scholarly journals A Novel Power Electronic Inverter Circuit for Transformerless Photovoltaic Systems

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Cao Hai-Yan
Keyword(s):  
Leakage Current ◽  
Photovoltaic Systems ◽  
Power Electronic ◽  
Test Results ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Evaluation Test ◽  
Mode Characteristic ◽  
The Common ◽  
Inverter Circuit

Capacitive leakage current is one of the most important issues for transformerless photovoltaic systems. In order to deal with the capacitive leakage current, a new power electronic inverter circuit is proposed in this paper. The inverter circuit consists of six switches and operates with constant common mode voltage. Theoretical analysis is conducted to clarify the circuit operation principle and the common mode characteristic. The performance evaluation test is carried out, and test results demonstrate that the capacitive leakage current can be significantly minimized with the proposed power electronic inverter circuit.

scholarly journals Common mode behavior in grid connected DC and AC decoupled PV Inverter topologies

2016 ◽  
Vol 65 (3) ◽  
pp. 481-493 ◽  
Author(s):  
D. John Sundar ◽  
M. Senthil Kumaran
Keyword(s):  
Leakage Current ◽  
High Efficiency ◽  
Economic Feasibility ◽  
Photovoltaic Systems ◽  
Common Mode ◽  
Pv Inverter ◽  
Mode Behavior ◽  
The Common ◽  
Utility Grid ◽  
The Impact

Abstract The transformer-less grid connected inverters are gaining more popularity due to their high efficiency, very low ground leakage current and economic feasibility especially in photovoltaic systems. The major issue which surfaces these systems is that of common mode leakage current which arises due to the absence of an electrical transformer connected between the inverter and the utility grid. Several topologies have evolved to reduce the impact of common mode leakage current and a majority of them have succeeded in eliminating the impacts and have well kept them within the limits of grid standards. This paper compares and analyses the impact of the common mode leakage current for four popular inverter configurations through simulation of the topologies such as H5, H6, HERIC and FBZVR inverters.

scholarly journals A Five-Level Converter in a Three-Level Mode for Common-Mode Leakage Current Suppression in PV-Generation Systems

Electronics ◽  
2021 ◽  
Vol 10 (19) ◽  
pp. 2382
Author(s):  
Aleksey V. Udovichenko ◽  
Sergey V. Brovanov ◽  
Evgeny V. Grishanov ◽  
Svetlana M. Stennikova
Keyword(s):  
Leakage Current ◽  
Pulse Width Modulation ◽  
Renewable Energy Sources ◽  
Multilevel Converter ◽  
Generation System ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Modulation Mode ◽  
The Common ◽  
Pv Generation

Power generation systems (PGSs) based on renewable energy sources are finding ever-widening applications, and many researchers work on this problem. Many papers address the problem of transformerless PGSs, but few of them aimed at conducting research on structures with multilevel converter topologies as part of a PGS. In this paper a grid-tied transformerless PV-generation system based on a multilevel converter is discussed. There are common-mode leakage currents (CMLCs), which act as a parasitic factor. It is also known that common-mode voltage is the main cause of the common-mode leakage current in grid-tied PV-generation systems. This paper considers the space vector pulse-width modulation (PWM) technique, which is used to suppress or reduce common-mode leakage current. The proposed PWM technique with the reduction of common-mode leakage current for a generation system based on the multilevel converter controlled with a PWM technique was verified experimentally. The experimental results accurately confirmed the mathematical model and the compensation achieved without errors. In the experiment, there was an approximately six-fold decrease in the common-mode leakage current (10.3 mA in rejection mode and 61 mA in non-rejection current). This can lead to the elimination of CMLC in a multilevel semiconductor converter only by changing the modulation mode. This suggests the possibility of using these devices as part of transformerless generation systems. Suppression of CMLC can only be carried out by changing the PWM algorithm. Both considered topologies can implement this mode of operation. The proposed converter has a higher efficiency up to a frequency multiplicity of 2000.

scholarly journals Leakage Current Reduction in Single-Phase Grid-Connected Inverters—A Review

2020 ◽  
Vol 10 (7) ◽  
pp. 2384 ◽  
Author(s):  
Adyr A. Estévez-Bén ◽  
Alfredo Alvarez-Diazcomas ◽  
Gonzalo Macias-Bobadilla ◽  
Juvenal Rodríguez-Reséndiz
Keyword(s):  
Leakage Current ◽  
Harmonic Distortion ◽  
Clean Energy ◽  
Photovoltaic Module ◽  
Common Mode ◽  
Advantages And Disadvantages ◽  
Common Mode Voltage ◽  
The Common ◽  
Ac Converters ◽  
Current Reduction

The rise in renewable energy has increased the use of DC/AC converters, which transform the direct current to alternating current. These devices, generally called inverters, are mainly used as an interface between clean energy and the grid. It is estimated that 21% of the global electricity generation capacity from renewable sources is supplied by photovoltaic systems. In these systems, a transformer to ensure grid isolation is used. Nevertheless, the transformer makes the system expensive, heavy, bulky and reduces its efficiency. Therefore, transformerless schemes are used to eliminate the mentioned disadvantages. One of the main drawbacks of transformerless topologies is the presence of a leakage current between the physical earth of the grid and the parasitic capacitances of the photovoltaic module terminals. The leakage current depends on the value of the parasitic capacitances of the panel and the common-mode voltage. At the same time, the common-mode voltage depends on the modulation strategy used. Therefore, by the manipulation of the modulation technique, is accomplished a decrease in the leakage current. However, the connection standards for photovoltaic inverters establish a maximum total harmonic distortion of 5%. In this paper an analysis of the common-mode voltage and its influence on the value of the leakage current is described. The main topologies and strategies used to reduce the leakage current in transformerless schemes are summarized, highlighting advantages and disadvantages and establishing points of comparison with similar topologies. A comparative table with the most important aspects of each converter is shown based on number of components, modes of operation, type of modulation strategy used, and the leakage current value obtained. It is important to mention that analyzed topologies present a variation of the leakage current between 0 to 180 mA. Finally, the trends, problems, and researches on transformerless grid-connected PV systems are discussed.

scholarly journals Research on an Improved Single-Phase Unisolated Grid-Connected Photovoltaic Inverter

2021 ◽  
Vol 23 (2) ◽  
pp. 123-130
Author(s):  
Baoge Zhang ◽  
Deyu Hong
Keyword(s):  
Leakage Current ◽  
Single Phase ◽  
Current Problem ◽  
Input Voltage ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Voltage Clamping ◽  
The Common ◽  
Simulation Results ◽  
Inverter Topology

An improved single-phase unisolated grid-connected photovoltaic inverter topology is proposed to solve the common mode leakage current problem of unisolated grid-connected photovoltaic inverters. By analyzing the topology structure and voltage clamping principle of the improved inverter, the topology can maintain the same low input voltage as the full-bridge inverter, and ensure that the common-mode voltage in the continuation mode is clamped to the midpoint voltage of the bus, so as to effectively reduce the common-mode leakage current caused by the common-mode voltage suspension in the continuation mode. Moreover, the common-mode leakage current of the improved topology is smaller than that of the traditional H6-2D topology at similar conversion efficiency. The simulation results on MATLAB /Simulink platform show that the topology is feasible and effective.

Analytical study and simulation of a transformer-less photovoltaic grid-connected inverter with a delta-type tri-direction clamping cell for leakage current elimination

2018 ◽  
Vol 37 (2) ◽  
pp. 814-831 ◽  
Author(s):  
Tohid Jalilzadeh ◽  
Mehrdad Tarafdar Hagh ◽  
Mehran Sabahi
Keyword(s):  
Power Systems ◽  
Leakage Current ◽  
Control Method ◽  
Harmonic Distortion ◽  
Common Mode ◽  
Content Type ◽  
Low Leakage ◽  
Common Mode Voltage ◽  
Power Switches ◽  
The Common

PurposeThis paper aims to propose a new transformer-less inverter structure to reduce the common-mode leakage current in grid-connected photovoltaic (PV) systems. Design/methodology/approachThe proposed circuit structure is the same as the conventional full-bridge inverter with three additional power switches in a triangular structure. These three power switches are between the bridge and the output filter, and they mitigate the common-mode leakage current flowing toward the PV panels’ capacitors. The common-mode leakage current mitigation is done through the three-direction clamping cell (TDCC) concept. By clamping the common-mode voltage to the middle voltage of the DC-link capacitors, the leakage current and the total harmonic distortion (THD) of the injected current to the grid is effectively reduced. Therefore, the efficiency is improved. FindingsThe switching modes and the control method are introduced. A comparison is carried out between the proposed structure and other solutions in the literature. The proposed topology and its respective control method are simulated by PSCAD/EMTDC software. The simulation results validate the advantages of the presented structure such as clamping the common-mode voltage and reducing leakage current and THD of injected current to the grid. Originality/valuePresenting a single phase-improved inverter structure with low-leakage current for grid-connected PV power systems represents a significant original contribution to this work. The proposed structure can inject a sinusoidal current with low THD to the AC grid, and the power factor is unity on the AC side. In the half positive cycle, one of the switches in the TDCC is turned off under zero current. Besides, one of the other switches in TDCC is turned on with zero voltage and, therefore, its turn-on switching losses are zero. The efficiency of the proposed topology is high because of the reduction of leakage current and power losses. Accordingly, the presented topology can be a good solution to the leakage current elimination.

scholarly journals A Novel Inverter Topology for Single-Phase Transformerless PV System

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Haiyan Cao
Keyword(s):  
Leakage Current ◽  
Single Phase ◽  
High Efficiency ◽  
Low Cost ◽  
Experimental Tests ◽  
Pv System ◽  
Common Mode ◽  
Common Mode Voltage ◽  
The Common ◽  
Inverter Topology

Transformerless photovoltaic (PV) power system is very promising due to its low cost, small size, and high efficiency. One of its most important issues is how to prevent the common mode leakage current. In order to solve the problem, a new inverter is proposed in this paper. The system common mode model is established, and the four operation modes of the inverter are analyzed. It reveals that the common mode voltage can be kept constant, and consequently the leakage current can be suppressed. Finally, the experimental tests are conducted. The experimental results verify the effectiveness of the proposed solution.

scholarly journals A New Approach to the PWM Modulation for the Multiphase Matrix Converters Supplying Loads with Open-End Winding

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 466
Author(s):  
Pawel Szczepankowski ◽  
Natalia Strzelecka ◽  
Enrique Romero-Cadaval
Keyword(s):  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Simulation Software ◽  
Common Mode ◽  
New Approach ◽  
Matrix Converters ◽  
Load Voltage ◽  
Common Mode Voltage ◽  
The Common ◽  
Open End Winding

This article presents three variants of the Pulse Width Modulation (PWM) for the Double Square Multiphase type Conventional Matrix Converters (DSM-CMC) supplying loads with the open-end winding. The first variant of PWM offers the ability to obtain zero value of the common-mode voltage at the load’s terminals and applies only six switches within the modulation period. The second proposal archives for less Total Harmonic Distortion (THD) of the generated load voltage. The third variant of modulation concerns maximizing the voltage transfer ratio, minimizing the number of switching, and the common-mode voltage cancellation. The discussed modulations are based on the concept of sinusoidal voltage quadrature signals, which can be an effective alternative to the classic space-vector approach. In the proposed approach, the geometrical arrangement of basic vectors needed to synthesize output voltages is built from the less number of vectors, which is equal to the number of the matrix converter’s terminals. The PWM duty cycle computation is performed using only a second-order determinant of the voltages coordinate matrix without using trigonometric functions. A new approach to the PWM duty cycles computing and the load voltage synthesis by 5 × 5 and 12 × 12 topologies has been verified using the PSIM simulation software.

scholarly journals Opposite Triangle Carrier with SVPWM for Common-Mode Voltage Reduction in Dual Three Phase Motor Drives

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 282
Author(s):  
Seon-Ik Hwang ◽  
Jang-Mok Kim
Keyword(s):  
Electromagnetic Interference ◽  
Pulse Width Modulation ◽  
Motor Drives ◽  
Common Mode ◽  
Pwm Inverter ◽  
Common Mode Voltage ◽  
Voltage Vector ◽  
Three Phase ◽  
The Common ◽  
Zero Voltage

The common-mode voltage (CMV) generated by the switching operation of the pulse width modulation (PWM) inverter leads to bearing failure and electromagnetic interference (EMI) noises. To reduce the CMV, it is necessary to reduce the magnitude of dv/dt and change the frequency of the CMV. In this paper, the range of the CMV is reduced by using opposite triangle carrier for ABC and XYZ winding group, and the change in frequency in the CMV is reduced by equalizing the dwell time of the zero voltage vector on ABC and XYZ winding group of dual three phase motor.

scholarly journals Optimization of TSPWM for Common-Mode Voltage Reduction in Vehicular Electric Drive System

2021 ◽  
Vol 13 (1) ◽  
pp. 5
Author(s):  
Shang Jiang ◽  
Yuan Wang
Keyword(s):  
Electric Drive ◽  
Drive System ◽  
Modulation Method ◽  
Time Interval ◽  
Common Mode ◽  
Common Mode Voltage ◽  
Electric Drive System ◽  
The Common ◽  
Modulation Methods ◽  
Zero Voltage

Common-mode voltage can be reduced effectively by optimized modulation methods without increasing additional costs. However, the existing methods cannot satisfy the requirements of the vehicular electric-drive application. This paper optimizes the tri-state voltage modulation method to reduce the common-mode voltage for vehicular electric drive system applications. Firstly, the discontinuous switching issue during sector transition is analyzed. Under the limit of two switching times in one period, multiple alignments combination is proposed to address that issue. Secondly, the zero-voltage time intervals in different modulation ranges are explored. This paper proposes an unsymmetric translation method to reconstruct the voltage vector, and then the minimum zero-voltage time interval is controlled to enough value for safe switching. Finally, the proposed methods have been validated through experiments on a vehicular electric drive system. The results show that the common-mode voltage can be reduced effectively in the whole range with the optimized tri-state voltage modulation method.

Sign in / Sign up

Export Citation Format

Share Document