Dipole antenna with folded branch lines for wireless local area network dual band and phase reversal operation

2011 ◽  
Vol 53 (11) ◽  
pp. 2449-2451
Author(s):  
Jinwoo Jung ◽  
Hyeonjin Lee ◽  
Yeongseog Lim
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dipole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Phase Reversal

scholarly journals Compact Dual-Band Dipole Antenna with Asymmetric Arms for WLAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Chung-Hsiu Chiu ◽  
Chun-Cheng Lin ◽  
Chih-Yu Huang ◽  
Tsai-Ku Lin
Keyword(s):  
Wireless Communication ◽  
Ieee 802.11 ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dipole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Compact Size ◽  
Communication Devices

A dual-band dipole antenna that consists of a horn- and a C-shaped metallic arm is presented. Depending on the asymmetric arms, the antenna provides two −10 dB impedance bandwidths of 225 MHz (about 9.2% at 2.45 GHz) and 1190 MHz (about 21.6% at 5.5 GHz), respectively. This feature enables it to cover the required bandwidths for wireless local area network (WLAN) operation at the 2.4 GHz band and 5.2/5.8 GHz bands for IEEE 802.11 a/b/g standards. More importantly, the compact size (7 mm × 24 mm) and good radiating performance of the antenna are profitable to be integrated with wireless communication devices on restricted RF-elements spaces.

Analysis of electromagnetic absorption in new design of PIFA antenna using metamaterials

2021 ◽  
Author(s):  
Hamza Ben Hamadi ◽  
said ghnimi ◽  
Lassaad Latrach ◽  
Philippe Benech ◽  
Ali Gharsallah
Keyword(s):  
Human Body ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Dual Band Antenna ◽  
Cubic Model ◽  
The Impact ◽  
Pifa Antenna

Abstract This paper presents the design, simulation and fabrication of a miniaturized wearable dual-band antenna on a semi-flex substrate; she is operable at 2.45/5.8 GHz for wireless local area network applications. The electrical and radiation characteristics of this proposed antenna were obtained by means of a technical of insertion of a slot to tune the operating frequencies. To study the impact of the electromagnetic radiation of the structure of the human body, it is necessary to minimize the back radiation towards the user. Therefore, in this work, a multi-band artificial magnetic conductor (AMC) was placed directly above a dual-band planar inverted F antenna to achieve a miniaturization with excellent radiation performance. The simulation results were designed and simulated using Studio commercial software (CST). A good agreement was achieved between the results of simulation and the experimental. The Comparison of measurement results indicates that the gain improved from 1,84 dB to 3,8 dB, in the lower band, and from 2,4 dB to 4,1 in the upper band, when the antenna is backed by the AMC plane. The front-to-back ratio of the AMC backed PIFA antenna was also enhanced. Then, to ensure that the proposed AMC is harmless to the human body, this prototype was placed on three-layer human tissue cubic model. It was observed that the through inclusion of plane AMC, the peak specific absorption rate (SAR) decreased to 1,45 and 1,1 W/kg at 2,45 and 5.8 GHz, respectively (a reduction of around 3,7 W/kg, compared with an antenna without (AMC).

Design and analysis of a metamaterial inspired dual band antenna for WLAN application

2019 ◽  
Vol 11 (4) ◽  
pp. 351-358 ◽  
Author(s):  
Priyanka Garg ◽  
Priyanka Jain
Keyword(s):  
Reflection Coefficient ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Coplanar Waveguide ◽  
Local Area ◽  
Dual Band ◽  
Band Spectrum ◽  
Area Network ◽  
Dual Band Antenna ◽  
Compact Size

AbstractIn this paper, a compact, low-profile, coplanar waveguide-fed metamaterial inspired dual-band microstrip antenna is presented for Wireless Local Area Network (WLAN) application. To achieve the goal a triangular split ring resonator is used along with an open-ended stub. The proposed antenna has a compact size of 20 × 24 mm2 fabricated on an FR-4 epoxy substrate with dielectric constant (εr) 4.4. The antenna provides two distinct bands I from 2.40 to 2.48 GHz and II from 4.7 to 6.04 GHz with reflection coefficient better than −10 dB, covering the entire WLAN (2.4/5.2/5.8 GHz) band spectrum. The performance of the proposed metamaterial inspired antenna is also studied in terms of the radiation pattern, efficiency, and the realized gain. A comparative study is also presented to show the performance of the proposed metamaterial inspired antenna with respect to other conventional antenna structures in terms of overall size, bandwidth, gain, and reflection coefficient. Finally, the antenna is fabricated and tested. The simulated results show good agreement with the measured results.

scholarly journals Compact Dual-Band Planar Inverted-e-Shaped Antenna Using Defected Ground Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wen Piao Lin ◽  
Dong-Hua Yang ◽  
Zong-De Lin
Keyword(s):  
Printed Circuit Board ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Impedance Matching ◽  
Local Area ◽  
Circuit Board ◽  
Dual Band ◽  
Area Network ◽  
Defected Ground Structure ◽  
Ground Structure

This paper presents a novel dual-band planar inverted-e-shaped antenna (PIEA) using defected ground structure (DGS) for Bluetooth and wireless local area network (WLAN) applications. The PIEA can reduce electromagnetic interferences (EMIs) and it is constructed on a compact printed circuit board (PCB) size of 10 × 5 × 4 mm3. Experimental results indicate that the antenna with a compact meandered slit can improve the operating impedance matching and bandwidths at 2.4 and 5.5 GHz. The measured power gains at 2.4 and 5.5 GHz band are 1.99 and 3.71 dBi; antenna efficiencies are about 49.33% and 55.23%, respectively. Finally, the good performances of the proposed antenna can highly promote for mobile device applications.

Sign in / Sign up

Export Citation Format

Share Document