this paper, TiO2 is combined with WO3 to obtain a nanofiber with excellent catalytic performance under sunlight. The WO3/TiO2 composite nanofibers were synthesized by using the electrospinning method. The X-ray diffraction (XRD) analysis indicated that WO3 was successfully integrated onto the surface of TiO2. The photodegradation performance and photocurrent analysis of the prepared nanofibers showed that the addition of WO3 really improved the photocatalytic performance of TiO2 nanofibers, methylene blue (MB) degradation rate increased from 72% to 96%, and 5% was the optimal composite mole percentage of W to Ti. The scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectra (UV-Vis DRS), and Brunauer-Emmett-Teller (BET) analysis further characterized the properties of 5% WO3/TiO2 nanofibers. The H2 generation rate of 5% WO3/TiO2 nanofibers was 107.15 μmol·g−1·h−1, in comparison with that of TiO2 nanofibers (73.21 μmol·g−1·h−1) under the same condition. The 5% WO3/TiO2 produced ·OH under illumination, which played an important role in the MB degradation. Also, the enhanced photocatalytic mechanism was also proposed based on the detailed analysis of the band gap and the active species trapping experiment. The results indicated that the effective separation of Z-scheme photogenerated electron-hole pairs and transfer system constructed between TiO2 and WO3 endowed the excellent photocatalytic activity of 5% WO3/TiO2 nanofibers.

scholarly journals Tribological properties of MoS2 coating for ultra-long wear-life and low coefficient of friction combined with additive g-C3N4 in air

Friction ◽  
2020 ◽  
Author(s):  
Yupeng Zhang ◽  
Panpan Li ◽  
Li Ji ◽  
Xiaohong Liu ◽  
Hongqi Wan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Solid Lubricant ◽  
Sliding Friction ◽  
Friction Mechanism ◽  
X Ray ◽  
Lubricating Film ◽  
Valence States ◽  
Transmission Electron ◽  
Wear Life

Abstract The solid lubricant MoS2 demonstrates excellent lubricating properties, but it spontaneously oxidizes and absorbs moisture in air, and thus results in poor wear resistance and short wear-life. In this study, the additive g-C3N4 (CN) was successfully combined with MoS2 via hydrothermal synthesis as a solid lubricant for the first time. Meanwhile, a low friction coefficient (COF, μ = 0.031) and ultra-long wear-life of CN/MoS2 compared to pure MoS2 in air were demonstrated. The functional groups and good crystallinity of the lubricant material were characterized via Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD). The formed valence states in CN/MoS2 were analyzed via X-ray photoelectron spectroscopy (XPS). The characterized results of the scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) show the morphology and interior crystal phase structure of CN/MoS2. From the cross-section analysis, the presence of iron oxide nanoparticles lubricating film is synergistic with CN/MoS2 film during the friction process, resulting in its ultra-long wear-life. In particular, the friction mechanism of interlayer sliding friction combined with energy storage friction was analyzed and proposed.

Sign in / Sign up

Export Citation Format

Share Document