scholarly journals Solution Processed Silver Nanoparticles in Dye-Sensitized Solar Cells

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Marko Berginc ◽  
Urša Opara Krašovec ◽  
Marko Topič
Keyword(s):  
Heat Treatment ◽  
Silver Nanoparticles ◽  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Optical Measurements ◽  
Plasmonic Effect ◽  
Ag Nps ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

A plasmonic effect of silver nanoparticles (Ag NPs) in dye-sensitized solar cells (DSSCs) is studied. The solutions of silver nitrate in isopropanol, ethylene glycol, or in TiO2sol were examined as possible precursors for Ag NPs formation. The solutions were dip-coated on the top of the porous TiO2layer. The results of optical measurements confirmed the formation of Ag NPs throughout the porous TiO2layer after the heat treatment of the layers above 100°C. Heat treatment at 220°C was found to be optimal regarding the formation of the Ag NPs. The porous TiO2layers with Ag NPs have been evaluated also in DSSC by measuring current-voltage characteristics and the external quantum efficiency of the cells. In addition, the amount of adsorbed dye has been determined to prove the plasmonic effect in the cells. TheI-Vcharacterization of the DSSCs revealed an increase of the short circuit current in the presence of Ag NPs although the amount of the attached dye molecules decreased. These results confirm that the performance enhancement is related to the plasmonic effect. However, neither a thin sol-gel TiO2layer nor poly(4-vinylpyridine) shells provide effective protection for the long term stability of the Ag NPs against the corrosion ofI3-/I-based electrolyte.

scholarly journals Structural and Optical Properties of Chemically Deposited Metal Chalcogenide Thin Film CrS and its Photovoltaic Application

2022 ◽  
Vol 34 (2) ◽  
pp. 279-283
Author(s):  
J. Chandrasekar ◽  
Durgachalam Manikandan
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Optical Measurements ◽  
Trap States ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this work, chromium sulfide (CrS) thin films were grown on the acetic acid substrates by chemical bath deposition to prepare non-toxic photovoltaic devices. The combined single-source precursor approach has been developed for the deposition method using tris(diethyldithiocarbamato)chromium(III) for the deposition of CrS thin films grown at bath temperatures of 30, 60 and 90 ºC and at a constant deposition time of 30-120 min. The sufrace mophology of the prepared films have been analyzed by SEM and HR-TEM techniques. The study of the films indicate the distributed roughness and nano bundled hexagonal structures. The energy dispersive X-ray (EDX) spectroscopy analysis conformed the presence of Cr and S. The polycrystalline behaviour of the films was studied by an XRD study which revealed the mixed phases with a predicted crystallite size of 20 nm. The optical measurements showed films had a maximum transmittance of 90% in the visible region and the evaluated energy band varied in the range of 2.2-2.378 eV with the change of bath temperatures. This suggests that CrS thin film prepared at 90 ºC has enhanced crystalline superiority. According to photoluminescence (PL) analysis, the green emission can be attributed to the presence of several deep trap states or defects in the CrS structure. Moreover, natural dye sensitized solar cells (DSSCs) in CrS thin film prepared at 90 ºC, Jsc (28.0 mA/cm2) produced a larger voltage in the short circuit as compared to synthetic dye sensitized solar cells (DSSCs) using CrS thin film Jsc (22.5 mA/cm2).

Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

2018 ◽  
Vol 382 ◽  
pp. 369-373
Author(s):  
Usana Mahanitipong ◽  
Preeyapat Prompan ◽  
Rukkiat Jitchati
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Photocurrent Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Ligand Charge Transfer ◽  
Sensitized Solar Cells ◽  
Open Circuit Photovoltage

The four thiocyanate free ruthenium(II) complexes; [Ru(N^N)2(C^N)]PF6were synthesized and characterized for dye sensitized solar cells (DSSCs). The results showed that the broad absorptions covered the visible region from metal to ligand charge transfer (MLCT) were obtained with the main peaks at 560, 490 and 400 nm. The materials were studied DSSC performance under standard AM 1.5. Compound PP1 showed the power conversion efficiency (PCE) at 3.10%, with a short-circuit photocurrent density (Jsc) of 7.99 mA cm-2, an open-circuit photovoltage (Voc) of 563 mV and a high fill factor (ff) of 0.690.

scholarly journals Improved Performance of Dye-Sensitized Solar Cells with TiO2 Nanoparticles/Zn-Doped TiO2 Hollow Fiber Photoanodes

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2922 ◽  
Author(s):  
Zainal Arifin ◽  
Suyitno Suyitno ◽  
Syamsul Hadi ◽  
Bayu Sutanto
Keyword(s):  
Solar Cells ◽  
Tio2 Nanoparticles ◽  
Double Layer ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Photocurrent Density ◽  
Light Transmittance ◽  
Doped Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this study, dye-sensitized solar cells (DSSCs) were fabricated using double-layer photoanodes consisting of TiO2 nanoparticles (NPs) and Zn-doped TiO2 hollow fibers (HFs). The TiO2 HFs were prepared by co-axial electrospinning and used as the light-scattering layer in the DSSC. The thickness variations of the TiO2 NP and Zn-doped TiO2 HF photoanode layers affect the performance of the DSSC, especially the short-circuit photocurrent density. The thickness of the TiO2 NP layer significantly affected the absorbance of photons and N719 dye molecules in the double-layer photoanode, while that of the Zn-doped TiO2 HF layer affected the scattering of light, as indicated by the low light transmittance in the photoanode. Conventional DSSCs consist of single-layer photoanodes, and exhibit relatively low efficiency, i.e., 1.293% and 0.89% for TiO2 NP and Zn-doped TiO2 HF, respectively. However, herein, the highest efficiency of the DSSC (3.122%) was achieved with a 15 μm NP-5 μm HF photoanode, for which the short-circuit photocurrent density, open-circuit photovoltage, and fill factor were 15.81 mA/cm2, 0.566 V, and 34.91%, respectively.

scholarly journals Structural and Optical Analysis of Ag Nanoparticles assisted Vertically Aligned TiO2 Nanowires based photoanode for Dye-sensitized Solar Cells Application

2021 ◽  
Author(s):  
Biraj Shougaijam ◽  
Salam Surjit Singh
Keyword(s):  
Solar Cells ◽  
Ag Nanoparticles ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Ag Nps ◽  
Dye Sensitized ◽  
Vertically Aligned ◽  
Glad Technique ◽  
Sensitized Solar Cells ◽  
Pet Substrate

Abstract In this work, vertically aligned TiO 2 -Nanowires (TiO 2 -NWs) and Ag Nanoparticles assisted TiO 2 Nanowires (TAT-NWs) were deposited on glass and flexible PET substrates using the Glancing Angle Deposition (GLAD) technique. The morphology and structural analysis of the samples manifest the successful deposition of vertically aligned TiO 2 -NWs and TAT-NWs. The HR-TEM image of TiO 2 -NWs shows the polycrystalline nature. Further, the XRD result confirms the polycrystalline nature of both the TiO 2 -NWs and TAT-NWs samples. Besides, the HR-TEM image confirms the presence of small crystal grains of Ag Nanoparticles (Ag-NPs) at the mid of the annealed TAT-NWs. It is evident from the Selective Area Electron Diffraction (SAED) analysis of the TiO 2 -NWs and annealed TAT-NWs that the crystallinity of TiO 2 present in the annealed TAT-NWs improves after annealing. The absorption spectrum analysis of TAT-NWs deposited on glass substrate shows enhance absorption peak in the visible region with a maximum peak at ~463 nm wavelength compare to the TiO 2 -NWs, which may be attributed to the Surface Plasmon Resonance (SPR) effect of Ag-NPs. Further, it is interesting to observe that the TAT-NWs deposited on PET substrate show further absorption enhancement in the UV and visible region. In addition, the Photoluminescence analysis reveals that the bandgap of the TiO 2 -NWs is ~3.12 eV, which supports the bandgap extracted from the Tauc plot. Therefore, the proposed method of fabricating TAT-NWs on glass and flexible ITO coated PET substrate using the GLAD technique may be applicable for developing novel photoanode for Dye-sensitized Solar Cells (DSSCs) and other optoelectronic applications.

scholarly journals A SYNERGISTIC ABSORPTION AND PLASMONIC EFFECT OF SiO2@Au@TiO2 IN TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELLS

2021 ◽  
Vol 22 (2) ◽  
pp. 53
Author(s):  
Matius Nata Pakpahan ◽  
Aldi Hartanto ◽  
Yonatan Davidson Gultom ◽  
Nur Fadhilah ◽  
Doty Dewi Risanti
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Pure Tio2 ◽  
Plasmonic Nanostructures ◽  
Plasmonic Effect ◽  
Tio2 Anatase ◽  
Dye Sensitized ◽  
The Core ◽  
Sensitized Solar Cells ◽  
Tio2 Photoanode

A SYNERGISTIC ABSORPTION AND PLASMONIC EFFECT OF SiO2@Au@TiO2 IN A TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELLS. A method for increasing the visible-light harvesting of a TiO2 anatase photoanode in dye-sensitized solar cells by incorporating plasmonic nanostructures was developed. Sidoarjo mud as the SiO2 source was used to successfully synthesized core/multishell SiO2@Au@TiO2, with varying amounts of Au (60, 90, and 120 mL). In addition, the core/multishell fractions in TiO2 paste were varied, i.e., 0.5%, 1%, and 5%. The UV–Vis spectrum shows that a more ripple spectrum at higher wavelengths is obtained with increasing Au content, as suggested by the presence of large Au nanoparticles; however, a similar value of efficiency is observed for all sample variations studied compared to a pure TiO2 photoanode. The incident photon-to-current efficiency reveals that all photoanodes containing the core/multishell SiO2@Au@TiO2 studied show somewhat broader and enhanced spectra for all studied wavelengths compared to the pure TiO2 photoanode, resulting from the synergistic effect between plasmonic nanostructures and the presence of silica that boost the absorption to higher wavelengths.

Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)

2021 ◽  
Vol 1016 ◽  
pp. 863-868
Author(s):  
Tika Erna Putri ◽  
Yuan Hao ◽  
Fadzai Lesley Chawarambwa ◽  
Hyunwoong Seo ◽  
Min Kyu Son ◽  
...  
Keyword(s):  
Solar Cells ◽  
Activated Carbon ◽  
Counter Electrode ◽  
Low Cost ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Optical Losses ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The losses of solar cells are consisted of electrical losses and optical losses. Optical losses chiefly reduce the short-circuit current. Here we apply bifacial cell approach to increase light absorption and the short-circuit current of dye sensitized solar cells (DSSCs). We have employed activated carbon (AC) as a very low cost counter electrode, an alternative to Pt counter electrode. Addition of dimethyl sulfoxide (DMSO) and titanium carbonitride (TiCN) to AC increase the efficiency of bifacial DSSC at a mirror angle of from 5.10% to and , respectively. These results indicate that AC has the potential to replace Pt as a very low cost counter electrode of bifacial DSSCs. The bifacial DSSC system using double plane mirrors improve PCE to for Pt counter electrode at a mirror angle of , and for AC counter electrode at a mirror angle of , respectively.

Sign in / Sign up

Export Citation Format

Share Document