scholarly journals Vermicomposting: Tool for Sustainable Ruminant Manure Management

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
A. Nasiru ◽  
N. Ismail ◽  
M. H. Ibrahim
Keyword(s):  
Waste Management ◽  
Physicochemical Properties ◽  
Health Risks ◽  
Agricultural Soils ◽  
Raw Materials ◽  
Biological Properties ◽  
Biochemical Properties ◽  
Manure Management ◽  
Biomass Waste ◽  
Solid Biomass

Ruminants are important sources of meat and milk. Their production is associated with manure excretion. Estimates of over 3,900,000 million metric tonnes of manure are produced daily from ruminants worldwide. Storage and spread of this waste on land pose health risks and environmental problems. Efficient and sustainable way of handling ruminant manure is required. Composting and vermicomposting are considered two of the best techniques for solid biomass waste management. This paper presents vermicomposting as an effective tool for ruminant manure management. Vermicomposting is a mesophilic biooxidation and stabilisation process of organic materials that involves the joint action of earthworm and microorganism. Compared with composting, vermicomposting has higher rate of stabilisation and it is greatly modifying its physical and biochemical properties, with low C : N ratio and homogenous end product. It is also costeffective and ecofriendly waste management. Due to its innate biological, biochemical and physicochemical properties, vermicomposting can be used to promote sustainable ruminant manure management. Vermicomposts are excellent sources of biofertiliser and their addition improves the physiochemical and biological properties of agricultural soils. In addition, earthworms from the vermicomposting can be used as source of protein to fishes and monogastric animals. Vermicompost can also be used as raw materials for bioindustries.

A LABORATORY WORK WITH BIOMASS: A CEMENT REPLACEMENT MATERIAL IN CONCRETE MIX

2016 ◽  
Vol 78 (5) ◽  
Author(s):  
Noor Faisal Abas
Keyword(s):  
Waste Management ◽  
Raw Materials ◽  
Biomass Ash ◽  
Biomass Waste ◽  
Great Opportunity ◽  
Cement Production ◽  
Cement Replacement ◽  
Increasing Demand ◽  
Near Future ◽  
Effective Result

The cement production facing the current environmental issue like CO2 emission and scarcity of raw materials, burning of higher amount fossil fuel for production and rapidly increasing demand for cement and concrete can be of a greater problem in the near future. On the other hand there is an ongoing issue of biomass waste management, so there is great opportunity for biomass ash to be used as a cement replacement material as many ongoing researches suggest. This can help to cut down the production of cement and with waste management. The pozzolanic characteristic of several biomass ash can be advantageous, and if the required strength of concrete can be achieved with a certain amount of replacement of cement with biomass ash, then this can be used widely if allowed by structural codes. This report explores the scope of biomass as a cement replacement material in several percentages (5%, 10%, 20%) and shows an effective result with 5 to 10% replacement as the cement with this percentage showed almost same engineering and durability properties like the traditional mix.

Solid Waste Management on Romanian Households

2018 ◽  
Vol 68 (12) ◽  
pp. 2941-2947
Author(s):  
George Ungureanu ◽  
Gabriela Ignat ◽  
elena Leonte ◽  
Carmen Luiza Costuleanu ◽  
Nicoleta Stanciu ◽  
...  
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Agricultural Development ◽  
Management Practices ◽  
Solid Waste Management ◽  
Raw Materials ◽  
Rapid Development ◽  
Disposal Site ◽  
Solid Waste Disposal ◽  
Factors Affecting

The problem associated with the household behavior on solid waste disposal site in today�s society is complex because of the large quantity and diverse nature of the wastes. Due increase the population, rapid development, global agricultural development has moved rapidly, limitations of financing, emerging limitations of both energy and raw materials and also add to the complexity of any waste management system, large quantities of wastes are being generated in different forms such as solid, liquid and gases. This research explored factors affecting the level of participation in solid waste segregation and recycling of households in Romania, as well as examining current Romania households waste management practices and their knowledge of waste management. This study investigated the solid waste situation and the organization of solid waste management in both urban and rural settings from the perspective of households. Solid waste management is a key component of public services which needs to serve the urban and rural municipalities in an efficient way in order to maintain a decent standard of public health.

Pendayagunaan Sampah Menjadi Produk Kerajinan

2017 ◽  
Vol 17 (1) ◽  
pp. 83
Author(s):  
Nur Fatoni ◽  
Rinaldy Imanuddin ◽  
Ahmad Ridho Darmawan
Keyword(s):  
Waste Management ◽  
Raw Materials ◽  
Economic Value ◽  
Waste Materials ◽  
Waste Collection ◽  
Garbage Disposal ◽  
Waste Separation ◽  
And Training

Waste management is still defined as limited to collection, transportation and garbage disposal. The follow-up of the meaning is the provision of facilities such as garbage bins, garbage trucks and waste collection land. Waste management has not included waste separation. Segregation of waste can minimize the amount of waste that must be discharged to the final place. Segregation of waste can supply recyclable raw materials and handicrafts made from garbage. The manufacture of handicraft products from garbage is still local and requires socialization and training. It is needed to increase the number of craftsmen and garbage absorption on the crafters. Through careful socialization and training, citizens' awareness of waste management becomes advanced by making handicrafts of economic value from waste materials.

scholarly journals How Far Away Are World Economies from Circularity: Assessing the Capacity of Circular Economy Policy Packages in the Operation of Raw Materials and Industrial Wastes

2021 ◽  
Vol 13 (8) ◽  
pp. 4394
Author(s):  
Margarita Ignatyeva ◽  
Vera Yurak ◽  
Alexey Dushin ◽  
Vladimir Strovsky ◽  
Sergey Zavyalov ◽  
...  
Keyword(s):  
The Netherlands ◽  
Waste Management ◽  
South Korea ◽  
Circular Economy ◽  
Raw Materials ◽  
Industrial Wastes ◽  
New Guidelines ◽  
The 1960S ◽  
Degree Level ◽  
The Eu

Nowadays, circular economy (CE) is on the agenda, however, this concept of closed supply chains originated in the 1960s. The current growing quantity of studies in this area accounts for different discourses except the holistic one, which mixes both approaches—contextual and operating (contextual approach utilizes the thorough examination of the CE theory, stricture of the policy, etc.; the operating one uses any kind of statistical data)—to assess the capacity of circular economy regulatory policy packages (CERPP) in operating raw materials and industrial wastes. This article demonstrates new guidelines for assessing the degree level of capacity (DLC) of CERPPs in the operation of raw materials and industrial wastes by utilizing the apparatus of the fuzzy set theory. It scrupulously surveys current CERPPs in three regions: the EU overall, Finland and Russia; and assesses for eight regions—the EU overall, Finland, Russia, China, Greece, France, the Netherlands and South Korea—the DLC of CERPPs in operating raw materials and industrial wastes. The results show that EU is the best in CE policy and its CERPP is 3R. The following are South Korea and China with the same type of CERPP. Finland, France and the Netherlands have worse results than EU with the type of CERPP called “integrated waste management” because of the absence of a waste hierarchy (reduce, recover, recycle). Russia closes the list with the type of CERPP “basic waste management”.

scholarly journals Rose Flowers—A Delicate Perfume or a Natural Healer?

Biomolecules ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 127
Author(s):  
Milka Mileva ◽  
Yana Ilieva ◽  
Gabriele Jovtchev ◽  
Svetla Gateva ◽  
Maya Margaritova Zaharieva ◽  
...  
Keyword(s):  
Essential Oils ◽  
Food Industry ◽  
Raw Materials ◽  
Biological Activities ◽  
Biological Properties ◽  
Rosa Damascena ◽  
Oil Sand ◽  
Rosa Gallica ◽  
Therapeutic Properties ◽  
Phytochemical Profile

Plants from the Rosacea family are rich in natural molecules with beneficial biological properties, and they are widely appreciated and used in the food industry, perfumery, and cosmetics. In this review, we are considering Rosa damascena Mill., Rosa alba L., Rosa centifolia L., and Rosa gallica L. as raw materials important for producing commercial products, analyzing and comparing the main biological activities of their essential oils, hydrolates, and extracts. A literature search was performed to find materials describing (i) botanical characteristics; (ii) the phytochemical profile; and (iii) biological properties of the essential oil sand extracts of these so called “old roses” that are cultivated in Bulgaria, Turkey, India, and the Middle East. The information used is from databases PubMed, Science Direct, and Google Scholar. Roses have beneficial healing properties due to their richness of beneficial components, the secondary metabolites as flavonoids (e.g., flavones, flavonols, anthocyanins), fragrant components (essential oils, e.g., monoterpenes, sesquiterpenes), and hydrolysable and condensed tannins. Rose essential oils and extracts with their therapeutic properties—as respiratory antiseptics, anti-inflammatories, mucolytics, expectorants, decongestants, and antioxidants—are able to act as symptomatic prophylactics and drugs, and in this way alleviate dramatic sufferings during severe diseases.

scholarly journals Physicochemical Properties of Handere Clays and Their Use as a Building Material

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yasin Erdoğan
Keyword(s):  
Physicochemical Properties ◽  
Building Materials ◽  
Raw Materials ◽  
Organic Matter Content ◽  
Volcanic Glass ◽  
Mineralogical Composition ◽  
Matter Content ◽  
Loss On Ignition ◽  
X Ray Diffraction ◽  
Clay Deposits

Handere clay deposits were discovered at Adana in Turkey. These clay units primarily consist of uncoloured claystone, pebbly sandstone, sandstone, siltstone, and mudstone marl and include gypsum lenses and clay levels of various thicknesses in places. The physicochemical properties of these clays have been investigated by different techniques including Scanning Electron and Elemental Analysis (SEM and EDS), mineralogical analyses, chemical and physical analyses, X-ray diffraction (XRD), thermogravimetric differential thermal analysis (TG-DTA), and Atterberg (Consistency) Limits Test. The mineralogical composition deduced from XRD is wide (smectite + palygorskite + illite ± feldspar ± chlorite ± quartz ± calcite ± serpentine) due to the high smectite contents (≈85%). SEM studies reveal that smectite minerals are composed of irregular platy leaves and show honeycomb pattern in the form of wavy leaves in places. The leaves presenting an array with surface edge contact are usually concentrated in the dissolution voids and fractures of volcanic glass. Organic matter content and loss on ignition analysis of raw materials are good for all the studied samples. In summary, Handere clays can be used as building materials in bricks, roof tiles, and cement and as a binder.

Sign in / Sign up

Export Citation Format

Share Document