scholarly journals Design, Dynamics, and Workspace of a Hybrid-Driven-Based Cable Parallel Manipulator

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Bin Zi ◽  
Jianbin Cao ◽  
Zhencai Zhu ◽  
Peter Mitrouchev
Keyword(s):  
Parallel Manipulator ◽  
High Performance ◽  
Degrees Of Freedom ◽  
High Efficiency ◽  
Parallel Manipulators ◽  
Euler Method ◽  
Heavy Load ◽  
Physical Prototype ◽  
Manipulator Design ◽  
And Control

The design, dynamics, and workspace of a hybrid-driven-based cable parallel manipulator (HDCPM) are presented. The HDCPM is able to perform high efficiency, heavy load, and high-performance motion due to the advantages of both the cable parallel manipulator and the hybrid-driven planar five-bar mechanism. The design is performed according to theories of mechanism structure synthesis for cable parallel manipulators. The dynamic formulation of the HDCPM is established on the basis of Newton-Euler method. The workspace of the manipulator is analyzed additionally. As an example, a completely restrained HDCPM with 3 degrees of freedom is studied in simulation in order to verify the validity of the proposed design, workspace, and dynamic analysis. The simulation results, compared with the theoretical analysis, and the case study previously performed show that the manipulator design is reasonable and the mathematical models are correct, which provides the theoretical basis for future physical prototype and control system design.

AN INTERVAL ANALYSIS METHOD FOR WRENCH WORKSPACE DETERMINATION OF PARALLEL MANIPULATOR ARCHITECTURES

2016 ◽  
Vol 40 (2) ◽  
pp. 139-154 ◽  
Author(s):  
Joshua K. Pickard ◽  
Juan A. Carretero
Keyword(s):  
Interval Analysis ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Design Parameters ◽  
End Effector ◽  
Interval Analysis Method ◽  
Reachable Workspace ◽  
Manipulator Design

This paper deals with the wrench workspace (WW) determination of parallel manipulators. The WW is the set of end-effector poses (positions and orientations) for which the active joints are able to balance a set of external wrenches acting at the end-effector. The determination of the WW is important when selecting an appropriate manipulator design since the size and shape of the WW are dependent on the manipulator’s geometry (design) and selected actuators. Algorithms for the determination of the reachable workspace and the WW are presented. The algorithms are applicable to manipulator architectures utilizing actuators with positive and negative limits on the force/torque they can generate, as well as cable-driven parallel manipulator architectures which require nonnegative actuator limits to maintain positive cable tensions. The developed algorithms are demonstrated in case studies applied to a cable-driven parallel manipulator with 2-degrees-of-freedom and three cables and to a 3-RRR parallel manipulator. The approaches used in this paper provide guaranteed results and are based on methods utilizing interval analysis techniques for the representation of end-effector poses and design parameters.

Reconfiguration Analysis of a Variable Degrees-of-Freedom Parallel Manipulator With Both 3-DOF Planar and 4-DOF 3T1R Operation Modes

2016 ◽  
Author(s):  
Xianwen Kong
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Manipulators ◽  
Euler Parameter ◽  
Operation Modes ◽  
Moving Platform ◽  
Schönflies Motion ◽  
And Control

Reconfiguration analysis is essential for the design and control of multi-operation-mode parallel manipulators (PMs). This paper deals with the reconfiguration analysis of a variable-DOF (degrees-of-freedom) multi-operation-mode E/PPPR = PM, i.e. a PM with both 3-DOF planar operation mode and 4-DOF 3T1R (or Schönflies motion which has three translational DOF and 1 rotational DOF) operation mode. The axes of rotation of the moving platform in the 3-DOF planar operation mode are not parallel to the axes of rotation of the moving platform in the 4-DOF 3T1R operation mode. In the reconfiguration analysis, the orientation of the moving platform is represented using a Euler parameter quaternion (also Euler-Rodrigues quaternion). The reconfiguration analysis shows that the E/PPPR = PM has two 4-DOF 3T1R operation modes and two 3-DOF planar operation modes, including the two expected operation modes. The transition configurations between each pair of operation modes are also identified.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Construction of a Six-Degrees-of-Freedom Parallel Manipulator With Three Planarly Actuated Links

1996 ◽  
Author(s):  
Ronen Ben-Horin ◽  
Moshe Shoham
Keyword(s):  
Parallel Manipulator ◽  
High Performance ◽  
Degrees Of Freedom ◽  
Parallel Robot ◽  
Simple Design ◽  
Output Link ◽  
Coordinated Motion ◽  
Six Degrees Of Freedom ◽  
Work Volume ◽  
New Type

Abstract The construction of a new type of a six-degrees-of-freedom parallel robot is presented in this paper. Coordinated motion of three planar motors, connected to three fixed-length links, produces a six-degrees-of-freedom motion of an output link. Its extremely simple design along with much larger work volume make this high performance-to-simplicity ratio robot very attractive.

Dynamic Modeling of a Parallel Manipulator With Three Translational Degrees of Freedom

1998 ◽  
Author(s):  
Richard Stamper ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Close Agreement ◽  
Jacobian Matrix ◽  
Parallel Manipulators ◽  
Kinematic Structure ◽  
End Effector ◽  
Moving Platform ◽  
Euler Approach ◽  
Computationally Intensive

Abstract The dynamics of a parallel manipulator with three translational degrees of freedom are considered. Two models are developed to characterize the dynamics of the manipulator. The first is a traditional Lagrangian based model, and is presented to provide a basis of comparison for the second approach. The second model is based on a simplified Newton-Euler formulation. This method takes advantage of the kinematic structure of this type of parallel manipulator that allows the actuators to be mounted directly on the base. Accordingly, the dynamics of the manipulator is dominated by the mass of the moving platform, end-effector, and payload rather than the mass of the actuators. This paper suggests a new method to approach the dynamics of parallel manipulators that takes advantage of this characteristic. Using this method the forces that define the motion of moving platform are mapped to the actuators using the Jacobian matrix, allowing a simplified Newton-Euler approach to be applied. This second method offers the advantage of characterizing the dynamics of the manipulator nearly as well as the Lagrangian approach while being less computationally intensive. A numerical example is presented to illustrate the close agreement between the two models.

A Novel Parallel Mechanism With 3-RRUR Legs

2007 ◽  
Author(s):  
Yanwen Li ◽  
Yueyue Zhang ◽  
Lumin Wang ◽  
Zhen Huang
Keyword(s):  
Machine Tools ◽  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Symmetrical Structure ◽  
Forward Kinematic ◽  
Accumulated Error

This paper investigates a novel 4-DOF 3-RRUR parallel manipulator, the number and the characteristics of its degrees of freedom are determined firstly, the rational input plan and the invert and forward kinematic solutions are carried out then. The corresponding numeral example of the forward kinematics is given. This type of parallel manipulators has a symmetrical structure, less accumulated error, and can be used to construct virtual-axis machine tools. The analysis in this paper will play an important role in promoting the application of such manipulators.

A Measure for Evaluation of Maximum Acceleration of Redundant and Nonredundant Parallel Manipulators

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Jun Wu ◽  
Binbin Zhang ◽  
Liping Wang
Keyword(s):  
Dynamic Model ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Virtual Work ◽  
Parallel Manipulators ◽  
Maximum Acceleration ◽  
Virtual Work Principle ◽  
Joint Force ◽  
Joint Forces ◽  
Three Degrees Of Freedom

The paper deals with the evaluation of acceleration of redundant and nonredundant parallel manipulators. The dynamic model of three degrees-of-freedom (3DOF) parallel manipulator is derived by using the virtual work principle. Based on the dynamic model, a measure is proposed for the acceleration evaluation of the redundant parallel manipulator and its nonredundant counterpart. The measure is designed on the basis of the maximum acceleration of the mobile platform when one actuated joint force is unit and other actuated joint forces are less than or equal to a unit force. The measure for evaluation of acceleration can be used to evaluate the acceleration of both redundant parallel manipulators and nonredundant parallel manipulators. Furthermore, the acceleration of the 4-PSS-PU parallel manipulator and its nonredundant counterpart are compared.

Kinematic Synthesis of a Spatial 3-RPS Parallel Manipulator

2003 ◽  
Vol 125 (1) ◽  
pp. 92-97 ◽  
Author(s):  
Han Sung Kim ◽  
Lung-Wen Tsai
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Parallel Manipulators ◽  
Point Of View ◽  
Dimensional Synthesis ◽  
Kinematic Synthesis ◽  
End Effector ◽  
Solution Methods ◽  
Moving Platform ◽  
At Will

This paper presents the design of spatial 3-RPS parallel manipulators from dimensional synthesis point of view. Since a spatial 3-RPS manipulator has only 3 degrees of freedom, its end effector cannot be positioned arbitrarily in space. It is shown that at most six positions and orientations of the moving platform can be prescribed at will and, given six prescribed positions, there are at most ten RPS chains that can be used to construct up to 120 manipulators. Further, solution methods for fewer than six prescribed positions are also described.

A 2(3-RRPS) parallel manipulator inspired by Gough–Stewart platform

Robotica ◽  
2012 ◽  
Vol 31 (3) ◽  
pp. 381-388 ◽  
Author(s):  
Jaime Gallardo-Alvarado ◽  
Mario A. García-Murillo ◽  
Eduardo Castillo-Castaneda
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Forward Kinematics ◽  
Triangular Prism ◽  
Input Output ◽  
Six Degrees Of Freedom ◽  
Moving Platform

SUMMARYThis study addresses the kinematics of a six-degrees-of-freedom parallel manipulator whose moving platform is a regular triangular prism. The moving and fixed platforms are connected to each other by means of two identical parallel manipulators. Simple forward kinematics and reduced singular regions are the main benefits offered by the proposed parallel manipulator. The Input–Output equations of velocity and acceleration are systematically obtained by resorting to reciprocal-screw theory. A case study, which is verified with the aid of commercially available software, is included with the purpose to exemplify the application of the method of kinematic analysis.

Kinematics and Optimization of a Spatial 3-UPU Parallel Manipulator

1999 ◽  
Vol 122 (4) ◽  
pp. 439-446 ◽  
Author(s):  
Lung-Wen Tsai ◽  
Sameer Joshi
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Structural Characteristics ◽  
Translational Motion ◽  
Parallel Manipulators ◽  
Condition Index ◽  
Mirror Image ◽  
Geometric Conditions ◽  
Design Variables ◽  
Opposite Limb

The structural characteristics associated with parallel manipulators are investigated. Using these characteristics a class of 3 degree-of-freedom parallel manipulators are enumerated. Several parallel manipulators with only translational degrees of freedom are identified and the 3-UPU parallel manipulator is chosen for design analysis and optimization. The kinematics of this 3-UPU parallel manipulator is studied. Two geometric conditions that lead to pure translational motion of the moving platform are described. Due to the simple kinematic structure, the inverse kinematics yields two equal and opposite limb lengths whereas the direct kinematics produces two possible manipulator postures with one being the mirror image of the other. The Jacobian matrix is derived and several singular conditions are discussed. Furthermore the conditions for existence of an isotropic point within the workspace are discussed and equations to compute the isotropic configurations of a 3-UPU manipulator are derived. Finally, we undertake architecture optimization and show that certain values of design variables maximize the global condition index of the 3-UPU manipulator. [S1050-0472(00)01404-5]

Sign in / Sign up

Export Citation Format

Share Document