scholarly journals A Comparative Study between Physical Properties of Compact and Ring Yarn Fabrics Produced from Medium and Coarser Yarn Counts

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Ghada Ali Abou-Nassif
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Breaking Strength ◽  
Physical And Mechanical Properties ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Ring Yarn ◽  
Spun Yarns ◽  
Compact Spinning ◽  
Tearing Strength

In compact spinning, fibers in drawing stage are condensed using air suction, which results in the produced yarns which significantly differ from ring spun yarns in their physical and mechanical properties. This study compares between physical properties of compact and ring yarn fabrics woven from coarser and medium yarn counts. The experimental results were statistically analyzed using ANOVA. The findings of this study revealed that woven fabrics produced from compact spun yarns are superior to those produced from ring spun yarns with respect to breaking strength, breaking elongation, abrasion resistance, tearing strength, and air permeability.

Effects of finishing on the air permeability of woven fabrics

2013 ◽  
Vol 10 (6) ◽  
pp. 507-514 ◽  
Author(s):  
M. Havlová
Keyword(s):  
Mechanical Properties ◽  
Geometric Structure ◽  
Physical And Mechanical Properties ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Laboratory Measurement ◽  
Textile Materials ◽  
Small Change ◽  
The Given ◽  
Non Destructive

The main aim of this paper is to estimate the influence of finishing to the permeability of woven fabrics made of multifilament threads. The property of the textile permeability is closely connected with the geometric structure of the given textile materials. A very small change in the structure of the fabric at a given location causes a change in the permeability at this location. Such a change in the structure may be due to the finishing of fabric. A demanded requirement in several applications areas of textiles is the homogeneity of their physical and mechanical properties. The laboratory measurement of the fabric permeability is very suitable for assessment of uniformity across the fabric area, because the test is very simple and non-destructive. In this research a set of polyamide and polyester multifilament woven fabrics was used. These fabrics were available both in the gray state and with the various types of applied finishes.

scholarly journals Experimental Study and Effect on Recycled Fibers Blended with Rotor/OE Yarns for the Production of Handloom Fabrics and Their Properties

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Dessalegn Awgichew ◽  
S. Sakthivel ◽  
Eshetu Solomon ◽  
Addisalem Bayu ◽  
Robel Legese ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Experimental Study ◽  
Air Permeability ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Breaking Force ◽  
Spun Yarns ◽  
Recycled Fiber ◽  
Recycled Fibers ◽  
Textile Sector

The uses of recycled materials have gained massive importance in the textile sector and other application areas as the effects of reducing natural resources are felt worldwide. This study aimed to analyze the effects of recycled fiber usage on the properties of OE-rotor spun yarns and hand-woven fabrics produced from these yarns. For this purpose, OE-rotor yarns are produced at different proportion levels from virgin cotton and recycled fibers derived from knitted garment wastes at 25%, 50%, and 75%, respectively. For a better assessment, properties of OE-rotor yarns that contain recycled fibers and 100% virgin cotton OE-rotor yarns are compared. Physical, structural, and mechanical properties such as unevenness, imperfections, hairiness, breaking force, and elongation are analyzed by Uster Tester 5 SX, Uster Zweigle Hairiness Tester 5, and Uster Tensorapid 3. Plain and twill hand-woven fabrics are produced from OE-rotor spun yarns. Effects of recycled fiber proportion on hand-woven fabric properties such as pilling, abrasion resistance, and air permeability were also evaluated. Results showed that the use of up to 75% of recycled fiber cotton blended yarns shows no statistically significant differences in yarn and fabric properties.

PEMANFAATAN KAYU AKASIA MANGIUM (Acacia mangium Willd) UNTUK MEBEL

2012 ◽  
Vol 4 (1) ◽  
pp. 1
Author(s):  
Djoko Purwanto
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physical Properties ◽  
Treatment Process ◽  
Acacia Mangium ◽  
Physical And Mechanical Properties ◽  
Wood Fibers ◽  
Test Parameters ◽  
Mechanical And Physical Properties ◽  
Scale Scores

Timber Acacia mangium (Acacia mangium, Willd) for Furniture. The study aims to determine the mechanical and physical properties and the decorative value (color and fiber) wood of acacia mangium with using finishing materials. This type of finishing material used is ultran lasur natural dof ,ultran lasur classic teak, aqua politur clear dof, aqua politur akasia dan aqua politur cherry. After finishing the wood is stored for 3 months. Test parameters were observed, namely, physical and mechanical properties of wood, adhesion of finishing materials, color and appearance of the fiber, and timber dimensions expansion. The results showed that the mechanical physical properties of acacia wood qualified SNI. 01-0608-89 about the physical and mechanical properties of wood for furniture, air dry the moisture content from 13.78 to 14.89%, flexural strength from 509.25 to 680.50 kg/cm2, and compressive strength parallel to fiber 342.1 - 412.9 kg/cm2. Finishing the treatment process using five types of finishing materials can increase the decorative value (color and fiber) wood. Before finishing the process of acacia mangium wood has the appearance of colors and fibers and less attractive (scale scores 2-3), after finishing acacia wood fibers have the appearance of colors and interesting and very interesting (scale 4-5).Keywords: mangium wood, mechanical properties, decorative value, finishing, furniture.

BRUSH ALLOY 3

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Copper Alloy ◽  
Elevated Temperatures ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Good Corrosion Resistance

Abstract BRUSH Alloy 3 offers the highest electrical and thermal conductivity of any beryllium-copper alloy. It possesses an excellent combination of moderate strength, good corrosion resistance and good resistance to moderately elevated temperatures. Because of its unique physical and mechanical properties, Brush Alloy 3 finds widespread use in welding applications (RWMA Class 3), current-carrying springs, switch and instrument parts and similar components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-454. Producer or source: Brush Wellman Inc..

ANSONIA C14500

Alloy Digest ◽  
2008 ◽  
Vol 57 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Pure Copper ◽  
Physical And Mechanical Properties ◽  
Heat Treating

Abstract Ansonia alloy C14500 has unique fabrication properties while maintaining both physical and mechanical properties close to pure copper. The addition of Tellurium makes the alloy free machining. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on forming, heat treating, machining, and joining. Filing Code: CU-752. Producer or source: Ansonia Copper & Brass Inc.

KAISER ALUMINUM ALLOY KA62

Alloy Digest ◽  
1999 ◽  
Vol 48 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Lead Free ◽  
Kaiser Aluminum

Abstract Kaiser Aluminum alloy KA62 (Tennalum alloy KA62) is a lead-free alternative to 6262. It offers good machinability and corrosion resistance and displays good acceptance of coatings (anodize response). It can be used in place of 6262 because its physical and mechanical properties are equivalent to those of 6262 (see Alloy Digest Al-361, September 1999). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: AL-362. Producer or source: Tennalum, A Division of Kaiser Aluminum.

scholarly journals LAMINAR INCLUSION IN SUGARCANE BAGASSE PARTICLEBOARD

CERNE ◽  
2017 ◽  
Vol 23 (2) ◽  
pp. 153-160
Author(s):  
Stefania Lima Oliveira ◽  
Ticyane Pereira Freire ◽  
Tamires Galvão Tavares Pereira ◽  
Lourival Marin Mendes ◽  
Rafael Farinassi Mendes
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Sugarcane Bagasse ◽  
Wood Species ◽  
Sugar Cane ◽  
Physical And Mechanical Properties ◽  
Pressure Level ◽  
Sugar Cane Bagasse

ABSTRACT The objective of this study is to assess the effect of the laminar inclusion on the physical and mechanical properties of sugarcane bagasse particleboard. We used the commercial panels of sugarcane bagasse produced in China. To evaluate the effect of the laminar inclusion was tested two wood species (Pinus and Eucalyptus) and two pressures (10 and 15 kgf.cm-2) along with a control (without laminar inclusion). The panels with laminar inclusion obtained improvements in the physical properties, with a significant reduction in the WA2h, WA24h and TS2h. There was a significant increase in the properties MOE and MOR parallel and Janka hardness, while the properties MOE and MOR perpendicular decreased significantly. The pinus and eucalyptus veneers inclusion resulted in similar results when added to the panel with a 10 kgf.cm-2 pressure. The use of 15 kgf.cm-2 pressure is not indicated for the pinus veneer inclusion in sugar cane bagasse panels. There was no effect of the pressure level when evaluating the eucalyptus veneer inclusion on the properties of the sugarcane bagasse panels.

Some Physical Properties of Kola Nuts – A Response Surface Approach

2014 ◽  
Vol 28 (2) ◽  
pp. 251-255 ◽  
Author(s):  
Rahman Akinoso ◽  
Ademola K. Aremu ◽  
Ismail S. Balogun
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Response Surface ◽  
Physical And Mechanical Properties ◽  
Young Modulus ◽  
Moisture Loss ◽  
Surface Approach ◽  
Drying Temperature ◽  
Peak Energy ◽  
Level Of Significance

Abstract This work studied the effect of drying temperature and duration on some physical and mechanical properties of two varieties of kola nuts using a response surface methodology approach. Physical properties determined were length, breadth, thickness, sphericity, aspect ratio, colour and moisture loss, while mechanical properties were force at break, yield, and peak, deformation at break and peak, energy to peak, energy to break, and yield, and Young modulus. At 5% level of significance, only mass, moisture loss, and sphericity were the physical properties affected. However, all measured mechanical properties were affected by drying temperature and duration (p<0.05).

Intermetallics of Aluminum

2019 ◽  
Author(s):  
Georg Frommeyer ◽  
Sven Knippscheer
Keyword(s):  
Crystal Structure ◽  
Mechanical Properties ◽  
Plastic Deformation ◽  
High Temperature ◽  
Physical Properties ◽  
Intermetallic Compounds ◽  
Oxidation Behavior ◽  
Physical And Mechanical Properties ◽  
Structural Materials

Aluminum-rich intermetallic compounds of the Al3X-type with transmission metals (X = Ti. Zr, Nb, V) of Groups IVb and Vb are of interest in the development of novel high-temperature and lightweight structural materials. This article describes the important physical and mechanical properties of trialuminides with DO22 structure and their L12 variations. Topical coverage includes: crystal structure and selected physical properties, plastic deformation, oxidation behavior, and applications.

scholarly journals PENENTUAN SIFAT MEKANIS DAN FISIS BATU BATA DENGAN PENAMBAHAN ARANG TEMPURUNG KELAPA ASAL ALOR

2018 ◽  
Vol 3 (1) ◽  
pp. 80-85
Author(s):  
Ernawati Kawa ◽  
Minsyahril Bukit ◽  
Albert Zicko Johannes
Keyword(s):  
Mechanical Properties ◽  
Physical Properties ◽  
Compression Strength ◽  
Physical And Mechanical Properties ◽  
Strength Test ◽  
Coconut Shell ◽  
Mechanical And Physical Properties ◽  
Maximum Limit

Abstrak Telah dilakukan penelitian tentang penentuan sifat mekanis dan fisis batu bata dengan penambahan tempurung kelapa asal alor. Penenlitian ini bertujuan mengetahui kualitas batu bata yang memenuhi standar kelayakan sebagai bahan konstruksi dengan penambahan arang tempurung kelapa aal alor dengan presentasi 0%, 5%, 10%, 15% terhadap tanah liat (lempung). Batu bata dicetak dengan prosedur pemadatan, pengringn dan pembakaran. Setelah prosedur pencetakkan selesai kemudian di lanjutkan dengan pengujian sefat mekanis dan sifat fisis, yaitu uji kuat tekan (compression strength), densitas (density), porositas (porosity) hasil  kuat tekan batu bata didapatkan berdasarkan pengujian: a) uji kuat tekan, batu bata tanpa penambahan (0%) : 4,94 meemenuhi standar kuat tekan kelas 50 (SNI 15-2094-2000), b) uji porositas, batu bata 0% dan 5% : 3,82% dan 17,93% memenuhi standar porositas dengan batas maksimum 20% (SNI 15-2094-2000) dan uji densitas, batu bata tidak ada yang memenuhi standar (SII 0021-1978) Kata kunci: sifat mekanis, sifat fisis, tempurung kelapa, densitas, porositas, kuat tekan Abstract A research had been conducted to determine physical and mechanical properties of the bricks with the addition coconut shell charcoal from alor. This research aims at the quality of the bricks to meet the standars of eligibility as a contruction material. The addition of coconut shell charcoal is variate with the presentage 0%, 5%, 10%, 15% to the clay mass. The brick being printed with procedure compaction, drying, and baking. After the printing procedure is done then next is testing the mechanical and physical properties, that is compression strength test, density test, and porosity test. The brick quality result is obtained based on the test: a) compression strength test, the brick without addition (0%) : 4,94  (SNI 15-2094-2000) is comply with the standard compression strength the class 50 , b) porosity test, the brick 0% and 5% (3,82% and 17,93%) meet the standard with the maximum limit 20% ( SNI 15-2094-2000)  , and c) density test, every bricks does not meet the standard (SII 0021- 1978). Keywords: mechanical properties, physical properties, coconut shell, density, porosity, compression strength

Sign in / Sign up

Export Citation Format

Share Document