scholarly journals Well Screen and Optimal Time of Refracturing: A Barnett Shale Well

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Shayan Tavassoli ◽  
Wei Yu ◽  
Farzam Javadpour ◽  
Kamy Sepehrnoori
Keyword(s):  
Numerical Simulation ◽  
Shale Gas ◽  
Fracture Network ◽  
Gas Production ◽  
Sensitivity Analyses ◽  
Optimal Time ◽  
Barnett Shale ◽  
Vast Number ◽  
Access To Data ◽  
The Right

Gas-production decline in hydraulically fractured wells in shale formations necessitates refracturing. However, the vast number of wells in a field makes selection of the right well challenging. Additionally, the success of a refracturing job depends on the time to refracture a shale-gas well during its production life. In this paper we present a numerical simulation approach to development of a methodology for screening a well and to determine the optimal time of refracturing. We implemented our methodology for a well in the Barnett Shale, where we had access to data. The success of a refracturing job depends on reservoir characteristics and the initial induced fracture network. Systematic sensitivity analyses were performed so that the characteristics of a shale-gas horizontal well could be specified as to the possibility of its candidacy for a successful refracturing job. Different refracturing scenarios must be studied in detail so that the optimal design might be determined. Given the studied trends and implications for a production indicator, the optimal time for refracturing can then be suggested for the studied well. Numerical-simulation results indicate significant improvement (on the order of 30%) in estimated ultimate recovery (EUR) after refracturing, given presented screen criteria and optimal-time selection.

scholarly journals Shale gas production decline trend over time in the Barnett Shale

2018 ◽  
Vol 165 ◽  
pp. 691-710 ◽  
Author(s):  
Michael Kenomore ◽  
Mohamed Hassan ◽  
Reza Malakooti ◽  
Hom Dhakal ◽  
Amjad Shah
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Barnett Shale ◽  
Over Time

Numerical Simulation for Shale Gas Flow in Complex Fracture System of Fractured Horizontal Well

2018 ◽  
Vol 19 (3-4) ◽  
pp. 367-377 ◽  
Author(s):  
Yingzhong Yuan ◽  
Wende Yan ◽  
Fengbo Chen ◽  
Jiqiang Li ◽  
Qianhua Xiao ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Shale Gas ◽  
Horizontal Well ◽  
Fracture Network ◽  
Gas Reservoir ◽  
Complex Fracture ◽  
Shale Gas Reservoir ◽  
Fracture Parameters ◽  
Fracture Systems ◽  
Fractured Horizontal Well

AbstractComplex fracture systems including natural fractures and hydraulic fractures exist in shale gas reservoir with fractured horizontal well development. The flow of shale gas is a multi-scale flow process from microscopic nanometer pores to macroscopic large fractures. Due to the complexity of seepage mechanism and fracture parameters, it is difficult to realize fine numerical simulation for fractured horizontal wells in shale gas reservoirs. Mechanisms of adsorption–desorption on the surface of shale pores, slippage and Knudsen diffusion in the nanometer pores, Darcy and non-Darcy seepage in the matrix block and fractures are considered comprehensively in this paper. Through fine description of the complex fracture systems after horizontal well fracturing in shale gas reservoir, the problems of conventional corner point grids which are inflexible, directional, difficult to geometrically discretize arbitrarily oriented fractures are overcome. Discrete fracture network model based on unstructured perpendicular bisection grids is built in the numerical simulation. The results indicate that the discrete fracture network model can accurately describe fracture parameters including length, azimuth and density, and that the influences of fracture parameters on development effect of fractured horizontal well can be finely simulated. Cumulative production rate of shale gas is positively related to fracture half-length, fracture segments and fracture conductivity. When total fracture length is constant, fracturing effect is better if single fracture half-length or penetration ratio is relatively large and fracturing segments are moderate. Research results provide theoretical support for optimal design of fractured horizontal well in shale gas reservoir.

scholarly journals Analysis of the Influence of Different Fracture Network Structures on the Production of Shale Gas Reservoirs

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Ming Yue ◽  
Xiaohe Huang ◽  
Fanmin He ◽  
Lianzhi Yang ◽  
Weiyao Zhu ◽  
...  
Keyword(s):  
Finite Element ◽  
Shale Gas ◽  
Flow Direction ◽  
Fracture Network ◽  
Gas Production ◽  
Low Flow ◽  
Gas Reservoirs ◽  
Gas Reservoir ◽  
Shale Gas Reservoir ◽  
Gas Seepage

Volume fracturing is a key technology in developing unconventional gas reservoirs that contain nano/micron pores. Different fracture structures exert significantly different effects on shale gas production, and a fracture structure can be learned only in a later part of detection. On the basis of a multiscale gas seepage model considering diffusion, slippage, and desorption effects, a three-dimensional finite element algorithm is developed. Two finite element models for different fracture structures for a shale gas reservoir in the Sichuan Basin are established and studied under the condition of equal fracture volumes. One is a tree-like fracture, and the other is a lattice-like fracture. Their effects on the production of a fracture network structure are studied. Numerical results show that under the same condition of equal volumes, the production of the tree-like fracture is higher than that of the lattice-like fracture in the early development period because the angle between fracture branches and the flow direction plays an important role in the seepage of shale gas. In the middle and later periods, owing to a low flow rate, the production of the two structures is nearly similar. Finally, the lattice-like fracture model is regarded as an example to analyze the factors of shale properties that influence shale gas production. The analysis shows that gas production increases along with the diffusion coefficient and matrix permeability. The increase in permeability leads to a larger increase in production, but the decrease in permeability leads to a smaller decrease in production, indicating that the contribution of shale gas production is mainly fracture. The findings of this study can help better understand the influence of different shapes of fractures on the production in a shale gas reservoir.

Corrigendum to "Shale gas production decline trend over time in the Barnett Shale" [J. Petrol. Sci. Eng. 165 (2018) 691–710]

2018 ◽  
Vol 167 ◽  
pp. 627
Author(s):  
Michael Kenomore ◽  
Mohamed Hassan ◽  
Reza Malakooti ◽  
Hom Dhakal ◽  
Amjad Shah
Keyword(s):  
Shale Gas ◽  
Gas Production ◽  
Barnett Shale ◽  
Over Time

Numerical Simulation of Shale Gas Production

2011 ◽  
Vol 402 ◽  
pp. 804-807 ◽  
Author(s):  
Song Ru Mu ◽  
Shi Cheng Zhang
Keyword(s):  
Shale Gas ◽  
Simulation Models ◽  
Fracture Network ◽  
Gas Production ◽  
Wire Mesh ◽  
Well Performance ◽  
Gas Reservoirs ◽  
Shale Gas Reservoirs ◽  
Shale Reservoirs ◽  
Fracture Mapping

Shale gas reservoirs require a large fracture network to maximize well performance. Microseismic fracture mapping has shown that large fracture networks can be generated in many shale reservoirs. The application of microseismic fracture mapping measurements requires estimation of the structure of the complex hydraulic fracture or the volume of the reservoir that has been stimulated by the fracture treatment. There are three primary approaches used to incorporate microseismic measurements into reservoir simulation models: discrete modeling of the complex fracture network, wire-mesh model, and dual porosity model. This paper discuss the different simulation model, the results provided insights into effective stimulation designs and flow mechanism for shale gas reservoirs.

Sign in / Sign up

Export Citation Format

Share Document