scholarly journals Cr(VI) Removal from Aqueous by Adsorption on Amine-Functionalized Mesoporous Silica Prepared from Silica Fume

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Xitong Li ◽  
Caiyun Han ◽  
Wenjie Zhu ◽  
Wenhui Ma ◽  
Yongming Luo ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mesoporous Silica ◽  
Silica Fume ◽  
Photoelectron Spectroscopy ◽  
Linear Regression Analysis ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
X Ray ◽  
Functionalized Mesoporous Silica ◽  
Equilibrium Data

Amino-functionalized mesoporous silica MCM-41 materials have been prepared to develop efficient adsorbents of Cr(VI) in wastewater, using silica fume as silica source. Functionalization with amino groups has been carried out by using grafting method. The materials have been characterized by means of X-ray diffraction (XRD), nitrogen (N2) adsorption-desorption, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Adsorption potential of the material for Cr(VI) removal from aqueous solution was investigated by varying experimental conditions such as pH, initial metal concentration, and contact time. The equilibrium data were analyzed using the Langmuir and Freundlich isotherm by linear regression analysis, and the results show that the adsorption equilibrium data obeyed the Langmuir model. In addition, the kinetics analysis revealed that the overall adsorption process was successfully fitted with the pseudo-second-order kinetic model.

scholarly journals 3D Modeling of Silver Doped ZrO2 Coupled Graphene-Based Mesoporous Silica Quaternary Nanocomposite for a Nonenzymatic Glucose Sensing Effects

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 193
Author(s):  
Kamrun Nahar Fatema ◽  
Chang-Sung Lim ◽  
Yin Liu ◽  
Kwang-Youn Cho ◽  
Chong-Hun Jung ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Mesoporous Silica ◽  
Photoelectron Spectroscopy ◽  
Glucose Sensor ◽  
Diffuse Reflectance Spectroscopy ◽  
Active Material ◽  
Glucose Sensing ◽  
X Ray ◽  
Transmission Electron

We described the novel nanocomposite of silver doped ZrO2 combined graphene-based mesoporous silica (ZrO2-Ag-G-SiO2,) in bases of low-cost and self-assembly strategy. Synthesized ZrO2-Ag-G-SiO2 were characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectrometry (EDX), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Raman spectroscopy, Nitrogen adsorption-desorption isotherms, X-ray photoelectron spectroscopy (XPS), and Diffuse Reflectance Spectroscopy (DRS). The ZrO2-Ag-G-SiO2 as an enzyme-free glucose sensor active material toward coordinate electro-oxidation of glucose was considered through cyclic voltammetry in significant electrolytes, such as phosphate buffer (PBS) at pH 7.4 and commercial urine. Utilizing ZrO2-Ag-G-SiO2, glucose detecting may well be finished with effective electrocatalytic performance toward organically important concentrations with the current reaction of 9.0 × 10−3 mAcm−2 and 0.05 mmol/L at the lowest potential of +0.2 V, thus fulfilling the elemental prerequisites for glucose detecting within the urine. Likewise, the ZrO2-Ag-G-SiO2 electrode can be worked for glucose detecting within the interferometer substances (e.g., ascorbic corrosive, lactose, fructose, and starch) in urine at proper pH conditions. Our results highlight the potential usages for qualitative and quantitative electrochemical investigation of glucose through the ZrO2-Ag-G-SiO2 sensor for glucose detecting within the urine concentration.

scholarly journals Biomass-Derived Activated Carbon as a Catalyst for the Effective Degradation of Rhodamine B dye

Processes ◽  
2020 ◽  
Vol 8 (8) ◽  
pp. 926
Author(s):  
Shamim Ahmed Hira ◽  
Mohammad Yusuf ◽  
Dicky Annas ◽  
Hu Shi Hui ◽  
Kang Hyun Park
Keyword(s):  
Electron Microscopy ◽  
Activated Carbon ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
High Specific Surface Area ◽  
High Porosity ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
X Ray ◽  
Transmission Electron

Activated carbon (AC) was fabricated from carrot waste using ZnCl2 as the activating agent and calcined at 700 °C for 2 h in a tube furnace. The as-synthesized AC was characterized using Fourier-transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis; the results revealed that it exhibited a high specific surface area and high porosity. Moreover, this material displayed superior catalytic activity for the degradation of toxic Rhodamine B (RhB) dye. Rate constant for the degradation of RhB was ascertained at different experimental conditions. Lastly, we used the Arrhenius equation and determined that the activation energy for the decomposition of RhB using AC was approximately 35.9 kJ mol−1, which was very low. Hopefully it will create a great platform for the degradation of other toxic dye in near future.

scholarly journals Preparation of pod-shaped TiO 2 and Ag@TiO 2 nano burst tubes and their photocatalytic activity

2019 ◽  
Vol 6 (9) ◽  
pp. 191019 ◽  
Author(s):  
Shang Wang ◽  
Zhaolian Han ◽  
Tingting Di ◽  
Rui Li ◽  
Siyuan Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Oxalic Acid ◽  
Ultraviolet Light ◽  
Photoelectron Spectroscopy ◽  
Degradation Process ◽  
Catalytic Performance ◽  
Tetrabutyl Titanate ◽  
Order Kinetic ◽  
X Ray

The pod-shaped TiO 2 nano burst tubes (TiO 2 NBTs) were prepared by the combination of electrospinning and impregnation calcination with oxalic acid (H 2 C 2 O 4 ), polystyrene (PS) and tetrabutyl titanate. The silver nanoparticles (AgNPs) were loaded onto the surface of TiO 2 NBTs by ultraviolet light reduction method to prepare pod-shaped Ag@TiO 2 NBTs. In this work, we analysed the effect of the amount of oxalic acid on the cracking degree of TiO 2 NBTs; the effect of the concentration of AgNO 3 solution on the particle size and loading of AgNPs on the surface of TiO 2 NBTs. Scanning electron microscopy and transmission electron microscopy investigated the surface morphology of samples. X-ray diffraction and X-ray photoelectron spectroscopy characterized the structure and composition of samples. Rhodamine B (RhB) solution was used to evaluate the photocatalytic activity of pod-shaped TiO 2 NBTs and Ag@TiO 2 NBTs. The results showed that TiO 2 NBTs degraded 91.0% of RhB under ultraviolet light, Ag@TiO 2 NBTs degraded 95.5% under visible light for 75 and 60 min, respectively. The degradation process of both samples was consistent with the Langmuir–Hinshelwood first-order kinetic equation. Therefore, the catalytic performance of the sample is: Ag@TiO 2 NBTs > TiO 2 NBTs > TiO 2 nanotubes.

scholarly journals The Preparation of Pd/Foam-Ni Electrode and Its Electrocatalytic Hydrodechlorination for Monochlorophenol Isomers

Catalysts ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 378 ◽  
Author(s):  
Junjing Li ◽  
Huan Wang ◽  
Liang Wang ◽  
Chang Ma ◽  
Cong Luan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Catalytic Performance ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Order Kinetic Model ◽  
Good Catalytic Activity ◽  
Promising Application

Noble metal palladium modified foamed nickel electrode (Pd/foam-Ni) was prepared by electrodeposition method. The fabricated electrode showed better catalytic performance than the Pd/foam-Ni prepared by conventional electroless deposition. The catalysts were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Electrocatalytic activity of the Pd/Ni was studied for the hydrodechlorination of monochlorophenol isomers. The Pd/Ni exhibited good catalytic activity for 3-chlorophenol (3-CP). Complete decomposition of chlorophenol isomers could be achieved within 2 h, and the hydrodechlorination process conformed to the pseudo-first-order kinetic model. It showed a supreme stability after recycling for 5 times. The Pd/Ni exhibited a promising application prospect with high effectiveness and low Pd loading.

Controlled Synthesis of Coral-Like CuO Dendrites with Enhanced Photocatalytic Performance

2020 ◽  
Vol 20 (8) ◽  
pp. 5028-5036 ◽  
Author(s):  
Feng Gao ◽  
Yi Wu ◽  
Xiang-Fei He ◽  
Jia-Xuan Yin ◽  
Li-Zhao Qin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Performance ◽  
Volume Ratio ◽  
Molar Ratio ◽  
Ammonium Bromide ◽  
Experimental Conditions ◽  
X Ray ◽  
Bet Analysis

In this work, coral-like CuO dendrites were successfully synthesized by a solvothermal method in the mixed solvent of distilled water and ethanol with assistance of dodecyl trimethyl ammonium bromide (DTAB). The products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) analysis techniques, to investigate their structure and morphology. The coral-like CuO dendrites were about 1 μm in length, with many dendrites pointing to a common center. The influence of experimental conditions on morphology, such as volume ratio of water to ethanol, surfactant DTAB and molar ratio of Na2CO3 and Cu(CH3COO)2, was also discussed. Time-dependent experiment was carried out to explore the formation mechanism while a “particle-sheet-dendrite (PSD)” mechanism was proposed to explain the growth process. The as-prepared CuO dendrites were used to degrade methylene blue (MB) under visible light irradiation in the presence of H2O2, where over 98% of methylene blue (MB) was degraded in 1 h. Results from the study demonstrated that the as-prepared coral-like CuO dendrites exhibited enhanced photocatalytic performance and excellent stability and reusability.

scholarly journals Simultaneous adsorption and reduction of hexavalent chromium on biochar-supported nanoscale zero-valent iron (nZVI) in aqueous solution

2020 ◽  
Vol 82 (7) ◽  
pp. 1339-1349
Author(s):  
Fengfeng Ma ◽  
Bakunzibake Philippe ◽  
Baowei Zhao ◽  
Jingru Diao ◽  
Jian Li
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Photoelectron Spectroscopy ◽  
Zero Valent Iron ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Nanoscale Zero Valent Iron ◽  
Pseudo Second Order

Abstract Flax straw biochar (FSBC)-supported nanoscale zero-valent iron (nZVI) composite (nZVI-FSBC) combining the advantages of nZVI and biochar was synthesized and tested for Cr(VI) removal efficiency from aqueous solution. Surface morphology and structure of FSBC and nZVI-FSBC were characterized by scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller techniques, which help to clarify the mechanism of Cr(VI) removal from aqueous solution. The adsorption of Cr(VI) onto FSBC and nZVI-FSBC was best described by the pseudo-second-order and the Sips model. Compared with FSBC, nZVI-FSBC remarkably improved the performance in removing Cr(VI) under identical experimental conditions. Due to the collaborative effect of adsorption and reduction of nZVI-FSBC, the adsorption capacity of nZVI-FSBC for Cr(VI) is up to 186.99 mg/g. The results obtained by XPS, XRD, and FTIR confirmed that adsorption and reduction dominated the processes of Cr(VI) removal by nZVI-FSBC. As a supporter, FSBC not only improved the dispersion of nZVI, but also undertook the adsorption task of Cr(VI) removal. The surface oxygen-containing functional groups of nZVI-FSBC mainly participated in the adsorption part, and the nZVI promoted the Cr(VI) removal through the redox reactions. These observations indicated that the nZVI-FSBC can be considered as potential adsorbents to remove Cr(VI) for environment remediation.

scholarly journals Effective Interactions of Ag Nanoparticles on the Surface of SBA-15 in Performing Deep Desulfurization of Real Diesel Fuel

Catalysts ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 593 ◽  
Author(s):  
Clenildo de Longe ◽  
Rafael Viana Sales ◽  
Anne Beatriz Figueira Câmara ◽  
Heloise Oliveira Medeiros de Araújo Moura ◽  
Enrique Rodríguez-Castellón ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Diesel Fuel ◽  
Photoelectron Spectroscopy ◽  
Ag Nanoparticles ◽  
Dark Field ◽  
X Ray ◽  
Adsorbent Surface ◽  
Scanning Transmission ◽  
Annular Dark Field ◽  
Equilibrium Data

SBA-15 materials as-synthesized and impregnated with Ag nanoparticles were applied to perform adsorptive desulfurization of real diesel fuel. High-angle annular dark-field scanning transmission electron microscopy and field-emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (HAADF-STEM-EDX and FESEM-EDX) and X-ray photoelectron spectroscopy (XPS) results confirmed that there is uniform distribution of Ag nanodomains on the surface and in the channels of a 2AgSBA-15 (2% Ag) sample. The interaction between sulfur compounds and adsorbent mainly occurred via π-complexation mechanisms, as observed via XPS and equilibrium data. The kinetic results for 2AgSBA-15 were better fitted to the pseudo-second-order model (R2 > 0.9999), indicating that the determining step of the adsorptive process is chemisorption, whereas the equilibrium results were better fitted to the Langmuir model (R2 > 0.9994), thus indicating that the adsorption occurs on the adsorbent surface monolayer with significant adsorption capacity (qm = 20.30 mgS/g), approximately two times greater than that observed for pure SBA-15. The mean desulfurization reached by the adsorbents was up to 86.8% for six recycling steps.

scholarly journals Hydrogen Production from Aqueous Methanol Solutions Using Ti–Zr Mixed Oxides as Photocatalysts under UV Irradiation

Catalysts ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 938 ◽  
Author(s):  
Pérez-Larios ◽  
Rico ◽  
Anaya-Esparza ◽  
Vargas ◽  
González-Silva ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Mixed Oxides ◽  
Sol Gel ◽  
High Resolution Electron Microscopy ◽  
Aqueous Methanol ◽  
Experimental Conditions ◽  
X Ray ◽  
Methanol Solutions ◽  
Aqueous Methanol Solutions

The synthesis and characterisation of Ti–Zr mixed oxides containing 1 to 10 wt.% of Zr is herein reported. In addition, the samples were tested as photocatalysts in the generation of hydrogen from aqueous methanol solutions. The solids were prepared by sol-gel and then characterised by X-ray diffraction, high resolution electron microscopy, X-ray photoelectron spectroscopy, physisorption of nitrogen, scanning electron microscopy, UV-vis and Raman spectroscopies. The results show the presence of anatase as a predominant structure and the oxides present larger specific surface areas than that of pure titania. A maximum value of 168 m2/g was determined for the sample with 5 wt.% of zirconium. The calculated band gap energies varied from 3.05 to 3.15 eV. It was observed that the greater the zirconium content in the solid, the higher the generation rate of hydrogen when testing the Ti–Zr solids as photocatalysts. Under our experimental conditions, the best catalyst, Ti–Zr oxide with 10 wt. % Zr, showed a production rate of 2100 μmol of H2/h which was about tenfold higher than that observed for pure titania.

scholarly journals Green synthesis of stable Fe,Cu oxide nanocomposites from loquat leaf extracts for removal of Norfloxacin and Ciprofloxacin

2020 ◽  
Vol 81 (4) ◽  
pp. 694-708
Author(s):  
Qiujie Liu ◽  
Peili Ma ◽  
Penglei Liu ◽  
Hongping Li ◽  
Xiuli Han ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Single Step ◽  
Synthesis Methods ◽  
X Ray Diffraction ◽  
Step Method ◽  
Leaf Extracts ◽  
X Ray ◽  
Transmission Electron ◽  
Equilibrium Data

Abstract Mass production of nanomaterials to remove pollutants from water still faces many challenges, mainly due to the complexity of the synthesis methods involved and the use of dangerous reagents. The green method of preparation of nanomaterials from plants can effectively solve these problems. Fe,Cu oxide nanocomposites (Fe-Cu-NCs) were synthesized by a green and single-step method using loquat leaf extracts, and were used as an adsorbent for removal of Norfloxacin (NOR) and Ciprofloxacin (CIP) from aqueous solution. The synthesized adsorbent showed excellent adsorption properties for NOR and CIP. The experimental equilibrium data fitted the Redlich-Peterson and Koble-Corrigan models well and the maximum adsorption capacities of Fe-Cu-NCs calculated by the Langmuir model for NOR and CIP were 1.182 mmol/g and 1.103 mmol/g, respectively, at 293 K. Additionally, the morphologies and properties of Fe-Cu-NCs were characterized by transmission electron microscopy (TEM), scanning electron microscopy X-ray energy-dispersive spectroscopy (SEM-EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis and the adsorption mechanism of NOR and CIP onto Fe-Cu-NCs was discussed. Thermodynamic parameters revealed that the adsorption process was spontaneous and endothermic. This study indicated that Fe-Cu-NCs are a potential adsorbent and provide a simple and convenient strategy for the purification of antibiotics-laden wastewater.

scholarly journals Novel CuO/Mn3O4/ZnO nanocomposite with superior photocatalytic activity for removal of Rabeprazole from water

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sauvik Raha ◽  
Dipyaman Mohanta ◽  
Md. Ahmaruzzaman
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Photoelectron Spectroscopy ◽  
Oxygen Demand ◽  
Order Kinetic ◽  
Liquid Chromatograph ◽  
X Ray ◽  
Transmission Electron ◽  
Order Kinetic Model

AbstractIn this work, a nanohybrid of CuO/Mn3O4/ZnO was generated through a simple hydrothermal based procedure. The CuO/Mn3O4/ZnO nanohybrid has been characterized using X-ray diffraction, transmission electron microscopy high resolution transmission electron microscopy, X-ray photoelectron spectroscopy, scanning electron microscopy and energy dispersive X-ray analysis. UV–visible spectrophotometry and photoluminescence techniques allowed evaluation of optical properties that additionally suggested the prevalence of strong interfacial interaction between the three moieties of the nanohybrid and suppressed electron–hole recombination. The hybrid photocatalyst brought on ~ 97.02 ± 1.15% disintegration of rabeprazole when illuminated with visible light. The progress of the photodegradation was in conformity with pseudo-first order kinetic model and had a velocity constant of 0.07773 min−1. Additionally, ~ 84.45% of total organic carbon removal was achieved while chemical oxygen demand was reduced by ~ 73.01%. Using high resolution liquid chromatograph mass spectrometry technique, identification of the degraded products was made and accordingly the mechanistic route of the aforesaid degradation was proposed.

Sign in / Sign up

Export Citation Format

Share Document