scholarly journals A New Trend in Recording Subgingival Tissue around an Implant While Making a Direct Abutment Impression

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Suryakant C. Deogade ◽  
Sneha S. Mantri ◽  
Gunjan Dube ◽  
Radhika Shrivastava ◽  
Syed Noorani

A successful implant-supported restoration must provide adequate function and esthetics. Osseointegrated implants have given an alternative choice for patients who have lost their teeth. Most commonly encountered problems while doing a transfer from patient to the master cast in restoring implant-supported crowns are an uneven distribution of occlusal loads and undue torquing forces on the various elements of implant. This is caused due to poor fit of frameworks connected to implant, which further leads to marginal bone loss, loosening of screws, fatigue fracture of implant components, and ultimately implant failure. This paper presents a simplified and easy solution to overcome such problems by introducing an innovative gingival retraction system for restoring implant-supported crowns to achieve superior and predictable long-term outcomes.

2021 ◽  
Vol 10 (7) ◽  
pp. 1360
Author(s):  
Won-Bae Park ◽  
Ji-Young Han ◽  
Kyung Lhi Kang

Maxillary sinus floor augmentation (MSFA) is widely used and considered a predictable procedure for implant placement. However, the influence of MSFA on implant survival and marginal bone loss (MBL) is still inconclusive. The purpose of this retrospective observational study is to evaluate the long-term genuine influence of MSFA on the survival and MBL of implants by comparing those with and without MSFA only in maxillary molars within the same patients. Thirty-eight patients (28 male and 10 female), with a total of 119 implants, received implants with and without MSFA, and were followed up for 5.8 to 22 years. Patient- and implant-related factors were assessed with a frailty model for implant survival and with generalized estimation equations (GEE) for MBL around the implant. No variables showed a statistical significance for implant failure in the frailty model. In GEE analysis for MBL, MSFA did not show any statistical significance. In conclusion, MSFA demonstrated no significant influence on implant failure and MBL in posterior maxilla in this study.


2021 ◽  
Author(s):  
Wen Mo Gao ◽  
Wei Geng ◽  
Chen Chen Luo

Abstract Background: Restoration with locking-taper implants is a widely used methodology. However, relatively few have examined conical connection systems like locking-taper implant systems. This study provides a retrospective study of locking-taper fixed restorations, mainly focused on prosthetic complications.Methods: All patients who underwent conical connected implants from 2008–2010 were examined. Preparation of the implant sites was performed according to the standard procedures for the Bicon system. The bone healing took over 6 months, and the prosthetic procedure was initiated thereafter. Integrated abutment crowns or gold porcelain crowns were used, and the prosthesis type was a single crown or a fixed dental prosthesis. Once the crown was in place, its occlusion was thoroughly checked and adjusted, and then the crown was glazed or finely polished. The Kaplan-Meier method was used to calculate the cumulative complication-free rates for 5 and 10 years. Additionally, a Cox regression model was used to identify the factors that independently influenced the results. Implant survival and marginal bone loss were also investigated.Results: A total of 392 patients who underwent 541 implants and 434 locking taper implant-based restorations from 2008–2010 were examined. The overall 5-year cumulative complication-free rate was 83.34%. The most common prosthetic complication was veneer chipping, with a frequency of 67.53%. According to the Cox regression model, the complication-free rate of integrated abutment crowns was significantly higher than gold porcelain crowns, molar regions was significantly higher than premolar regions, and females was significantly higher than males. Only three implant failures happened, and a mean marginal bone loss at 1- year, 5-year and 10- year was 0.25mm(95%CI:±0.12), 0.40mm (95%CI:±0.03)and 0.51mm(95%CI:±0.05), respectively.Conclusion: Veneer chipping was the most common complication with locking-taper implants supported fixed restorations. According to the result of Cox regression model, gold porcelain crowns are a protective factor relative to integrated abutment crowns, male sex is a protective factor relative to female sex, and premolar prosthetics are a protective factor relative to molar prosthetics. The long-term clinical effect of locking-taper implant is stable, and the implant success rate can meet the clinical needs. The bone tissue level around the implant can maintain long-term stability.


2019 ◽  
Vol 13 (01) ◽  
pp. 047-052 ◽  
Author(s):  
Eser Elemek ◽  
Artun Urgancioglu ◽  
Janberd Dincer ◽  
Altug Cilingir

Abstract Objective The use of dental implants with different types of surface roughness and implant-abutment interface has brought about a situation of marginal bone loss. Therefore, the aim of this study was to analyze and compare marginal bone levels of different types of osseointegrated dental implants with platform switch (Group A: Ankylos, Mannheim, Germany) and platform match (Group B: Dentsply Xive, Mannheim, Germany, and Group C: MIS Implant Technologies, Karmiel, Israel). Materials and Methods One hundred and seven patients (52 men and 55 women) with a mean age of 54.79 (standard deviation ± 12.35) years and a total of 321 dental implants (Group A, n = 198; Group B, n = 58; and Group C, n = 65) placed in a private practice between April 2006 and May 2015 were retrospectively analyzed. In addition to demographic information and implant characteristics, marginal bone levels were evaluated by Image J (Wayne Rasband, National Institute of Health, Maryland) program. Results The mean age of all patients was 54.79 ± 12.35 years, and 51.5% of them were women. Implants supporting fixed bridge were most commonly used in all groups (65%), whereas only 20% were restored with a single crown and 15% with overdentures. In total, 47.5% of all implants showed no marginal bone loss. Mean bone loss in Group A was significantly lower (0.81 ± 1.60 mm) as compared to Group B (1.58 ± 1.59 mm) and Group C (1.18 ± 1.36) (p < 0.005). Conclusion Among different types of dental implants, platform switch seems to preserve marginal bone levels and increase the long-term success of dental implants.


2019 ◽  
Vol 34 (4) ◽  
pp. 992-998 ◽  
Author(s):  
Adolfo Di Fiore ◽  
Paolo Vigolo ◽  
Stefano Sivolella ◽  
Francesco Cavallin ◽  
Joannis Katsoulis ◽  
...  

2016 ◽  
Vol 87 (1) ◽  
pp. 14-20 ◽  
Author(s):  
José R. Corcuera-Flores ◽  
Ana M. Alonso-Domínguez ◽  
M. Ángeles Serrera-Figallo ◽  
Daniel Torres-Lagares ◽  
Lizett Castellanos-Cosano ◽  
...  

Author(s):  
Cristina Ibañez ◽  
Andrés Catena ◽  
Pablo Galindo-Moreno ◽  
Blas Noguerol ◽  
Antonio Magán-Fernández ◽  
...  

2009 ◽  
Vol 11 (1) ◽  
pp. 11-23 ◽  
Author(s):  
Solweig Sundén Pikner ◽  
Kerstin Gröndahl ◽  
Torsten Jemt ◽  
Bertil Friberg

2019 ◽  
Vol 45 (6) ◽  
pp. 469-473
Author(s):  
Mayla Kezy Silva Teixeira ◽  
Mariana Ribeiro de Moraes Rego ◽  
Marcelo Ferreira Torres da Silva ◽  
Eduardo José Veras Lourenço ◽  
Carlos Marcelo Figueredo ◽  
...  

The aim of this clinical study was to evaluate bacterial colonization, marginal bone loss, and optical alveolar density in implants with Morse taper (MT) and external hexagon (EH) connections. Thirty-five implants were installed in 7 patients (mean age: 65.8 ± 6.7 years). Implants were divided into 2 groups, according to platform design: G1 - MT, installed 2mm infra-osseous and G2 - EH, positioned according to Branemark protocol. Patients were evaluated at baseline (T0), 21 days (T1), 3 months (T2), 6 months (T3), and 12 months (T4) after installations. Bone loss and alveolar density were evaluated by standardized periapical radiographs and bacterial profile with checkerboard DNA–DNA hybridization. Statistical analyses were performed using SPSS 23.0. To present the results, boxplots and a line graph of mean were used. P-values ≤ .05 were statistically significant. After 3 months, alveolar bone loss was significantly higher in the G2 (T2-T0: P = .006; T3-T0: P = .003; and T4-T0: P = .005). No significant differences between G1 and G2 groups were observed for optical alveolar density. Microbiological analysis showed similar profiles between studied groups; however, there were significantly higher counts of Tannerella forsythia (P = .048), Campylobacter showae (P = .038), and Actinomyces naeslundii (P = .027) in G1 after 12 months. Based on the results of this study, it can be concluded that there was less peri-implant bone loss in MT compared to EH connections, but microbiological profile did not seem to influence bone changes.


2012 ◽  
Vol 38 (S1) ◽  
pp. 441-448 ◽  
Author(s):  
Amir Moeintaghavi ◽  
Mehrdad Radvar ◽  
Hamid Reza Arab ◽  
Hamid Reza Boostani ◽  
Elham Ghiami

The use of osseointegrated implants as a foundation for the prosthetic replacement of missing teeth has become widespread, with new dental implant systems being introduced every year. There is growing interest in identifying the factors associated with implant failure, such as implant type. This study was designed to establish the relationship between implant type and success. Eighty-eight patients (mean age, 52 years) with 268 implants (110 BioHorizons, 60 ITI, 60 Paragon, 18 Xive, six 3i, and 19 Allfit) participated in this 5-year retrospective study. Statistical significance was defined for P &lt; .05. Peri-implant probing depth was associated with bone loss and bleeding on probing. Implant failure was not associated with implant brand. Maximal (or minimal) peri-implant probing depth and bone loss values were seen at anterior regions (or premolars). Maximal (or minimal) bleeding on probing was seen at the posterior (or anterior) region. No significant differences were observed between the different systems in terms of implant failure.


Sign in / Sign up

Export Citation Format

Share Document