scholarly journals Development and Validation of an Enhanced Coupled-Field Model for PZT Cantilever Bimorph Energy Harvester

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zhengchao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

The power source with the limited life span has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means of converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, two previous models in the literatures for predicting the open-circuit and close-circuit voltages of a piezoelectric cantilever bimorph (PCB) energy harvester are first described, that is, the mechanical equivalent spring mass-damper model and the electrical equivalent circuit model. Then, the development of an enhanced coupled field model for the PCB energy harvester based on another previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit and close-circuit voltages of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy-harvesting level of the system.

Enhanced Coupled Field Modeling of PZT Cantilever Bimorph Energy Harvester

2011 ◽  
Vol 145 ◽  
pp. 21-26
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zheng Chao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Consumer Electronics ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

As consumer electronics continue to develop in size and scope, the battery power source with the limited life span poses an increasing economic challenge. This growing problem has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy for use of the wireless sensor nodes and the portable electronics. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means for converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, the development of an enhanced coupled field model for the PCB energy harvester based on a previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy harvesting level of the system.

Performance analysis of a lever piezoelectric energy harvester for roadway applications

2021 ◽  
pp. 1045389X2110014
Author(s):  
Guangya Ding ◽  
Hongjun Luo ◽  
Jun Wang ◽  
Guohui Yuan
Keyword(s):  
Output Power ◽  
Energy Harvester ◽  
Open Circuit ◽  
Traffic Load ◽  
Energy Harvesters ◽  
Speed Sensor ◽  
Piezoelectric Energy ◽  
Optimal Load ◽  
Self Powered ◽  
Output Characteristics

A novel lever piezoelectric energy harvester (LPEH) was designed for installation in an actual roadway for energy harvesting. The model incorporates a lever module that amplifies the applied traffic load and transmits it to the piezoelectric ceramic. To observe the piezoelectric growth benefits of the optimized LPEH structure, the output characteristics and durability of two energy harvesters, the LPEH and a piezoelectric energy harvester (PEH) without a lever, were measured and compared by carrying out piezoelectric performance tests and traffic model experiments. Under the same loading condition, the open circuit voltages of the LPEH and PEH were 20.6 and 11.7 V, respectively, which represents a 76% voltage increase for the LPEH compared to the PEH. The output power of the LPEH was 21.51 mW at the optimal load, which was three times higher than that of the PEH (7.45 mW). The output power was linearly dependent on frequency and load, implying the potential application of the module as a self-powered speed sensor. When tested during 300,000 loading cycles, the LPEH still exhibited stable structural performance and durability.

Modeling and optimization of a wide-band piezoelectric energy harvester for smart building structures

2020 ◽  
Vol 11 (02) ◽  
pp. 2050009
Author(s):  
Prateek Asthana ◽  
Gargi Khanna
Keyword(s):  
Resonant Frequency ◽  
Energy Harvester ◽  
Proof Mass ◽  
Mechanical Energy ◽  
Wide Band ◽  
Electrical Energy ◽  
Sensor Nodes ◽  
Ambient Vibrations ◽  
Band Energy ◽  
Piezoelectric Energy

Piezoelectric energy harvesting refers to conversion of mechanical energy into usable electrical energy. In the modern connected world, wireless sensor nodes are scattered around the environment. These nodes are powered by batteries. Batteries require regular replacement, hence energy harvesters providing continuous autonomous power are used to power these sensor nodes. This work provides two different fixation modes for the resonant frequency for the two modes. Variation in geometric parameter and their effect on resonant frequency and output power have been analyzed. These harvesters capture a wide-band of ambient vibrations and convert them into usable electrical energy. To capture random ambient vibrations, the harvester used is a wide-band energy harvester based on conventional seesaw mechanism. The proposed structure operates on first two resonant frequencies in comparison to the conventional cantilever system working on first resonant frequency. Resonance frequency, as well as response to a varying input vibration frequency, is carried out, showing better performance of seesaw cantilever design. In this work, modeling of wide-band energy harvester with proof mass is being performed. Position of proof mass plays a key role in determining the resonant frequency of the harvester. Placing the proof mass near or away from fixed end results in increase and decrease in stress on the piezoelectric layer. Hence, to avoid the breaking of cantilever, the position of proof mass has been analyzed.

A Novel Multi-Directional Nonlinear Piezoelectric Energy Harvester Coupled With Nonlinear Conditioning Circuits

2015 ◽  
Author(s):  
Zhengbao Yang ◽  
Jean Zu
Keyword(s):  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Electrical Energy ◽  
Elastic Rods ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
High Power Output ◽  
Transduction Mechanisms ◽  
Self Powered ◽  
Aluminum Plates

Energy harvesting from vibrations has become, in recent years, a recurring target of a quantity of research to achieve self-powered operation of low-power electronic devices. However, most of energy harvesters developed to date, regardless of different transduction mechanisms and various structures, are designed to capture vibration energy from single predetermined direction. To overcome the problem of the unidirectional sensitivity, we proposed a novel multi-directional nonlinear energy harvester using piezoelectric materials. The harvester consists of a flexural center (one PZT plate sandwiched by two bow-shaped aluminum plates) and a pair of elastic rods. Base vibration is amplified and transferred to the flexural center by the elastic rods and then converted to electrical energy via the piezoelectric effect. A prototype was fabricated and experimentally compared with traditional cantilevered piezoelectric energy harvester. Following that, a nonlinear conditioning circuit (self-powered SSHI) was analyzed and adopted to improve the performance. Experimental results shows that the proposed energy harvester has the capability of generating power constantly when the excitation direction is changed in 360. It also exhibits a wide frequency bandwidth and a high power output which is further improved by the nonlinear circuit.

Multiple Resonances Piezoelectric Energy Harvesting Generator

2009 ◽  
Author(s):  
Shaofan Qi ◽  
Roger Shuttleworth ◽  
S. Olutunde Oyadiji
Keyword(s):  
Energy Harvesting ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Limited Bandwidth ◽  
Piezo Element ◽  
Piezoelectric Energy ◽  
Wide Range ◽  
Environmental Vibration ◽  
Design And Testing

Energy harvesting is the process of converting low level ambient energy into usable electrical energy, so that remote electronic instruments can be powered without the need for batteries or other supplies. Piezoelectric material has the ability to convert mechanical energy into electrical energy, and cantilever type harvesters using this material are being intensely investigated. The typical single cantilever energy harvester design has a limited bandwidth, and is restricted in ability for converting environmental vibration occurring over a wide range of frequencies. A multiple cantilever piezoelectric generator that works over a range of frequencies, yet has only one Piezo element, is being investigated. The design and testing of this novel harvester is described.

Energy Harvesting Characteristics of Conical Shells

2011 ◽  
Author(s):  
H. Li ◽  
S. D. Hu ◽  
H. S. Tzou
Keyword(s):  
Energy Harvesting ◽  
Conical Shell ◽  
Energy Harvester ◽  
Electric Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Ambient Vibration ◽  
Circular Membrane ◽  
Shell Surface ◽  
Piezoelectric Energy

Piezoelectric energy harvesting has experienced significant growth over the past few years. Various harvesting structures have been proposed to convert ambient vibration energies to electrical energy. However, these harvester’s base structures are mostly beams and some plates. Shells have great potential to harvest more energy. This study aims to evaluate a piezoelectric coupled conical shell based energy harvester system. Piezoelectric patches are laminated on the conical shell surface to convert vibration energy to electric energy. An open-circuit output voltage of the conical energy harvester is derived based on the thin-shell theory and the Donnel-Mushtari-Valsov theory. The open-circuit voltage and its derived energy consists of four components respectively resulting from the meridional and circular membrane strains, as well as the meridional and circular bending strains. Reducing the surface of the harvester to infinite small gives the spatial energy distribution on the shell surface. Then, the distributed modal energy harvesting characteristics of the proposed PVDF/conical shell harvester are evaluated in case studies. The results show that, for each mode with unit modal amplitude, the distribution depends on the mode shape, harvester location, and geometric parameters. The regions with high strain outputs yield higher modal energies. Accordingly, optimal locations for the PVDF harvester can be defined. Also, when modal amplitudes are specified, the overall energy of the conical shell harvester can be calculated.

Electrical Energy Harvesting Using a Mechanical Rectification Approach

Aerospace ◽  
2006 ◽  
Author(s):  
R. M. Tieck ◽  
G. P. Carman ◽  
D. G. Enoch Lee
Keyword(s):  
Energy Density ◽  
Energy Harvesting ◽  
Power Density ◽  
Energy Harvester ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
New Approach ◽  
Piezoelectric Energy ◽  
Power Densities ◽  
Frequency Rectification

This paper presents a new approach using frequency rectification to harvest electrical energy from mechanical energy using piezoelectric devices. The rectification approach utilizes a linearly traveling Rectifier to impart vibrational motion to a cantilever piezoelectric bimorph. A conventional cantilever-type energy harvester is tested aside the rectified beam. The Standard beam generated 0.11 W of power, a power density of 15.63 kW/m3, and an energy density of 130.7 J/m3. The Rectified beam generated 580 mW of power, a power density of 871.92 kW/m3, and an energy density of 313.15 J/m3, a factor 2.4 greater than conventional energy harvesting methods. These results confirm the original thesis that a mechanically rectified piezoelectric Energy Harvester would generate larger Energy and Power Densities as well as Specific Powers, compared to conventional technologies.

scholarly journals Development of Piezoelectric Energy Harvester System through Optimizing Multiple Structural Parameters

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2876
Author(s):  
Hailu Yang ◽  
Ya Wei ◽  
Weidong Zhang ◽  
Yibo Ai ◽  
Zhoujing Ye ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Energy Harvester ◽  
Structural Parameters ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Cross Sectional ◽  
Accelerated Pavement Testing ◽  
Piezoelectric Energy ◽  
Pavement Testing

Road power generation technology is of significance for constructing smart roads. With a high electromechanical conversion rate and high bearing capacity, the stack piezoelectric transducer is one of the most used structures in road energy harvesting to convert mechanical energy into electrical energy. To further improve the energy generation efficiency of this type of piezoelectric energy harvester (PEH), this study theoretically and experimentally investigated the influences of connection mode, number of stack layers, ratio of height to cross-sectional area and number of units on the power generation performance. Two types of PEHs were designed and verified using a laboratory accelerated pavement testing system. The findings of this study can guide the structural optimization of PEHs to meet different purposes of sensing or energy harvesting.

scholarly journals Design and Experimental Study of an L Shape Piezoelectric Energy Harvester

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
In-Ho Kim ◽  
Seon-Jun Jang ◽  
Hyung-Jo Jung
Keyword(s):  
Output Voltage ◽  
Energy Harvester ◽  
Performance Enhancement ◽  
Mechanical Strain ◽  
Electrical Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Cantilevered Beam ◽  
Beam Type ◽  
Low Efficiency

Piezoelectric energy harvesters of cantilevered beam type are studied in various fields due to simplicity. In general, these systems obtain electrical energy from mechanical strain by bending of cantilevered beam. However, conventional systems have disadvantages that they have low efficiency in frequency regions other than resonance frequency. To overcome the limitations, various energy harvesters to apply performance enhancement strategies are proposed and investigated. In this paper, a frequency-changeable L shape energy harvester which is form connected cantilever beam and rigid arm is proposed and investigated. The conventional piezoelectric energy harvester exhibits the principal frequency in the simple bending mode whereas the proposed system features the twisting mode resulting in a higher output voltage than the conventional system. The proposed energy harvester is simplified to a two-degree-of-freedom model and its dynamics are described. How the length of a rigid bar affects its natural frequencies is also studied. To evaluate the performance of the system, experiments by using a vertical shaker and numerical simulation are carried out. As a result, it is shown that the natural frequency for a twisting mode decreases as the arm length increased, and the higher output voltage is generated comparing with those of the conventional energy harvester.

scholarly journals Numerical Analysis of Signal Response Characteristic of Piezoelectric Energy Harvesters Embedded in Pavement

Materials ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 2770
Author(s):  
Hailu Yang ◽  
Qian Zhao ◽  
Xueli Guo ◽  
Weidong Zhang ◽  
Pengfei Liu ◽  
...  
Keyword(s):  
Power Generation ◽  
Numerical Study ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Response Characteristic ◽  
Asphalt Pavements ◽  
Horizontal Distance ◽  
Concrete Pavements ◽  
Energy Harvesters ◽  
Piezoelectric Energy

Piezoelectric pavement energy harvesting is a technological approach to transform mechanical energy into electrical energy. When a piezoelectric energy harvester (PEH) is embedded in asphalt pavements or concrete pavements, it is subjected to traffic loads and generates electricity. The wander of the tire load and the positioning of the PEH affect the power generation; however, they were seldom comprehensively investigated until now. In this paper, a numerical study on the influence of embedding depth of the PEH and the horizontal distance between a tire load and the PEH on piezoelectric power generation is presented. The result shows that the relative position between the PEH and the load influences the voltage magnitude, and different modes of stress state change voltage polarity. Two mathematic correlations between the embedding depth, the horizontal distance, and the generated voltage were fitted based on the computational results. This study can be used to estimate the power generation efficiency, and thus offer basic information for further development to improve the practical design of PEHs in an asphalt pavement.

Sign in / Sign up

Export Citation Format

Share Document