scholarly journals Density, Viscosity and Water Phase Stability of 1-Butanol-Gasoline Blends

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Zlata Mužíková ◽  
Pavel Šimáček ◽  
Milan Pospíšil ◽  
Gustav Šebor

The aim of this work was to describe the density and viscosity and water tolerance of 1-butanol-gasoline blends. Density and viscosity of 1-butanol are higher than that for gasoline and they can affect these parameters in the final gasoline blend. Density increases linearly and viscosity exponentially with the content of 1-butanol. Water solubility in 1-butanol-gasoline blend was determined as the temperature of a phase separation. The water was separated in the solid form at negative temperature and the phase separation point was determined as the temperature of crystallization. Influence of ethanol and ethers used for gasoline blending on water phase stability of 1-butanol-gasoline blend was studied. Ethers are slightly miscible with water and they improve the phase stability. While ethanol is completely miscible water and increases the water solubility in the blends. Finally, water extractions of both alcohols from gasoline were done. In contrast to the ethanol-gasoline blends, 1-butanol remained in the hydrocarbon phase.

2016 ◽  
Vol 52 (99) ◽  
pp. 14286-14289 ◽  
Author(s):  
Xinchen Kang ◽  
Xiaoxue Ma ◽  
Jianling Zhang ◽  
Xueqing Xing ◽  
Guang Mo ◽  
...  

Large nanodomains were formed in liquid solutions near the phase separation point where the size of nanodomains increased dramatically.


Soft Matter ◽  
2017 ◽  
Vol 13 (35) ◽  
pp. 5911-5921 ◽  
Author(s):  
Armand Barbot ◽  
Takeaki Araki

Rheologies properties of colloidal suspension in one-phase binary liquid mixtures are numerically studied. When approaching the phase separation point, the particles are aggregated and the viscosity is increased.


2010 ◽  
Vol 10 (16) ◽  
pp. 7795-7820 ◽  
Author(s):  
A. Zuend ◽  
C. Marcolli ◽  
T. Peter ◽  
J. H. Seinfeld

Abstract. Semivolatile organic and inorganic aerosol species partition between the gas and aerosol particle phases to maintain thermodynamic equilibrium. Liquid-liquid phase separation into an organic-rich and an aqueous electrolyte phase can occur in the aerosol as a result of the salting-out effect. Such liquid-liquid equilibria (LLE) affect the gas/particle partitioning of the different semivolatile compounds and might significantly alter both particle mass and composition as compared to a one-phase particle. We present a new liquid-liquid equilibrium and gas/particle partitioning model, using as a basis the group-contribution model AIOMFAC (Zuend et al., 2008). This model allows the reliable computation of the liquid-liquid coexistence curve (binodal), corresponding tie-lines, the limit of stability/metastability (spinodal), and further thermodynamic properties of multicomponent systems. Calculations for ternary and multicomponent alcohol/polyol-water-salt mixtures suggest that LLE are a prevalent feature of organic-inorganic aerosol systems. A six-component polyol-water-ammonium sulphate system is used to simulate effects of relative humidity (RH) and the presence of liquid-liquid phase separation on the gas/particle partitioning. RH, salt concentration, and hydrophilicity (water-solubility) are identified as key features in defining the region of a miscibility gap and govern the extent to which compound partitioning is affected by changes in RH. The model predicts that liquid-liquid phase separation can lead to either an increase or decrease in total particulate mass, depending on the overall composition of a system and the particle water content, which is related to the hydrophilicity of the different organic and inorganic compounds. Neglecting non-ideality and liquid-liquid phase separations by assuming an ideal mixture leads to an overestimation of the total particulate mass by up to 30% for the composition and RH range considered in the six-component system simulation. For simplified partitioning parametrizations, we suggest a modified definition of the effective saturation concentration, Cj*, by including water and other inorganics in the absorbing phase. Such a Cj* definition reduces the RH-dependency of the gas/particle partitioning of semivolatile organics in organic-inorganic aerosols by an order of magnitude as compared to the currently accepted definition, which considers the organic species only.


2019 ◽  
Vol 10 (34) ◽  
pp. 7887-7897 ◽  
Author(s):  
Ning Gao ◽  
Jiecheng Cui ◽  
Wanlin Zhang ◽  
Kai Feng ◽  
Yun Liang ◽  
...  

Osmotically driven, highly controllable and reconfigurable water–oil phase separation was achieved for the first time using ionic liquid systems.


2018 ◽  
Vol 777 ◽  
pp. 232-237 ◽  
Author(s):  
Jing Fang Xu ◽  
Yu Ying Xue ◽  
Man Liu ◽  
Fa Wang Zhang ◽  
Ying Tang ◽  
...  

In this paper, the castor oil, as additives, has been investigated on the phase separation temperature of M15, M30, M50 and M65 methanol gasoline at-25.0°C to 40.0°C, respectively. The effect of the additives on the phase stability and saturation vapour pressure was discussed. It was found that castor oil derivatives have good phase stability to various ratio methanol gasoline blends. Introducing water in the methanol gasoline blends need much amount of methyl castor oil to realize phase mixable. Besides, the castor oil can depress the saturation vapour pressure of methanol gasoline effective as well. With these data, it can be concluded that the castor oil have the great potential to be used gasoline-methanol additives.


2018 ◽  
Vol 20 (18) ◽  
pp. 4236-4244 ◽  
Author(s):  
Xiaoyan Pei ◽  
Dazhen Xiong ◽  
Yuanchao Pei ◽  
Huiyong Wang ◽  
Jianji Wang

Stimuli-responsive ionic liquid microemulsions can be reversibly switched from W/O monophase to oil–water phase separation upon alternate bubbling and removal of CO2.


Sign in / Sign up

Export Citation Format

Share Document