scholarly journals Extractive Spectrophotometric Determination of Tenofovir Disoproxil Fumarate Using Acidic Triphenylmethane Dyes

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
K. Susmitha ◽  
M. Thirumalachary ◽  
T. Charan Singh ◽  
G. Venkateshwarlu
Keyword(s):  
Tenofovir Disoproxil Fumarate ◽  
Pharmaceutical Formulations ◽  
Transcriptase Inhibitor ◽  
Bromothymol Blue ◽  
Bromophenol Blue ◽  
Bromocresol Purple ◽  
Triphenylmethane Dyes ◽  
Spectrophotometric Methods ◽  
Nucleotide Reverse Transcriptase Inhibitor

Tenofovir disoproxil fumarate is a nucleotide reverse transcriptase inhibitor that has activity against the hepatitis B and HIV viruses. Three simple and sensitive extractive spectrophotometric methods have been described for the assay of tenofovir disoproxil fumarate either in pure form or in pharmaceutical formulations. The developed methods involve formation of colored chloroform extractable ion-pair complexes of the drugs with triphenylmethane dyes, namely, bromothymol blue (BTB), bromophenol blue (BPB), and bromocresol purple (BCP) in acidic medium. The extracted complexes showed absorbance maxima between 410 and 415 nm. Beer’s law is obeyed in the concentration ranges 1.5–25, 1.0–25, and 1.25–25 μg mL−1 with BTB, BPB, and BCP, respectively. The effectc of concentration of dye, pH, and interference of excipients have been studied and optimized. The limits of detection and quantification have been determined. All three methods are validated as per the guidelines of ICH. The methods have been applied to the determination of drug in commercial tablets and results of analysis were validated statistically through recovery studies.

scholarly journals Spectrophotometric Determination of Gemifloxacin Mesylate, Moxifloxacin Hydrochloride, and Enrofloxacin in Pharmaceutical Formulations Using Acid Dyes

2014 ◽  
Vol 2014 ◽  
pp. 1-16 ◽  
Author(s):  
Ayman A. Gouda ◽  
Alaa S. Amin ◽  
Ragaa El-Sheikh ◽  
Amira G. Yousef
Keyword(s):  
Pharmaceutical Formulations ◽  
Bromothymol Blue ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Bromocresol Purple ◽  
Acid Dyes ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Comparison Of The Results

Simple, rapid, and extractive spectrophotometric methods were developed for the determination of some fluoroquinolones antibiotics: gemifloxacin mesylate (GMF), moxifloxacin hydrochloride (MXF), and enrofloxacin (ENF) in pure forms and pharmaceutical formulations. These methods are based on the formation of ion-pair complexes between the basic drugs and acid dyes, namely, bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), bromothymol blue (BTB), and methyl orange (MO) in acidic buffer solutions. The formed complexes were extracted with chloroform and measured at 420, 408, 416, 415, and 422 nm for BCG, BCP, BPB, BTB, and MO, respectively, for GMF; at 410, 415, 416, and 420 nm for BCP, BTB, BPB, and MO, respectively, for MXF; and at 419 and 414 nm for BCG and BTB, respectively, in case of ENF. The analytical parameters and their effects are investigated. Beer’s law was obeyed in the ranges 1.0–30, 1.0–20, and 2.0–24 μg mL−1for GMF, MXF, and ENF, respectively. The proposed methods have been applied successfully for the analysis of the studied drugs in pure forms and pharmaceutical formulations. Statistical comparison of the results with the reference methods showed excellent agreement and indicated no significant difference in accuracy and precision.

scholarly journals Validated Extractive Spectrophotometric Method for Determination of Domperidone in Pharmaceutical Formulations

2015 ◽  
Vol 17 (1) ◽  
pp. 25-31
Author(s):  
Jasmin Shah ◽  
M Rasul Jan ◽  
Muhammad Tariq Shah
Keyword(s):  
Acidic Medium ◽  
Pharmaceutical Formulations ◽  
Pharmaceutical Journal ◽  
Bromothymol Blue ◽  
Hplc Method ◽  
Ion Pair ◽  
Bromophenol Blue ◽  
Spectrophotometric Methods ◽  
New Methods

Simple, precise and sensitive extractive spectrophotometric methods have been developed for the determination of domperidone in pharmaceutical formulations. The new methods involve the formation of colored extractable ion pair complexes of the drug with bromothymol blue (BTB) and bromophenol blue (BPB) in acidic medium. The effects of various parameters like pH, reagent concentration and shaking time were studied. The extracted complexes of domperidone showed maximum absorbance at 410 nm with BTB and at 415 nm with BPB dye. The stiochiometry of the reaction between domperidone, BTB and BPB was found to be 1: 4. Domperidone was found to obey Beer’s law in the concentration ranges of 0.6-35 ?g/ml, 1-30 ?g/ml with BTB and BPB, respectively. The method has been applied successfully for the determination of domperidone in commercial tablets and suspension samples. The results obtained by the proposed methods were validated statistically and compared with the official HPLC method. DOI: http://dx.doi.org/10.3329/bpj.v17i1.22310 Bangladesh Pharmaceutical Journal 17(1): 25-31, 2014

scholarly journals Spectrophotometric Determination of Certain Antidepressants in Pharmaceutical Preparations

2006 ◽  
Vol 89 (4) ◽  
pp. 966-971 ◽  
Author(s):  
ArmaĞan Önal ◽  
Ş. Evrim Kepeki ◽  
S MÜge Çetin ◽  
Sidika ErtÜrk
Keyword(s):  
High Performance ◽  
Pharmaceutical Preparations ◽  
Bromothymol Blue ◽  
Molar Absorptivity ◽  
Ion Pair ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Spectrophotometric Methods ◽  
Drug Substances

Abstract Simple and reproducible spectrophotometric methods have been developed for determination of sertraline, fluoxetine, and venlafaxine in pharmaceutical preparations. The methods are based on the reactions between the studied drug substances and ion-pair agents (bromothymol blue, bromocresol green, or bromophenol blue) to produce yellow-colored ion-pair complexes in acidic buffers. After extracting in chloroform, the ion-pair complexes are spectrophotometrically determined at the optimum wavelength. Optimizations of the reaction conditions were carried out. Beer's law was obeyed within the concentration range from 1 to 15 μg/mL. The molar absorptivity, Sandell sensitivity, and detection and quantification limits were also determined. The developed methods were applied successfully for the determination of these drugs in some available commercial preparations. The results were compared statistically with those obtained from reported high-performance liquid chromatography methods.

scholarly journals Determination of Fluoroquinolones in Pharmaceutical Formulations by Extractive Spectrophotometric Methods Using Ion-Pair Complex Formation with Bromothymol Blue

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Trung Dung Nguyen ◽  
Hoc Bau Le ◽  
Thi Oanh Dong ◽  
Tien Duc Pham
Keyword(s):  
Spectrophotometric Method ◽  
High Performance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Bromothymol Blue ◽  
Pharmaceutical Products ◽  
Ion Pair ◽  
Spectrophotometric Methods ◽  
Method Of Continuous Variation

In this paper, we reported a new, simple, accurate, and precise extractive spectrophotometric method for the determination of fluoroquinolones (FQs) including ciprofloxacin (CFX), levofloxacin (LFX), and ofloxacin (OFX) in pharmaceutical formulations. The proposed method is based on the ion-pair formation complexes between FQs and an anionic dye, bromothymol blue (BTB), in acidic medium. The yellow-colored complexes which were extracted into chloroform were measured at the wavelengths of 420, 415, and 418 nm for CFX, LFX, and OFX, respectively. Some effective conditions such as pH, dye concentration, shaking time, and organic solvents were also systematically studied. Very good limit of detection (LOD) of 0.084 µg/mL, 0.101 µg/mL, and 0.105 µg/mL were found for CFX, LFX, and OFX, respectively. The stoichiometry of the complexes formed between FQs and BTB determined by Job’s method of continuous variation was 1 : 1. No interference was observed from common excipients occurred in pharmaceutical formulations. The proposed method has been successfully applied to determine the FQs in some pharmaceutical products. A good agreement between extractive spectrophotometric method with high-performance liquid chromatography mass spectrometry (HPLC-MS) for the determination of FQs in some real samples demonstrates that the proposed method is suitable to quantify FQs in pharmaceutical formulations.

scholarly journals Title DEVELOPMENT AND VALIDATION OF SPECTROPHOTOMETRIC METHODS FOR DETERMINATION OF LEUKOTRIENE RECEPTOR ANTAGONIST MONTELUKAST SODIUM IN BULK AND PHARMACEUTICAL FORMULATIONS

2020 ◽  
pp. 86-92
Author(s):  
RAGAA EL SHEIKH ◽  
WAFAA S HASSAN ◽  
MARWA M EL-GABRY ◽  
AYMAN A GOUDA ◽  
SALEH S IDRIS ◽  
...  
Keyword(s):  
Methyl Orange ◽  
Receptor Antagonist ◽  
Pharmaceutical Formulations ◽  
Ion Pair ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Leukotriene Receptor Antagonist ◽  
Spectrophotometric Methods ◽  
Leukotriene Receptor

Objective: Simple, sensitive, precise, reproducible, and validated visible spectrophotometric methods have been developed for the determination of leukotriene receptor antagonist drug, namely, montelukast (MNT) sodium in bulk and pharmaceutical preparations. Methods: Three spectrophotometric methods are based on the formation of yellow-colored ion-pair complexes between MNT sodium and three dyes, bromocresol green, bromophenol blue, and methyl orange with absorption maxima at 420, 416, and 426 nm, respectively. Results: The stoichiometric ratio of the formed ion-pair complexes was found to be 1:1 (drug:reagent) for all methods, as deduced by Job’s method of continuous variation. Several parameters such as pH, buffer type and volume, reagent volume, sequence of addition, and effect of extracting solvent were optimized to achieve high sensitivity, stability, low blank reading, and reproducible results. Under the optimum conditions, linear relationships with good correlation coefficients (0.9993–0.9999) were found over the concentration ranges of 1.0–10, 1.0–12, and 1.0–16 μg/mL with a limit of detection of 0.30, 0.29, and 0.27 μg/mL for bromocresol green, bromophenol blue, and methyl orange methods, respectively. Conclusion: The proposed methods were validated in accordance with ICH guidelines and successfully applied to the analysis of MNT sodium in pharmaceutical formulations. Statistical comparison of the results obtained by applying the proposed methods with those of the reference method revealed good agreement and proved that there was no significant difference in the accuracy and precision between the results. 

Spectrophotometric quantification of fluoxetine hydrochloride: Application to quality control and quality assurance processes

2010 ◽  
Vol 64 (3) ◽  
Author(s):  
Alaa Amin ◽  
Ibrahim Ahmed ◽  
Hassan Dessouki ◽  
Hassan Mohamed
Keyword(s):  
Biological Fluids ◽  
Standard Addition ◽  
Bromothymol Blue ◽  
Molar Absorptivity ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Bromocresol Purple ◽  
Spectrophotometric Methods ◽  
Fluoxetine Hydrochloride ◽  
Relative Standard

AbstractSimple and rapid spectrophotometric methods have been developed for the microdetermination of fluoxetine HCl. The proposed methods are based on the formation of ion-pair complexes between fluoxetine and bromophenol blue (BPB), bromothymol blue (BTB), bromocresol green (BCG), and bromocresol purple (BCP) which can be measured at optimum λmax. Optimization of reaction conditions was investigated. Beerșs law was obeyed in the concentration ranges of 0.5–8.0 μg mL−1, whereas optimum concentration as adopted from the Ringbom plots was 0.7–7.7 μg mL−1. The molar absorptivity, Sandell sensitivity, and detection limit were also calculated. The most optimal and sensitive method was developed using BCG. The correlation coefficient was 0.9988 (n = 6) with a relative standard deviation of 1.25, for six determinations of 4.0 μg mL−1. The proposed methods were successfully applied to the determination of fluoxetine hydrochloride in its dosage forms and in biological fluids (spiked plasma sample) using the standard addition technique.

scholarly journals Spectrophotometric Determination of Bromhexine HCl in Pure and Pharmaceutical Forms

2013 ◽  
Vol 2013 ◽  
pp. 1-7
Author(s):  
K. Susmitha ◽  
M. Thirumalachary ◽  
G. Venkateshwarlu
Keyword(s):  
Fixed Time ◽  
Bromothymol Blue ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision ◽  
Charge Transfer Complexation ◽  
Job's Method ◽  
Kinetics Of

Five spectrophotometric methods for determination of bromhexine HCl have been developed, validated, and applied for the assay of the drug in pharmaceuticals. Methods A, B, and C are based on ion-pair complexation of drug, in acidic buffers, with triphenylmethane dyes, namely, bromothymol blue (BTB), bromophenol blue (BPB), and bromocresol green (BCG). The complexes are extracted into chloroform, and absorbance is measured at around 415 nm as function of concentration of the drug. The stoichiometry of the complex is found to be 1 : 1 in each case. Method D depends upon charge-transfer complexation of neutralized drug with iodine which produces iodide ion whose absorbance at 366 nm is measured as function of concentration of the drug. This complex too has 1 : 1 composition as determined by Job’s method. Method E is developed on the basis of oxidation of the drug with alkaline KMnO4 which generates green-colored manganate ion with 610 nm. As the intensity of green color increased with increasing time kinetics of the reaction is followed, and calibration curves are constructed by using initial rate and fixed time methods. Excellent recovery studies with high accuracy and precision indicate that the methods can be successfully used in industries for the assay of drug in pure form and pharmaceuticals.

Sign in / Sign up

Export Citation Format

Share Document