scholarly journals Reliability of a Novel CBCT-Based 3D Classification System for Maxillary Canine Impactions in Orthodontics: The KPG Index

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Domenico Dalessandri ◽  
Marco Migliorati ◽  
Rachele Rubiano ◽  
Luca Visconti ◽  
Luca Contardo ◽  
...  

The aim of this study was to evaluate both intra- and interoperator reliability of a radiological three-dimensional classification system (KPG index) for the assessment of degree of difficulty for orthodontic treatment of maxillary canine impactions. Cone beam computed tomography (CBCT) scans of fifty impacted canines, obtained using three different scanners (NewTom, Kodak, and Planmeca), were classified using the KPG index by three independent orthodontists. Measurements were repeated one month later. Based on these two sessions, several recommendations on KPG Index scoring were elaborated. After a joint calibration session, these recommendations were explained to nine orthodontists and the two measurement sessions were repeated. There was a moderate intrarater agreement in the precalibration measurement sessions. After the calibration session, both intra- and interrater agreement were almost perfect. Indexes assessed with Kodak Dental Imaging 3D module software showed a better reliability inz-axis values, whereas indexes assessed with Planmeca Romexis software showed a better reliability inx- andy-axis values. No differences were found between the CBCT scanners used. Taken together, these findings indicate that the application of the instructions elaborated during this study improved KPG index reliability, which was nevertheless variously influenced by the use of different software for images evaluation.

2012 ◽  
Vol 83 (2) ◽  
pp. 196-203 ◽  
Author(s):  
Iury O. Castro ◽  
Ana H. G. Alencar ◽  
José Valladares-Neto ◽  
Carlos Estrela

ABSTRACT Objective: To determine the frequency of apical root resorption (ARR) due to orthodontic treatment using cone beam computed tomography (CBCT) in a sample of 1256 roots from 30 patients. Materials and Methods: All patients had Class I malocclusion with crowding. Of the 30 patients evaluated, 11 were boys and 19 were girls; their mean age was 13 years (11 to 16 years). Orthodontic treatment followed the nonextraction treatment. CBCT images were obtained before and after orthodontic treatment, and ARR was determined using Axial Guided Navigation of CBCT images. Results: All patients had ARR. No statistically significant association was found between resorption frequency, gender, and age. ARR was detected using CBCT in 46% of all roots that underwent orthodontic treatment. Conclusions: CBCT was effective for detecting in vivo even minimal degrees of ARR due to orthodontic treatment and allowed three-dimensional evaluation of dental roots and visualization of palatine roots of maxillary molars. The highest frequencies and the most significant ARR occurred in incisors and distal roots of first maxillary and mandibular molars.


2016 ◽  
Vol 1 (2) ◽  
pp. 10-13
Author(s):  
AV V Arkhipov ◽  
EA A Loginova ◽  
VD D Arkhipov

The paper presents the possibilities of the virtual planning of orthodontic treatment with programs In Vivo Anatomage and 3Shape Ortho Analyzer, which allows you to create an individual plan of orthodontic treatment. Using three-dimensional cephalometric analysis and cone-beam computed tomography eliminates the risk of complications during orthodontic tooth moving. Aim - to determine the main directions of application of three-dimensional cephalometric analysis in orthodontist’s practice Materials and methods. The study involved 20 patients aged between 18 and 35 years (women 85%, men 15%). All patients underwent cone-beam computed tomography of the facial region of the skull conducted on a tomograph with a matrix 16h10. To obtain the most objective data, a wide range of clinical and other diagnostic methods was used in the study: clinical (survey, visual examination of face and oral cavity, clinical functional tests), anthropometric (measurement of jaw models in the program 3Shape Ortho Analyzer), CBCT of the facial region of the skull and cervical part of the spine. The survey was conducted on every patient according to the developed protocol. 1. Assessment of the dental hard tissues (diagnosis of caries, pulpitis and periodontitis), periapical periodontal tissues, and the state of the cortical bone; construction of three-dimensional panoramic reconstruction to determine the parallelism of the roots and their position in the bone of the alveolar processes on the vestibular and lingual surfaces. 2. Assessment of the patency of airways. 3. Evaluation of the bone elements of the temporomandibular joint on both sides, determining the position of articular head in the glenoid fossa. 4. Three-dimensional cephalometric analysis. 5. Superimposition of the data of the facial skull computed tomography; analysis of the changes in the course of dental treatment. The results of research. The obtained CBCT of the facial skull, processed in the program In Vivo Anatomage version 5.2, allows specifying the status and location of the bony structures of the temporomandibular joint, sinuses, individual structural features of the upper and lower jaws, dental roots deep in the alveolar processes and their correlation to the cortical plate. Additional features of the program are the opportunity to study the airways, combination of the scanned plaster models in .Stl format and superimposition of one CT scan to the other to produce a report on the changes that occurred. Discussion. The computer program allows correction of congenital abnormalities of dentition, reducing the risk of complications to a minimum. Moreover, the expected result can be predicted at the initial stage of treatment. The main advantage of CBCT is the possibility to determine the exact anatomical parameters of a patient without overlapping of adjacent structures and projection distortion of the sizes of anatomical structures.


Author(s):  
Maya Genisa ◽  
Solehuddin Shuib ◽  
Zainul Ahmad Rajion ◽  
Erry Mochamad Arief ◽  
Maman Hermana

The aim of this study is to investigate the estimation of density from the Hounsfield unit of cone beam computed tomography data in dental imaging, especially for dental implant application. A jaw phantom with various known densities of anatomical parts (e.g. soft tissue, cortical bone, trabecular bone, tooth enamel, tooth dentin, sinus cavity, spinal cord and spinal disc) has been used to test the accuracy of the Hounsfield unit of cone beam computed tomography in estimating the mechanical density (true density). The Hounsfield unit of cone beam computed tomography data was evaluated via the MIMICS software using both two-dimensional and three-dimensional methods, and the results showed correlation with the true density of the object. In addition, the results revealed that the Hounsfield unit of cone beam computed tomography and bone density had a logarithmic relation, rather than a linear one. To this end, the correlation coefficient of logarithmic correlation (R2 = 0.95) is higher than the linear one (R2 = 0.77).


Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.


2020 ◽  
Vol 5 (1) ◽  
Author(s):  
Ateksha Bhardwaj Khanna

Abstract Background Endodontic disease can adversely affect the quality of life and therefore early diagnosis and consequent timely treatment is of paramount importance for the Endodontist. Radiology is an essential component in treatment planning, disease monitoring and assessment of treatment outcome. Periapical radiographs and panoramic radiography are frequently utilised but they provide only two-dimensional representation of three-dimensional structures. The advent of cone beam computed tomography (CBCT) offers three-dimensional accuracy of the hard tissue images with a reasonable cost and this has revolutionised imaging of the dentomaxillofacial structures. This imaging system has been seen to overcome some limitations of conventional radiography, as brought out in this review. The improvement in the accuracy is, however, accompanied at the cost of increased radiation exposure to the patient. Nevertheless, smaller areas of exposure are normally appropriate for endodontic imaging, and adjustment in the exposure parameters can further moderate the effective dose (Loubele et al. 37(6):309-18, 2008). Aims and objectives The aim of this review is to present the pertinent literature on the various applications of cone beam computed tomography in the field of endodontics. Methods Literature was electronically searched on the following sources; Medline and Keats Library. Further, a manual search was performed on the following journals: International Endodontic Journal, Journal of Endodontics, Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, Endodontology, Journal of Dental Research, European Journal of Oral Sciences & Odontology and Dentomaxillofacial Radiology. A preliminary search was performed to gain an idea of the available literature using keywords ‘Cone Beam Computed Tomography’ to view the volume of the literature evident and identify questions to be addressed in this review. The initial search showed 243 potential articles. After scrutinising the titles and abstracts of the retrieved articles, 70 relevant studies were reviewed in full text. Furthermore, ‘published guidelines on the use of CBCT’ were also searched so as to include the results as an additional source material. All the articles eligible to be included in the review were in the English language and ranged from the year 1960 to the present. Also all the studies reviewed were based on the various uses of cone beam computed tomography in the field of endodontics. The keywords used to search were ‘Cone Beam Computed Tomography (CBCT)’, ‘Conventional radiography’, ‘Applications of CBCT in endodontics’, ‘CBCT and tooth morphology’, ‘CBCT and apical periodontitis’, ‘CBCT and vertical root fractures’, ‘CBCT and resorption’, ‘CBCT and pre-surgical assessment’, ‘CBCT and dento-alveolar trauma’ and ‘CBCT and endodontic outcome’. Results Every case is unique and CBCT should be considered only after studying each case individually. CBCT imaging needs to be adopted or used where information from conventional imaging systems is either inadequate for the management of endodontic problems or inconclusive. Having said that, it is safe to state that CBCT imaging has the potential to become the first choice for endodontic treatment planning and outcome assessment, especially when new scanners with lower radiation doses and enhanced resolution would be available.


2011 ◽  
Vol 140 (5) ◽  
pp. 607-615 ◽  
Author(s):  
Scott Stratemann ◽  
John C. Huang ◽  
Koutaro Maki ◽  
David Hatcher ◽  
Arthur J. Miller

2008 ◽  
Vol 133 (5) ◽  
pp. 640.e1-640.e5 ◽  
Author(s):  
Maria Alves Garcia Silva ◽  
Ulrich Wolf ◽  
Frank Heinicke ◽  
Axel Bumann ◽  
Heiko Visser ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document