scholarly journals Experimental Study on Properties of Methane Diffusion of Coal Block under Triaxial Compressive Stress

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
Hong-Bao Zhao
Keyword(s):  
Compressive Stress ◽  
Phase Relation ◽  
Characteristic Curve ◽  
Special Point ◽  
Test Time ◽  
Methane Pressure ◽  
Standard Size ◽  
Coal Block ◽  
Diffusion Speed ◽  
Methane Diffusion

Taking the standard size coal block samples defined by ISRM as research objects, both properties of methane diffusion of coal block under triaxial compressive stress and characteristic influences caused by methane pressure were systematically studied with thermo-fluid-solid coupling with triaxial servocontrolled seepage equipment of methane-containing coal. The result shows the methane diffusion property of coal block under triaxial compressive stress was shown in four-stage as follow, first is sharply reduce stage, second is hyperbolic reduce stage, third is close to a fixed value stage, fourth stage is 0. There is a special point making the reduced rate of characteristic curve of methane diffusion speed become sharply small; the influences of shape of methane diffusion speed characteristic curve caused by methane pressure are not obvious, which only is shown in numerical size of methane diffusion speed. Test time was extended required by appear of the special point makes the reduce rate of methane diffusion speed become sharply small. The fitting four-phase relation of methane diffusion of coal block under triaxial compressive stress was obtained, and the idea is proposed that influences of the fitting four-phase relation caused by methane pressure were only shown in value of fitting parameters.

scholarly journals Improvement of Experimental Equipment Based on the One-Step Outflow Test and Research on Rapid Determining SWCC

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Jiaqi Wu ◽  
Huan Li ◽  
Anming Wang ◽  
Zhiquan Huang
Keyword(s):  
Test Data ◽  
Characteristic Curve ◽  
Influence Factors ◽  
Test Time ◽  
Inversion Method ◽  
Pressure Plate ◽  
One Step ◽  
The One ◽  
Migration Analysis ◽  
Hydrus 1D

The soil-water characteristic curve (SWCC) is an important hydraulic parameter for modeling water flow and contaminant transport in the unsaturated soil. However, direct measurement of the SWCC is still difficult. The commonly used measuring instrument in the laboratory is the pressure plate extractor. In this paper, the original pressure plate extractor has been improved based on the one-step outflow test. Compared with the original pressure plate extractor, three devices, water storage, data acquisition system, and bubbles scouring device, are added to the improved pressure plate extractor. The improved equipment eliminates the problems of long test time consumption and inaccurate test data. A one-step outflow test is performed utilizing the improved pressure plate extractor. The test data (the amount of spilled water and the time of pressurization) are substituted into the one-dimensional moisture migration analysis software HYDRUS-1D. The parameters (α, m, and n) are identified by the numerical inversion method in the inversion module of the HYDRUS-1D, which are associated with the VG model to fit SWCC. The fitted SWCC is highly consistent with the measured SWCC, which is obtained from the conventional test of the original pressure plate extractor. Results confirm that the improved pressure plate extractor not only saves considerable time but also effectively measures the SWCC. The improved pressure plate extractor also involves a simple operation. The influence factors of controlling the geometry of SWCC are also discussed, the results of the discussion confirm that the geometry of SWCC is directly controlled by pore distribution, and the consolidation pressure is an indirect factor.

scholarly journals Fitting Performance of Different Models on Loess Particle Size Distribution Curves

2017 ◽  
Vol 2017 ◽  
pp. 1-15 ◽  
Author(s):  
Wei Liu ◽  
Wenwu Chen ◽  
Jun Bi ◽  
Gaochao Lin ◽  
Weijiang Wu ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Empirical Model ◽  
Characteristic Curve ◽  
Clay Content ◽  
Gompertz Model ◽  
Test Time ◽  
Malan Loess ◽  
The Relationship

The soil water characteristic curve (SWCC) describes the relationship between matric suction and moisture of soil, the testing process of which is time-consuming. The test time of particle size distribution (PSD), in contrast, is relatively short. Thus, it is quite important to establish a proper model for PSD to forecast SWCC. This paper analyzed PSD of 25 groups of loess by way of laser diffraction technique (LD) and sieve-settlement method. Works were carried out on fitting analysis on PSD with Logarithmic model, Fredlund model, Jaky model, and Gompertz model. Statistical method was used to explain the fitting performance. Meanwhile, an empirical model was put forward. Compared to the four models, the empirical model has fewer parameters, simple model form, and smaller fluctuations of parameters. Results of LD showed higher clay content but lower silt content. It is suggested that Fredlund model or the empirical model be adopted to forecast SWCC of Malan loess.

Forensic applications of IR infrared microscopic internal reflection spectroscopy

1992 ◽  
Vol 50 (2) ◽  
pp. 1528-1529
Author(s):  
Edward G. Bartick ◽  
John A. Reffner
Keyword(s):  
Specular Reflection ◽  
Forensic Analysis ◽  
Attenuated Total Reflection ◽  
Internal Reflection ◽  
Standard Size ◽  
Ir Microscopy ◽  
Ir Analysis ◽  
Plastic Explosives ◽  
Internal Reflection Spectroscopy ◽  
Reflectance Measurements

Since the introduction of commercial Fourier transform infrared (FTIR) microscopic systems in 1983, IR microscopy has developed as an important analytical tool in research, industry and forensic analysis. Because of the frequent encounter of small quantities of physical evidence found at crime scenes, spectroscopic IR microscopes have proven particularly valuable for forensic applications. Transmittance and reflectance measurements have proven very useful. Reflection-absorption, specular reflection, and diffuse reflection have all been applied. However, it has been only very recently that an internal reflection (IRS) objective has been commercially introduced.The IRS method, also known as attenuated total reflection (ATR), has proven very useful for IR analysis of standard size samples. The method has been applied to adhesive tapes, plastic explosives, and general applications in the analysis of opaque materials found as evidence. The small quantities or uncontaminated areas of specimens frequently found requiring forensic analysis will often be directly applicable to microscopic IRS analysis.

The relaxation of compressive biaxial strains in SOS via microtwins

1989 ◽  
Vol 47 ◽  
pp. 608-609
Author(s):  
M. E. Twigg ◽  
E. D. Richmond ◽  
J. G. Pellegrino
Keyword(s):  
Thin Film ◽  
Chemical Vapor Deposition ◽  
Molecular Beam Epitaxy ◽  
Compressive Stress ◽  
Vapor Deposition ◽  
Partial Dislocation ◽  
Molecular Beam ◽  
Volume Fraction ◽  
Chemical Vapor ◽  
Silicon Thin Film

For heteroepitaxial systems, such as silicon on sapphire (SOS), microtwins occur in significant numbers and are thought to contribute to strain relief in the silicon thin film. The size of this contribution can be assessed from TEM measurements, of the differential volume fraction of microtwins, dV/dν (the derivative of the microtwin volume V with respect to the film volume ν), for SOS grown by both chemical vapor deposition (CVD) and molecular beam epitaxy (MBE).In a (001) silicon thin film subjected to compressive stress along the [100] axis , this stress can be relieved by four twinning systems: a/6[211]/( lll), a/6(21l]/(l1l), a/6[21l] /( l1l), and a/6(2ll)/(1ll).3 For the a/6[211]/(1ll) system, the glide of a single a/6[2ll] twinning partial dislocation draws the two halves of the crystal, separated by the microtwin, closer together by a/3.

Stimulated Platelet Aggregation, Thromboxane B2 Formation and Platelet Sensitivity to Prostacyclin - A Critical Evaluation

1981 ◽  
Vol 45 (03) ◽  
pp. 204-207 ◽  
Author(s):  
Wolfgang Siess ◽  
Peter Roth ◽  
Peter C Weber
Keyword(s):  
Arachidonic Acid ◽  
Platelet Count ◽  
Platelet Aggregation ◽  
Reliable Method ◽  
Platelet Rich Plasma ◽  
Critical Evaluation ◽  
Vascular Diseases ◽  
Thromboxane B2 ◽  
Test Time ◽  
Stimulation Of

SummaryPlatelets have been implicated in the development of atherosclerotic and thrombotic vascular diseases. Evaluation of platelet aggregation in relation to endogenously formed compounds which affect platelet function may provide information of clinical and pharmacological relevance. We describe a method in which thromboxane B2 (TXB2) formation was analyzed following stimulation of platelet-rich plasma (PRP) with ADP, 1-epinephrine, collagen, and arachidonic acid. In addition, we determined platelet sensitivity to prostacyclin following ADP- and collagen-induced platelet aggregation. The parameters under study were found to depend on the platelet count in PRP, on the type and dose of the aggregating agent used, and on the test time after blood sampling. By standardization of these variables, a reliable method was established which can be used in clinical and pharmacological trials.

The Role of a Decision Rule in Symptomatic Pulmonary Embolism Patients with a Non-high Probability Ventilation-perfusion Scan

1997 ◽  
Vol 78 (02) ◽  
pp. 794-798 ◽  
Author(s):  
Bowine C Michel ◽  
Philomeen M M Kuijer ◽  
Joseph McDonnell ◽  
Edwin J R van Beek ◽  
Frans F H Rutten ◽  
...  
Keyword(s):  
Pulmonary Embolism ◽  
Decision Rule ◽  
Predictive Value ◽  
Patient Population ◽  
High Probability ◽  
Characteristic Curve ◽  
Stepwise Logistic Regression ◽  
Pulmonary Angiogram ◽  
Symptomatic Pulmonary Embolism ◽  
Perfusion Scan

Summary Background: In order to improve the use of information contained in the medical history and physical examination in patients with suspected pulmonary embolism and a non-high probability ventilation-perfusion scan, we assessed whether a simple, quantitative decision rule could be derived for the diagnosis or exclusion of pulmonary embolism. Methods: In 140 consecutive symptomatic patients with a non- high probability ventilation-perfusion scan and an interpretable pulmonary angiogram, various clinical and lung scan items were collected prospectively and analyzed by multivariate stepwise logistic regression analysis to identify the most informative combination of items. Results: The prevalence of proven pulmonary embolism in the patient population was 27.1%. A decision rule containing the presence of wheezing, previous deep venous thrombosis, recently developed or worsened cough, body temperature above 37° C and multiple defects on the perfusion scan was constructed. For the rule the area under the Receiver Operating Characteristic curve was larger than that of the prior probability of pulmonary embolism as assessed by the physician at presentation (0.76 versus 0.59; p = 0.0097). At the cut-off point with the maximal positive predictive value 2% of the patients scored positive, at the cut-off point with the maximal negative predictive value pulmonary embolism could be excluded in 16% of the patients. Conclusions: We derived a simple decision rule containing 5 easily interpretable variables for the patient population specified. The optimal use of the rule appears to be in the exclusion of pulmonary embolism. Prospective validation of this rule is indicated to confirm its clinical utility.

Sign in / Sign up

Export Citation Format

Share Document