scholarly journals Compact Dual-Band Dipole Antenna with Asymmetric Arms for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Chung-Hsiu Chiu ◽  
Chun-Cheng Lin ◽  
Chih-Yu Huang ◽  
Tsai-Ku Lin
Keyword(s):  
Wireless Communication ◽  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dipole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Compact Size ◽  
Communication Devices

A dual-band dipole antenna that consists of a horn- and a C-shaped metallic arm is presented. Depending on the asymmetric arms, the antenna provides two −10 dB impedance bandwidths of 225 MHz (about 9.2% at 2.45 GHz) and 1190 MHz (about 21.6% at 5.5 GHz), respectively. This feature enables it to cover the required bandwidths for wireless local area network (WLAN) operation at the 2.4 GHz band and 5.2/5.8 GHz bands for IEEE 802.11 a/b/g standards. More importantly, the compact size (7 mm × 24 mm) and good radiating performance of the antenna are profitable to be integrated with wireless communication devices on restricted RF-elements spaces.

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals A CPW-Fed Rectangular Ring Monopole Antenna for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Sangjin Jo ◽  
Hyunjin Choi ◽  
Beomsoo Shin ◽  
Sangyeol Oh ◽  
Jaehoon Lee
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Feed Line ◽  
Compact Size

We present a simple coplanar waveguide- (CPW-) fed rectangular ring monopole antenna designed for dual-band wireless local area network (WLAN) applications. The antenna is based on a simple structure composed of a CPW feed line and a rectangular ring. Dual-band WLAN operation can be achieved by controlling the distance between the rectangular ring and the ground plane of the CPW feed line, as well as the horizontal vertical lengths of the rectangular ring. Simulated and measured data show that the antenna has a compact size of21.4×59.4 mm2, an impedance bandwidths of 2.21–2.70 GHz and 5.04–6.03 GHz, and a reflection coefficient of less than −10 dB. The antenna also exhibits an almost omnidirectional radiation pattern. This simple compact antenna with favorable frequency characteristics therefore is attractive for applications in dual-band WLAN.

scholarly journals Design of UWB Monopole Antenna with Dual Notched Bands Using One Modified Electromagnetic-Bandgap Structure

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Hao Liu ◽  
Ziqiang Xu
Keyword(s):  
Simple Structure ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Dual Band ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Compact Size

A modified electromagnetic-bandgap (M-EBG) structure and its application to planar monopole ultra-wideband (UWB) antenna are presented. The proposed M-EBG which comprises two strip patch and an edge-located via can perform dual notched bands. By properly designing and placing strip patch near the feedline, the proposed M-EBG not only possesses a simple structure and compact size but also exhibits good band rejection. Moreover, it is easy to tune the dual notched bands by altering the dimensions of the M-EBG. A demonstration antenna with dual band-notched characteristics is designed and fabricated to validate the proposed method. The results show that the proposed antenna can satisfy the requirements of VSWR < 2 over UWB 3.1–10.6 GHz, except for the rejected bands of the world interoperability for microwave access (WiMAX) and the wireless local area network (WLAN) at 3.5 GHz and 5.5 GHz, respectively.

Dual-Band Flexible Antenna for WLAN/WiMAX Applications

2019 ◽  
Vol 09 ◽  
Author(s):  
Poonam Thanki ◽  
Falguni Raval
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Flexible Substrate ◽  
Ground Plane ◽  
Local Area ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size ◽  
Flexible Antenna

Aims: This paper presents the development of Co-Planar Waveguide (CPW) fed dualband, compact, and flexible antenna. The antenna is designed on flexible substrate jeans; so, it is suitable for wearable applications. <p></p> Objectives: The proposed antenna generates dual-band at 3.36GHz –3.61GHz and at 5.01 GHz – 5.18 GHz. The antenna has a compact size of 40×30 mm2. The antenna consists of a rectangular patch having a slot which is responsible for the first band and slot in the ground plane which is responsible for the second band. <p></p> Methods: By optimizing the dimensions, the antenna gives dual-band at 3.5 GHz and 5.1 GHz with impedance bandwidth of 250 MHz and 170 MHz, respectively. The performance of the antenna such as gain and radiation pattern over the operating band has been also discussed. <p></p> Conclusion: This proposed antenna with the first band at 3.5GHz is suitable for Wi-MAX (Worldwide Interoperability for Microwave Access) and second band at 5.1GHz is suitable for Higher Wireless Local Area Network applications (WLAN). <p></p>

scholarly journals A Single-Fed Multiband Antenna for WLAN and 5G Applications

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6332
Author(s):  
Zakir Khan ◽  
Muhammad Hunain Memon ◽  
Saeed Ur Rahman ◽  
Muhammad Sajjad ◽  
Fujiang Lin ◽  
...  
Keyword(s):  
Millimeter Wave ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Experimental Results ◽  
Area Network ◽  
Multiband Antenna ◽  
Large Bandwidth ◽  
Compact Size ◽  
Communication Devices

In this paper, a slotted conical patch connected to a small triangular patch multiband antenna for both microwave and millimeter-wave applications is presented. The designed antenna has three characteristics. The proposed antenna is a multiband, having a compact size of 0.35λ0 × 0.35λ0 × 0.004λ0 at its lowest operational frequency, i.e., 2.4 GHz, and more importantly, it can cover both the microwave and millimeter-wave bands with a single feeding. According to the −10 dB matching bandwidth, experimental results show that the antenna operates at (2.450–2.495) GHz, (5.0–6.3) GHz, and (23–28) GHz. The reduced size, simple design, and multiband large bandwidth are some of the advantages over the reported designs in the latest literature. Both simulated and experimental results show a good agreement, and the proposed antenna can be used for wireless local area network (WLAN) applications and fifth-generation (5G) wireless communication devices.

scholarly journals Design and Analysis of a Compact UWB Band Notch Antenna for Wireless Communication

2020 ◽  
Vol 3 (1) ◽  
pp. 6
Author(s):  
Mohammad Monirujjaman Khan
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Ultra Wideband ◽  
Wireless Communication Systems ◽  
Area Network ◽  
Compact Size ◽  
Simulation Based

Development and investigation of a miniaturized ultra-wideband band notch antenna is demonstrated in this paper. The antenna was modeled and simulated using Computer Simulation Technology (CST)TM Microwave Studio software. The simulated results of this antenna are presented and analyzed. The performance parameters such as return loss, gain, radiation efficiency, radiation patterns are simulation-based results provided here. The main objective of this paper was to obtain band notch characteristics at the Wireless Local Area Network (5.15–5.8 GHz) and WiMax (5.25–5.85 GHz) in the UWB frequency ranges of 3.1–10.6 GHz in order to avoid interference. Results and analysis show that the antenna meets the objective and shows very good results. It has very compact size as well which is attractive feature of this antenna that will make it suitable for ultra-wideband wireless communication systems.

IEEE 802.11 Tutorial

2018 ◽  
Author(s):  
Kiramat
Keyword(s):  
Access Control ◽  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Physical Layer ◽  
Media Access Control ◽  
Area Network ◽  
Media Access ◽  
Computer Communications

IEEE 802.11 is a set of media access control (MAC) and physical layer (PHY) specifications for implementing wireless local area network (WLAN) computer communications. Maintained by the Institute of Electrical and Electronics Engineers (IEEE) LAN/MAN Standards Committee (IEEE 802). This document highlights the main features of IEEE 802.11n variant such as MIMO, frame aggregation and beamforming along with the problems in this variant and their solutions

Sign in / Sign up

Export Citation Format

Share Document