scholarly journals The Physical and Chemical Properties of Fine Carbon Particles-Pinewood Resin Blends and Their Possible Utilization

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Aviwe Melapi ◽  
Sampson N. Mamphweli ◽  
David M. Katwire ◽  
Edson L. Meyer

The application of biomass gasification technology is very important in the sense that it helps to relieve the dwindling supply of natural gas from fossil fuels, and the desired product of its gasification process is syngas. This syngas is a mixture of CO and H2; however, by-products such as char, tar, soot, ash, and condensates are also produced. This study, therefore, investigated selected by-products recovered from the gasification process of pinewood chips with specific reference to their potential application in other areas when used as blends. Three samples of the gasification by-products were obtained from a downdraft biomass gasifier system and were characterized in terms of chemical and physical properties. FTIR analysis confirmed similar spectra in all char-resin blends. For fine carbon particles- (soot-) resin blends, almost the same functional groups as observed in char-resin blends appeared. In bomb calorimeter measurements, 70% resin/30% char blends gave highest calorific value, followed by 50% resin/50% soot blends with values of 35.23 MJ/kg and 34.75 MJ/kg consecutively. Provided these by-products meet certain criteria, they could be used in other areas such as varnishes, water purification, and wind turbine blades.

2021 ◽  
Vol 22 (2) ◽  
pp. 10-20
Author(s):  
Amadou Dioulde Donghol Diallo ◽  
Ma’an Fahmi Rashid Alkhatib ◽  
Md Zahangir Alam ◽  
Maizirwan Mel

Empty fruit bunch (EFB), a biomass-based waste, was deemed a potential replacement for fossil fuel. It is renewable and carbon neutral. The efficient management of this potential energy will help to deal with the problem associated with fossil fuels. However, a key parameter for evaluating the quality of raw material (EFB) as a fuel in energy applications is the calorific value (CV). When this CV is low, then its potential utilization as feedstock will be restricted. To tackle this shortcoming, we propose to add municipal solid waste to enhance energetic value. Thus, two major issues will be solved: managing solid residues and contributing an alternative energy source. This study aimed to investigate the possibility of mixing EFB and municipal solid waste (MSW) to make clean energy that is conscious of the environment (climate change) and sustainable development. The selected MSW, comprising of plastics, textiles, foam, and cardboard, were mixed, with EFB at various ratios. Proximate analysis was used to determine moisture content, ash, volatiles, and fixed carbon, whilst elemental analysis, is used to determine CHNS/O for MSW, EFB and their various mixtures. The CV of each element was also measured. The research revealed a significant increase in the calorific value of EFB by mixing it with MSW according to MSW/EFB ratios: 0.25; 0.42; 0.66; 1.00 and 1.50 the corresponding calorific values in (MJ/kg) were 19.77; 21.22; 22.67; 27.04 and 28.47 respectively. While the calorific value of pure EFB was 16.86 MJ/kg, the mixing of EFB with MSW promoted the increase in the CV of EFB to an average of 23.83MJ/kg. Another potential environmental benefit of applying this likely fuel was the low chlorine (0.21 wt. % to 0.95 wt. %) and sulfur concentrations (0.041 wt. % to 0.078 wt.%). This potential fuel could be used as solid refuse fuel (SRF) or refuse-derived fuel (RDF) in a pyrolysis or gasification process with little to no environmental effects. ABSTRAK: Tandan buah kosong (EFB), sisa berasaskan biojisim, adalah berpotensi sebagai pengganti bahan bakar fosil. Ia boleh diperbaharui dan karbon neutral. Pengurusan berkesan pada potensi tenaga ini dapat membantu mengatasi masalah melibatkan bahan bakar fosil. Namun, kunci parameter bagi menilai kualiti bahan mentah (EFB) sebagai bahan bakar dalam aplikasi tenaga adalah nilai kalori (CV). Apabila CV rendah, potensi menjadi stok suapan adalah terhad. Sebagai penyelesaian, kajian ini mencadangkan sisa pepejal bandaran ditambah bagi meningkatkan nilai tenaga. Oleh itu, dua isu besar dapat diselesaikan: mengurus sisa pepejal dan menambah sumber tenaga alternatif. Kajian ini bertujuan mengkaji potensi campuran tandan buah kosong (EFB) dan sisa pepejal bandaran (MSW) bagi menghasilkan tenaga bersih dari sudut persekitaran (perubahan iklim) dan pembangunan lestari. Pemilihan MSW, terdiri daripada plastik, tekstil, gabus dan kadbod, dicampurlan dengan pelbagai nisbah EFB. Analisis proksimat telah digunakan bagi mendapatkan  kandungan kelembapan, abu, ruapan, dan karbon tetap, manakala analisis asas telah digunakan bagi mendapatkan CHNS/O bersama MSW, EFB dan pelbagai campuran lain. Nilai kalori (CV) setiap elemen turut diukur. Dapatan kajian menunjukkan penambahan ketara dalam nilai kalori EFB dengan campuran bersama MSW berdasarkan nisbah MSW/EFB 0.25; 0.42; 0.66; 1.00 dan 1.50 nilai kalori sepadan (MJ/kg) adalah 19.77; 21.22; 22.67; 27.04 dan 28.47 masing-masing. Manakala nilai kalori EFB tulen adalah 16.86 MJ/kg, campuran EFB dan MSW menunjukkan kenaikan CV dengan EFB pada purata 23.83MJ/kg. Antara potensi semula jadi lain adalah dengan mencampurkan bahan bakar ini dengan kalori rendah (0.21 wt. % kepada 0.95 wt. %) dan kepekatan sulfur (0.041 wt. % kepada 0.078 wt.%). Bahan bakar ini berpotensi sebagai bahan bakar pepejal sampah (SRF) atau bahan bakar yang terhasil dari pepejal sampah (RDF) melalui proses pirolisis atau proses gasifikasi yang sedikit atau tiada kesan langsung terhadap persekitaran.


2017 ◽  
Vol 867 ◽  
pp. 254-260 ◽  
Author(s):  
Vivek V. Kumar ◽  
Dilip A. Shah

Due to the rapid depletion of conventional energy resources like fossil fuels and their harmful effects on the environment, there is an urgent need to seek alternative and sustainable energy sources. Wind energy is considered as one of the efficient source of energy which can be converted to useful form of energy like electrical energy. Though the field of wind engineering has developed in the recent era there is still scope for improvement in the effective utilization of energy. Energy efficiency in wind turbine is largely determined by the aerodynamics of the turbine blades and the characteristics of the turbulent fluid flow. The objective of this paper is to have a review on the improvement of Horizontal Axis Wind Turbine (HAWT) blade design by incorporating biomimetics into blades. Biomimetics is the field of science in which we adapt designs from nature to solve modern problems. The morphology of the wing-like flipper of the humpback whale (Megaptera novaeangliae) has potential for aerodynamic applications. Instead of straight leading edges like that of conventional hydrofoils, the humpback whale flipper has a number of sinusoidal rounded bumps, called tubercles arranged periodically along the leading edge. The presence of tubercles modifies the flow over the blade surface, creating vortices between the tubercles. These vortices interact with the flow over the tubercle and accelerate that flow, helping to maintain a partially attached boundary layer. This aerodynamic effect can delay stall to higher angles of attack, increase lift and reduce drag compared to the post-stall condition of conventional airfoils. The modified airfoil is characterized by a superior lift/drag ratio (L/D ratio) due to greater boundary layer attachment from vortices energizing the boundary layer.


Author(s):  
Jihua Gou ◽  
Fei Liang ◽  
Yong Tang ◽  
Kuo-Chi Lin ◽  
Chan Ham ◽  
...  

Energy is an essential ingredient of socio-economic development and economic growth. Renewable energy sources like wind energy is indigenous and can help in reducing the dependency on fossil fuels. It has been estimated that roughly 10 million MW of energy are continuously available in the earth’s wind. Wind energy provides a variable and environmental friendly option and national energy security at a time when decreasing global reserves of fossil fuels threatens the long-term sustainability of global economy. Wind energy is the only power generation technology that can deliver the necessary cuts in CO2 in the critical period up to 2020, when greenhouse cases must peak and begin to decline to avoid dangerous climate change. Over the past ten years, global wind power capacity has continued to grow at an average cumulative rate of over 30%, and 2008 was another record year with more than 27 GW of new installations, bringing the total up to over 120 GW.


10.14311/1572 ◽  
2012 ◽  
Vol 52 (4) ◽  
Author(s):  
Marek Baláš ◽  
Martin Lisý ◽  
Ota Štelcl

Gasification is a technology that uses fuel to produce power and heat. This technology is also suitable for biomass conversion. Biomass is a renewable energy source that is being developed to diversify the energy mix, so that the Czech Republic can reduce its dependence on fossil fuels and on raw materials for energy imported from abroad. During gasification, biomass is converted into a gas that can then be burned in a gas burner, with all the advantages of gas combustion. Alternatively, it can be used in internal combustion engines. The main task during gasification is to achieve maximum purity and maximum calorific value of the gas. The main factors are the type of gasifier, the gasification medium, biomass quality and, last but not least, the gasification mode itself. This paper describes experiments that investigate the effect of temperature and pressure on gas composition and low calorific value. The experiments were performed in an atmospheric gasifier in the laboratories of the Energy Institute atthe Faculty of Mechanical Engineering, Brno University of Technology.


2013 ◽  
Vol 724-725 ◽  
pp. 405-408 ◽  
Author(s):  
Ashutosh Kumar Rai ◽  
Bhupendra Singh Chauhan ◽  
Naveen Kumar ◽  
Haeng Muk Cho ◽  
Amrita Pandey

To address the twin problems of fast depletion of fossil fuels and environmental degradation, there is an urgent need to reduce dependence on petroleum derived fuels for better economy and environment. Adaptation of bio-origin alternative fuels can address both these issues. Liquid bio-origin fuels are renewable fuels coming from biological sources and have proved to be a good substitute for petroleum derived oil and environmentally-sustainable solution. To sustain agricultural and agro-engineering needs blends of linseed oil with diesel is a better solution. Present study shows the comparative assessment of physical and chemical analysis of Linseed oil and its blends asa potential fuel for internal combustion diesel engine. To understand diesel engines fuel properties of vegetable oils and comparable physico-chemical properties such as calorific value, kinematic viscosity and density were measured for different fuel blends to predict its suitability as replacement or extender of mineral diesel. The fatty acid composition was measured by using a chromatograph. From the results, it is clear that the physico-chemical properties of linseed oil lies in close resemblance with lower calorific value high viscosity. When blended in the v/v ratio of 5%, 10%, 15%, 20% its calorific value decreases with increase of percentage blends, whereas viscosity and density increases with increase of blend ratio. Linseed oil hence can be recommended as a potential fuel for Diesel engine in neat or blended form without any major change in present design, in the hour of energy need.


2009 ◽  
Vol 129 (5) ◽  
pp. 689-695
Author(s):  
Masayuki Minowa ◽  
Shinichi Sumi ◽  
Masayasu Minami ◽  
Kenji Horii

Sign in / Sign up

Export Citation Format

Share Document