scholarly journals Corrosion Inhibition of Carbon Steel in 0.5 M H2SO4 by Phtalocyanine Blue

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
J. C. Valle-Quitana ◽  
G. F. Dominguez-Patiño ◽  
J. G. Gonzalez-Rodriguez
Keyword(s):  
Sulfuric Acid ◽  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Corrosion Process ◽  
Blue Dye ◽  
Protective Film ◽  
Film Properties ◽  
Adsorption Desorption

Phthalocyanine blue dye has been investigated as a carbon steel corrosion inhibitor in 0.5 M sulfuric acid by using polarization curves, electrochemical impedance spectroscopy, and gravimetric tests. Dye concentrations included 0, 100, 200, 400, 600, 800, and 1000 ppm, whereas testing temperatures were 25, 40, and 60°C. Results indicated that phtalocyanine blue is a good corrosion inhibitor with its efficiency increasing with the concentration up to 40°C, but it increases at 60°C. Inhibitor improves the passive film properties and it forms an adherent, compact, protective film, acting, therefore, as an anodic-type inhibitor. At 25 and 40°C the corrosion process was under charge transfer, whereas at 60°C the adsorption/desorption of some species from the metal surface controlled the corrosion process.

Inhibitory Action of Persian Pyrifoliabark Extract against Corrosion of SAE 1020 Carbon Steel in Sodium Chloride Medium

2020 ◽  
Vol 1012 ◽  
pp. 390-394
Author(s):  
C. Vieira ◽  
D. Borges ◽  
D.C.S. Oliszeski ◽  
L.F.G. Larsson ◽  
E.P. Banczek
Keyword(s):  
Sodium Chloride ◽  
Carbon Steel ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Steel Corrosion ◽  
Industrial Applications ◽  
Protective Film ◽  
Chloride Medium ◽  
Simple Extraction ◽  
Extraction Processes

Carbon steel is one of the most commonly used alloys in industrial applications due to its physicochemical properties and low cost. However, the use of this metal material may become limited due to its vulnerability to corrosion. Thus, it is necessary to use methods that inhibit corrosion. Organic compounds with heteroatoms possess the characteristic of inhibiting corrosion by forming a protective film. The corrosion protection of SAE 1020 carbon steel, promoted by the aqueous extract of Persea pyrifolia (PP) bark, was evaluated in this work at extract concentrations of 5% and 10% v/v, in order to replace an inhibitor of synthetic origin with an ecologically benign inhibitor. Plant extracts are generally inexpensive and can be obtained through simple extraction processes. The objective of this work was to study the use of PP peel extract as a carbon steel corrosion inhibitor (SAE 1020). The electrochemical response was determined by measurements including electrochemical impedance spectroscopy (EIS) and anodic potentiodynamic polarization (PPA) in a 0.5 M sodium chloride medium. The samples were characterized by optical microscopy to evaluate the type of corrosion.

scholarly journals The Inhibition Effect of Sodium Glutarate towards Carbon Steel Corrosion in Neutral Aqueous Solutions

2016 ◽  
Vol 2016 ◽  
pp. 1-12
Author(s):  
G. Chan-Rosado ◽  
M. A. Pech-Canul
Keyword(s):  
Carbon Steel ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Inhibition Mechanism ◽  
Protective Film ◽  
Inhibition Effect ◽  
Low Concentrations ◽  
Defect Sites ◽  
Chemical Passivation ◽  
High Concentrations

The inhibition effect of sodium glutarate towards corrosion of carbon steel in neutral 0.02 M NaCl solution was investigated with potentiodynamic polarization and electrochemical impedance measurements. Results of electrochemical measurements revealed a poor inhibitive action for low concentrations (1 mM and 5 mM) and a significant improvement in efficiency for concentrations of 32 mM or higher. The protective film exhibited excellent stability in the temperature range 22°C–55°C. Full chemical passivation was accomplished and analysis of the impedance spectra for the high concentrations of glutarate was consistent with the inhibition mechanism which assumes that the carboxylates support the passivation of carbon steel in aerated solutions by plugging the defect sites and that the passivation process is enhanced by adsorption of the carboxylates on the oxide-covered surface. Such mechanism was confirmed by the XPS analysis.

Oil-in-water emulsion of a heterocyclic adduct as a novel inhibitor of API X52 steel corrosion in acidic solution

2018 ◽  
Vol 36 (6) ◽  
pp. 575-588 ◽  
Author(s):  
Ahmed A. Farag
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Effect Of Temperature ◽  
Tween 20 ◽  
Water Emulsion ◽  
Carbon Steel Surface ◽  
Oil In Water Emulsion ◽  
Surface Morphologies

AbstractIn this study, an addition reaction occurred between epoxidized soybean oil and 4-(dimethylamino)benzenethiol to produce a thiol adduct (TA). The produced TA had been emulsified using a nonionic emulsifier blend (Tween 20, Span 20, and Span 80) to be a water-miscible emulsified thiol adduct (ETA). The ETA emulsion was investigated as a corrosion inhibitor for API X52 carbon steel in 1 m HCl using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. The surface morphologies of the carbon steel were characterized by scanning electron microscopy and energy dispersive X-ray. The effect of temperature was investigated. It was found that the emulsified adduct behaves as an excellent corrosion inhibitor with high inhibition efficiency of 94.7% with 0.005 m concentration. The polarization data indicate that the emulsified adduct acted as a mixed-type inhibitor. The adsorption of the emulsified adduct on the carbon steel surface has been found to follow the Langmuir isotherm.

scholarly journals Synthesis of ZnO-NPs Using a Convolvulus arvensis Leaf Extract and Proving Its Efficiency as an Inhibitor of Carbon Steel Corrosion

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 890
Author(s):  
Ghadah M. Al-Senani
Keyword(s):  
Carbon Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Protective Film ◽  
Convolvulus Arvensis ◽  
Zno Nps ◽  
Transfer Resistance ◽  
Carbon Steel Surface ◽  
Vis Spectroscopy

This paper studies the use of zinc oxide nanoparticles (ZnO-NPs) synthesized using an extract of Convolvulus arvensis leaf and expired ZnCl2, as efficient inhibitors of carbon steel corrosion in a 1 M HCl solution. The synthesized ZnO-NPs were characterized by Fourier-transform infrared (FTIR) and UV-Vis spectroscopy analysis. The corrosion inhibition of carbon steel in 1 M HCl was also investigated through potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and the determination of weight loss. The results show that the efficiency of the prevention increased when the concentration of ZnO-NPs was increased to 91%, and that the inhibition efficiency was still high (more than 89%) despite decreasing at high temperatures, acting as a mixed-type inhibitor. A sample of carbon steel with a protective layer of inhibitor on top was observed during immersion in 1 M HCl for 20 h; an increase in the charge transfer resistance (Rct) and stability of the inhibitor could be observed after 6 h. Adsorption isotherm models demonstrated that the inhibitor adsorption mechanism on the carbon steel surface followed Langmuir rather than Freundlich and Temkin behaviors. The thermodynamic parameters showed that the adsorption process is one of mixed, spontaneous, and exothermic adsorption. The results illustrate that the ZnO-NPs were a strong inhibitor of carbon steel corrosion in acid medium. The results of scanning electron microscopy (SEM) images showed that the ZnO-NPs formed a good protective film on the carbon steel surface.

scholarly journals Synthesis of ZnO-NPs Using Convolvulus Leaf Extract and Proving Its Efficiency as an Inhibitor for Carbon Steel Corrosion in 1M HCl

2020 ◽  
Author(s):  
Ghadah Al-Senani
Keyword(s):  
Carbon Steel ◽  
Steel Surface ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Isotherm Models ◽  
Protective Film ◽  
Zno Nps ◽  
Strong Inhibitor ◽  
Transfer Resistance ◽  
Carbon Steel Surface

This paper studies the use of zinc oxide nanoparticles (ZnO-NPs) synthesized using an extract of convolvulus leaves and expired ZnCl2, as an efficient inhibitor for carbon steel corrosion in 1M HCl solution. ZnO-NPs are characterized by Fourier-transform infrared spectrophotometer (FTIR) and UV–Vis analysis. The technique of weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) has also been used to investigate the prevention of carbon steel corrosion in 1M HCl. The results showed that the efficiency of restraint increased when the concentration of ZnO-NPs was raised to 91% and that the inhibition efficiency is still high despite its decrease at high temperature, and it acts as a mixed-type inhibitor A sample of carbon steel with the protective inhibitor layer on top was immersed for 20 hours and observed; an increase in the charge transfer resistance (Rct) and stability of the inhibitor was noticed after 6 hours. Adsorption isotherm models demonstrated that the inhibitor adsorption mechanism on the carbon steel surface followed Langmuir, more than Freundlich and Temkin, behavior. The thermodynamic parameters showed that the adsorption process is a mixed adsorption, spontaneous, and exothermic. The results illustrated that the acid medium was a strong inhibitor of carbon steel corrosion. Scanning electron microscope (SEM) showed that the ZnO-NPs formed a good protective film on the carbon steel surface.

The inhibitive properties of Nopal slime on the corrosion of steel in chloride-contaminated mortar

2015 ◽  
Vol 63 (1) ◽  
pp. 65-71 ◽  
Author(s):  
Wilfrido Martinez-Molina ◽  
Andres Torres-Acosta ◽  
Rosalba Hernández-Leos ◽  
Elia Alonso-Guzman ◽  
Itzel Mendoza-Pérez ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Electrochemical Impedance ◽  
Experimental Period ◽  
Experimental Program ◽  
Content Type ◽  
Industry Applications ◽  
Cactus Mucilage ◽  
Electrochemical Monitoring ◽  
Chloride Contaminated

Purpose – The purpose of this paper is to determine if a type of cactus mucilage, Opuntia ficus-indica (OFI), may act as a corrosion inhibitor for carbon steel in cement-based materials (mortar) exposed to chloride-laden environment. Design/methodology/approach – Mortar prisms, reinforced with carbon steel rods, were immersed in sodium chloride (NaCl) solution for five wet – dry cycles. The experimentation included electrochemical monitoring (corrosion potential, Ecorr, and polarization resistance, Rp) of carbon steel during the time of exposure until corrosion-induced cracking appeared at the mortar surface. Crack survey on the mortar prisms was performed. Carbon steel rods were retrieved from the mortar after crack survey and steel mass loss at the end of the experimental period was estimated. A comparison between the different mixtures was also performed. Findings – OFI mucilage did perform as a corrosion inhibitor of steel in chloride contaminated mortar. Research limitations/implications – The experimental program needs to be corroborated in concrete specimens with typical dimensions. The surface oxide/hydroxide formation of the carbon steel in contact with the OFI mucilage is still unknown; thus, electrochemical impedance spectroscopy (EIS) and X-ray diffraction (XRD) analyses are needed. Practical implications – OFI mucilage is a suitable natural product that can be used to increase durability of concrete structures not only in countries where OFI cactus is produced, but also in many other countries where this plant is considered a plague. Originality/value – The new information obtained from this paper is the innovative use of a by-product of this cactus plant for construction industry applications.

scholarly journals Practical and Theoretical Study on the Inhibitory Influences of New Azomethine Derivatives Containing an 8-Hydroxyquinoline Moiety for the Corrosion of Carbon Steel in 1 M HCl

2018 ◽  
Vol 34 (6) ◽  
pp. 3016-3029 ◽  
Author(s):  
A. El-Yaktini ◽  
A. Lachiri ◽  
M. El-Faydy ◽  
F. Benhiba ◽  
H. Zarrok ◽  
...  
Keyword(s):  
Carbon Steel ◽  
Density Functional ◽  
Electrochemical Impedance ◽  
Density Functional Theory Method ◽  
Steel Corrosion ◽  
Experimental Results ◽  
Chemical Parameters ◽  
Functional Theory ◽  
The Density Functional Theory ◽  
Inhibition Ability

The inhibition ability of a new Azomethine derivatives containing the 8-hydroxyquinoline (BDHQ and MDHQ) towards carbon steel corrosion in HCl solution was studied at various concentrations and temperatures using weight loss, polarization curves and electrochemical impedance spectroscopy (EIS) methods. The experimental results reveal that BDHQ and MDHQ are efficient mixed type corrosion inhibitors, and their inhibition efficiencies increase with increasing concentration. The adsorption of these inhibitors on mild steel surface obeys Langmuir isotherm. Quantum chemical parameters are calculated using the Density Functional Theory method (DFT) and Monte Carlo simulations. Correlation between theoretical and experimental results is discussed.

scholarly journals Green Approach to Corrosion Inhibition of Carbon Steel by Fucus spiralis extract in 1 M HCl Medium

2021 ◽  
Vol 12 (5) ◽  
pp. 7075-7091
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitor ◽  
Surface Characterization ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Adsorption Model ◽  
Corrosion Properties ◽  
Uv Visible ◽  
Fucus Spiralis ◽  
Hcl Medium

The extract of Fucus spiralis (FS) was tested as a corrosion inhibitor of carbon steel in a 1M HCl medium. The anti-corrosion properties were analyzed by gravimetric and electrochemical techniques such as potentiodynamic polarization (PDP) and electrochemical impedance spectroscopy (EIS). The surface characterization of carbon steel submerged in the optimal solution was carried out using UV-Visible, UV-Vis-NIR, and Optical microscopy analyses. Electrochemical and gravimetric results demonstrated that inhibitory efficiencies increase with increasing inhibitor concentration and the efficiency reaches 87% at a concentration of 0.5 g/L. According to Tafel extrapolated polarisation measurements, the FS also worked as a mixed-type corrosion inhibitor and changed the mechanism of anodic reactions. EIS analysis showed that a depressed capacitive loop dominates the Nyquist plot of impedance and enhances the polarization resistance (Rp) to 161.9 Ω cm2 with a reduction of the double layer capacity (Cdl) of carbon steel to 61.8 μF/cm2. This protection is assured by an adsorption mechanism based on the isothermal Langmuir adsorption model, which positively affects the thermodynamic parameters. UV-Visible, UV-Vis-NIR analyses exhibited that inhibitor decreases the iron oxides like hematite, Magnetite, and Goethite, Maghemite, Lepidocrocite, δ-FeOOH of the metal surface and delays the dissolution of the bare metal of iron to the ferrous ions, notably that optical morphology showed that FS extract decreases the aggressivity of HCl.

Phenylcoumarin Glucoside as a Natural Inhibitor in the Protection of Low Carbon Steel Against Corrosion

MRS Advances ◽  
2017 ◽  
Vol 2 (62) ◽  
pp. 3909-3915
Author(s):  
Héctor M. Barbosa Cásarez ◽  
Araceli Espinoza Vázquez ◽  
Francisco J. Rodríguez-Gomez
Keyword(s):  
Carbon Steel ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Electrochemical Techniques ◽  
Low Carbon Steel ◽  
Steel Corrosion ◽  
Low Carbon ◽  
Low Concentrations ◽  
Natural Inhibitor ◽  
Polarization Studies

AbstractPhenylcoumarin glucoside (4-PC) is a compound extracted from the plant Hintona latiflora and was studied as inhibitor for AISI 1018 steel corrosion in 3% NaCl solution using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques, which may find application as eco-friendly corrosion inhibitors. The 4-PC provides inhibitor properties that protect AISI 1018 low carbon steel against corrosion at low concentrations (5 ppm) obtained by EIS. Polarization studies showed that the inhibitor was of mixed type. The inhibition efficiency by the two electrochemical techniques shows similar results. The inhibitor adsorption was demonstrated to be a combined process (physisorption and chemisorption) according to the Langmuir isotherm.

Sign in / Sign up

Export Citation Format

Share Document