scholarly journals Examination of the Behavior of Gravity Quay Wall against Liquefaction under the Effect of Wall Width and Soil Improvement

2014 ◽  
Vol 2014 ◽  
pp. 1-11
Author(s):  
Ali Akbar Firoozi ◽  
Mohd Raihan Taha ◽  
S. M. Mir Moammad Hosseini ◽  
Ali Asghar Firoozi
Keyword(s):  
Constitutive Model ◽  
Soil Improvement ◽  
Excess Pore Pressure ◽  
Saturated Sand ◽  
Wall Width ◽  
Liquefiable Soil ◽  
Quay Wall ◽  
Analysis Models ◽  
Base Soil ◽  
Excess Pore

Deformation of quay walls is one of the main sources of damage to port facility while liquefaction of backfill and base soil of the wall are the main reasons for failures of quay walls. During earthquakes, the most susceptible materials for liquefaction in seashore regions are loose saturated sand. In this study, effects of enhancing the wall width and the soil improvement on the behavior of gravity quay walls are examined in order to obtain the optimum improved region. The FLAC 2D software was used for analyzing and modeling progressed models of soil and loading under difference conditions. Also, the behavior of liquefiable soil is simulated by the use of “Finn” constitutive model in the analysis models. The “Finn” constitutive model is especially created to determine liquefaction phenomena and excess pore pressure generation.

scholarly journals Sustainable Measures for Protection of Structures Against Earthquake Induced Liquefaction

2021 ◽  
Author(s):  
Gopal S. P. Madabhushi ◽  
Samy Garcia-Torres
Keyword(s):  
Soil Liquefaction ◽  
Excess Pore Pressure ◽  
Economic Losses ◽  
Element Analysis ◽  
Centrifuge Testing ◽  
Centrifuge Tests ◽  
Liquefiable Soil ◽  
Recent Earthquakes ◽  
Excess Pore Pressures ◽  
Excess Pore

AbstractSoil liquefaction can cause excessive damage to structures as witnessed in many recent earthquakes. The damage to small/medium-sized buildings can lead to excessive death toll and economic losses due to the sheer number of such buildings. Economic and sustainable methods to mitigate liquefaction damage to such buildings are therefore required. In this paper, the use of rubble brick as a material to construct earthquake drains is proposed. The efficacy of these drains to mitigate liquefaction effects was investigated, for the first time to include the effects of the foundations of a structure by using dynamic centrifuge testing. It will be shown that performance of the foundation in terms of its settlement was improved by the rubble brick drains by directly comparing them to the foundation on unimproved, liquefiable ground. The dynamic response in terms of horizontal accelerations and rotations will be compared. The dynamic centrifuge tests also yielded valuable information with regard to the excess pore pressure variation below the foundations both spatially and temporally. Differences of excess pore pressures between the improved and unimproved ground will be compared. Finally, a simplified 3D finite element analysis will be introduced that will be shown to satisfactorily capture the settlement characteristics of the foundation located on liquefiable soil with earthquake drains.

A Practical Saturated Sand Elastic-Plastic Dynamic Constitutive Model and Application

2012 ◽  
Vol 446-449 ◽  
pp. 1621-1626 ◽  
Author(s):  
Yan Mei Zhang ◽  
Dong Hua Ruan
Keyword(s):  
Constitutive Model ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Stone Columns ◽  
Saturated Sand ◽  
Multidimensional Model ◽  
Excess Pore Water Pressure ◽  
Elastic Plastic ◽  
Excess Pore

A practical saturated sand elastic-plastic dynamic constitutive model was developed on the base of Handin-Drnevich class nonlinear lag model and multidimensional model. In this model, during the calculation of loading before soil reaches yielding, unloading and inverse loading, corrected Handin-Drnevich equivalent nonlinear model was adopted; after soil yielding, based on the idea of multidimensional model, the composite hardening law which combines isotropy hardening and follow-up hardening, corrected Mohr-Coulomb yielding criterion and correlation flow principle were adopted. A fully coupled three dimension effective stress dynamic analysis procedure was developed on the base of this model. The seismic response of liquefaction foundation reinforced by stone columns was analyzed by the developed procedure. The research shows that with the diameter of stone columns increasing, the excess pore water pressure in soil between piles decreases; with the spacing of columns increasing, the excess pore water pressure increases. The influence of both is major in middle and lower level of composite foundation.

scholarly journals Study on Seismic Response in Deeply Deposited Saturated Liquefiable Soil Reinforced by Using Subarea Long-Short Gravel Piles

2021 ◽  
Vol 11 (23) ◽  
pp. 11271
Author(s):  
Junding Liu ◽  
Rongjian Li ◽  
Shibin Zhang ◽  
Weishi Bai ◽  
Ze Li
Keyword(s):  
Seismic Response ◽  
Underlying Mechanism ◽  
Dynamic Responses ◽  
Shielding Effect ◽  
Excess Pore Pressure ◽  
Reinforcement Scheme ◽  
Total Length ◽  
Liquefiable Soil ◽  
Natural Foundation ◽  
Excess Pore

To avoid large deformation, resulting from liquefaction, in inclined and deeply deposited liquefiable soil, it is necessary to design economical and reasonable reinforcement schemes. A reinforcement scheme employing subarea long-short gravel piles was proposed, and it was successfully applied in the embankment construction of the Aksu-kashgar highway. To reveal its underlying mechanism and effect on the seismic performance of the highway, the dynamic responses of natural foundation and two kinds of reinforced foundations were analyzed and compared under this scheme, using the program FEMEPDYN. Results showed that both the seismic subsidence and the excess pore pressure ratios were far less in the foundation reinforced with isometric gravel piles and in the foundation reinforced with subarea long-short gravel piles, compared with that in natural foundation. Therefore, the potential hazards of liquefaction were overcome in these two kinds of reinforced foundations. Furthermore, it was obvious that the shielding region only formed within the foundation reinforced with subarea long-short gravel piles. With the shielding effect, the proposed reinforcement scheme employing subarea long-short gravel piles not only eliminated liquefaction in deeply deposited liquefiable soil, but it also demonstrated an outstanding advantage in that the total length of gravel piles used was greatly reduced compared to the total length in the isometric gravel piles scheme and the interphase long-short gravel piles.

scholarly journals Effect of Deep Mixing Grid Spacing On The Settlement of Liquefied Soil, Using Numerical Approach

2022 ◽  
Author(s):  
Fereshteh Rahmani ◽  
Seyed Mahdi Hosseini
Keyword(s):  
Pore Pressure ◽  
Ground Improvement ◽  
Pressure Ratio ◽  
Soil Layer ◽  
Excess Pore Pressure ◽  
Analysis Model ◽  
Liquefaction Mitigation ◽  
Deep Mixing ◽  
Liquefiable Soil ◽  
Excess Pore

Abstract Liquefaction occurs in a loose and saturated sand layer, induces quite large damages to infrastructures, the importance of liquefaction mitigation has been emphasized to minimize earthquake disasters for many years. Many kinds of ground improvement techniques based on various improvement principles have been developed for liquefaction mitigation. Among them, deep mixing method with grid pattern was developed for liquefaction mitigation in the 1990s, where the grid of stabilized column walls functions to restrict the generation of excess pore pressure by confining the soil particle movement during earthquake. In this study, a parametric study of the grid-form deep mixing wall is performed using numerical modeling with GID+OpenSees interface V2.6.0. The finite element method with a three-dimensional analysis model can be used to estimate the foundation settlement over liquefiable soil layer. The validity of the developed model was evaluated by comparing the results obtained from the model with the results of numerical studies and the experimental centrifuge test to investigate the effect of deep mixing grid wall on the settlement and generation of excess pore pressure ratio of liquefiable soil. Based on the analysis, the settlement for improved soil was 69% smaller than the settlement for unimproved soil. The results also indicated that the grid wall space, relative density, and stiffness ratio between soil-cement columns and enclosed soil plays an important role in the occurrence of liquefaction and volumetric strains.

Excess Pore Pressures Around Underground Structures Following Earthquake Induced Liquefaction

2012 ◽  
Vol 3 (2) ◽  
pp. 25-41 ◽  
Author(s):  
Siau Chen Chian ◽  
Santana Phani Gopal Madabhushi
Keyword(s):  
Pore Pressure ◽  
Underground Structure ◽  
Unit Weight ◽  
Excess Pore Pressure ◽  
Earthquake Loading ◽  
Underground Structures ◽  
Floating Structure ◽  
Centrifuge Tests ◽  
Liquefiable Soil ◽  
Excess Pore

Underground structures located in liquefiable soil deposits are susceptible to floatation following an earthquake event due to their lower unit weight relative to the surrounding saturated soil. This inherent buoyancy may cause lightweight structures to float when the soil liquefies. Centrifuge tests have been carried out to study the excess pore pressure generation and dissipation in liquefiable soils. In these tests, near full liquefaction conditions were attained within a few cycles of the earthquake loading. In the case of high hydraulic conductivity sands, significant dissipation could take place even during the earthquake loading which inhibits full liquefaction from occurring. In the case of excess pore pressure generation and dissipation around a floating structure, the cyclic response of the structure may lead to the reduction in excess pore pressure near the face of the structure as compared to the far field. This reduction in excess pore pressure is due to shear-induced dilation and suction pressures arising from extensile stresses at the soil-structure interface. Given the lower excess pore pressure around the structure; the soil around the structure retains a portion of this shear strength which in turn can discourage significant uplift of the underground structure.

scholarly journals Nonlinear Dynamic Analysis Adopting Effective Stress Approach of an Embankment Involving Liquefaction Potential

2020 ◽  
Vol 156 ◽  
pp. 02018
Author(s):  
I Wayan Sengara ◽  
Ahmad Sulaiman
Keyword(s):  
Constitutive Model ◽  
Effective Stress ◽  
Lateral Displacement ◽  
Water Pressure ◽  
Nonlinear Dynamic Analysis ◽  
Excess Pore Pressure ◽  
Earthquake Loads ◽  
Analysis And Design ◽  
Embankment Height ◽  
Excess Pore

Stability of an embankment under earthquake loads is challenging in the process of analysis and design. Some embankment design consist of saturated granular material that is potential to liquefaction. Earthquake loads to the embankment under this conditions is one of major cause of embankment failure. Seismic performance involving stress-deformations and excess-pore-water pressure was evaluated in this paper. The evaluation adopts effective stress approach with non-linear elasto-plastic constitutive model. Numerical simulations through parametric studies were performed to estimate minimum density and embankment height efficiently to tolerate lateral displacements due to liquefaction. A number of parametric analyses were performed to investigate the relationships among relative densities of sand, ground accelerations, embankment height to excess-pore-pressure and lateral displacement of the embankment. The liquefaction analysis is conducted numerically using a finite difference method FLAC Dynamic 2D software adopting Finn-Byrne constitutive model.

Vibro-Stone Column Reinforcement Mechanism and Numerical Analysis

2012 ◽  
Vol 446-449 ◽  
pp. 1940-1943
Author(s):  
Yang Liu ◽  
Hong Xiang Yan
Keyword(s):  
Numerical Simulation ◽  
Numerical Analysis ◽  
Pore Pressure ◽  
Numerical Procedure ◽  
Numerical Results ◽  
Excess Pore Pressure ◽  
Stone Column ◽  
Reinforcement Mechanism ◽  
Consolidation Theory ◽  
Excess Pore

Numerical simulation of vibro-stone column is taken to simulate the installation of vibro-stone column. A relationship based on test is adopted to calculate the excess pore pressure induced by vibratory energy during the installation of vibro-stone column. A numerical procedure is developed based on the formula and Terzaghi-Renduric consolidation theory. Finally numerical results of composite stone column are compared single stone column.

Sign in / Sign up

Export Citation Format

Share Document