scholarly journals Modeling and Parameter Analysis of the OC3-Hywind Floating Wind Turbine with a Tuned Mass Damper in Nacelle

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Yulin Si ◽  
Hamid Reza Karimi ◽  
Huijun Gao
Keyword(s):  
Wind Turbine ◽  
Structural Control ◽  
Parameter Tuning ◽  
Tuned Mass Damper ◽  
Parameter Analysis ◽  
Load Reduction ◽  
Floating Wind Turbine ◽  
Mass Damper ◽  
Moderate Load ◽  
Tuning Methods

Floating wind turbine will suffer from more fatigue and ultimate loads compared with fixed-bottom installation due to its floating foundation, while structural control offers a possible solution for direct load reduction. This paper deals with the modelling and parameter tuning of a spar-type floating wind turbine with a tuned mass damper (TMD) installed in nacelle. First of all, a mathematical model for the platform surge-heave-pitch motion and TMD-nacelle interaction is established based on D’Alembert’s principle. Both intrinsic dynamics and external hydro and mooring effects are captured in the model, while tower flexibility is also featured. Then, different parameter tuning methods are adopted to determine the TMD parameters for effective load reduction. Finally, fully coupled nonlinear wind turbine simulations with different designs are conducted in different wind and wave conditions. The results demonstrate that the design of TMD with small spring and damping coefficients will achieve much load reduction in the above rated condition. However, it will deteriorate system performance when the turbine is working in the below rated or parked situations. In contrast, the design with large spring and damping constants will produce moderate load reduction in all working conditions.

scholarly journals Analysis of Load Reduction of Floating Wind Turbines Using Passive Tuned Mass Dampers

2021 ◽  
Vol 9 (9) ◽  
pp. 1340-1345
Author(s):  
Aabas Ahmad
Keyword(s):  
Standard Deviation ◽  
Wind Turbine ◽  
Tuned Mass Damper ◽  
Mass Ratio ◽  
Longitudinal Displacement ◽  
Wave Load ◽  
Tuned Mass Dampers ◽  
Floating Wind Turbine ◽  
Mass Damper ◽  
Offshore Floating Wind Turbine

Abstract: An efficient method for restraining the large vibration displacements and loads of offshore floating wind turbines under harsh marine environment is proposed by putting tuned mass dampers in the cabin. A dynamics model for a barge-type offshore floating wind turbine with a fore–aft tuned mass damper is established based on Lagrange’s equations; the nonlinear least squares Leven berg–Marquardt algorithm is employed to identify the parameters of the wind turbine; different parameter optimization methods are adopted to optimize tuned mass damper parameters by considering the standard deviation of the tower top longitudinal displacement as the objective function. Aiming at five typical combined wind and wave load cases under normal running state of the wind turbine, the dynamic responses of the wind turbine with/without tuned mass damper are simulated and the suppression effect of the tuned mass damper is investigated over the wide range of load cases. The results show that when the wind turbine vibrates in the state of damped free vibration, the standard deviation of the tower top longitudinal displacement is decreased approximately 60% in 100 s by the optimized tuned mass damper with the optimum tuned mass damper mass ratio 1.8%. The standard deviation suppression rates of the longitudinal displacements and loads in the tower and blades increase with the tuned mass damper mass ratio when the wind turbine vibrates under the combined wind and wave load cases. When the mass ratio changes from 0.5% to 2%, the maximum suppression rates vary from 20% to 50% correspondingly, which effectively reduce vibration responses of the offshore floating wind turbine. The results of this article preliminarily verify the feasibilities of using a tuned mass damper for restraining vibration of the barge-type offshore floating wind turbine

scholarly journals An Investigation of Passive and Semi-Active Tuned Mass Dampers for a Tension Leg Platform Floating Offshore Wind Turbine in ULS Conditions

2016 ◽  
Author(s):  
Semyung Park ◽  
Matthew A. Lackner ◽  
John Cross-Whiter ◽  
A. Rodriguez Tsouroukdissian ◽  
William La Cava
Keyword(s):  
Wind Turbine ◽  
Active Control ◽  
Wind Turbines ◽  
Structural Control ◽  
Tuned Mass Damper ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Tension Leg Platform ◽  
Tuned Mass Dampers ◽  
Mass Damper

Floating offshore wind turbines are able to access deeper waters with stronger winds, but also have more complicated dynamic behavior than fixed-bottom offshore turbines, potentially resulting in larger loads. Structural control using tuned mass dampers (TMD) is a promising method for mitigating these loads. Previous research on structural control in wind turbines has typically considered passive devices and operational conditions. In this study, the effects of a passive tuned mass damper and a semi-active tuned mass damper, located at the tower top, are analyzed and simulated for the GE Haliade 150–6MW wind turbine located on the Glosten Pelastar tension-leg platform (TLP). The system is simulated using FASTv8, the wind turbine aero-elastic wind turbine simulator developed by NREL, which includes a TMD module capable of modeling passive and semi-active devices. A pendulum-type TMD developed by ESM GmbH, which can oscillate in the fore-aft and side-side directions, is modelled with non-linear position constraints. Semi-active control is defined using an “on-off” TMD damping based on a “ground-hook” control law. Ultimate limit state (ULS) conditions with a parked rotor are simulated, for two different water depths. The results are analyzed in terms of the load reductions at the tower base, nacelle acceleration reduction, and tendon tensions for the various configurations. The impact of TMD stroke limitations and the sensitivity of the results to water depth are investigated. The results will show that structural control can reduce ULS loads in deep water configurations, but are less effective in shallow water. The dynamics of the system that cause this result will be elucidated. The results will also demonstrate that semi-active control can be an effective strategy to further reduce loads and reduce the TMD stroke.

Active Tuned Mass Damper Control of Wind Turbine Nacelle/Tower Vibrations with Damaged Foundations

2013 ◽  
Vol 569-570 ◽  
pp. 660-667 ◽  
Author(s):  
Breiffni Fitzgerald ◽  
Biswajit Basu
Keyword(s):  
Wind Turbine ◽  
Structural Control ◽  
Three Dimensional ◽  
Tuned Mass Damper ◽  
Soil Medium ◽  
Active Structural Control ◽  
Control Scheme ◽  
Mass Damper ◽  
Out Of Plane ◽  
Tower Vibration

The aim of this paper is to develop an active structural control scheme to control wind turbine nacelle/tower out-of-plane vibration. An active tuned mass damper (ATMD) is designed an placed inside the turbine nacelle. An EulerLagrangian wind turbine model based on energy formulation is developed for this purpose, which considers the structural dynamics of the system and the interaction between in-plane and out-of-plane vibrations. Also, the interaction between the blades and the tower including the ATMD is considered. The wind turbine is subjected to gravity and turbulent aerodynamic loadings. A three-dimensional (3D) model of a wind turbine foundation is designed and analysed in the finite element geotechnical code PLAXIS. The rotation of the foundation is measured and used to calculate a rotational spring constant for use in wind turbine models to describe the soil-structure interaction (SSI) between the wind turbine foundation and the underlying soil medium. Damage is induced in the soil medium by a loss in foundation stiffness. The active control scheme is shown to reduce nacelle/tower vibration when damage occurs.

scholarly journals Vibration Mitigation of the Barge-Type Offshore Wind Turbine with a Tuned Mass Damper on Floating Platform

2018 ◽  
Vol 36 (2) ◽  
pp. 238-245 ◽  
Author(s):  
Jiajia Yang ◽  
Erming He ◽  
Yaqi Hu
Keyword(s):  
Wind Turbine ◽  
Tuned Mass Damper ◽  
Equal Mass ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Floating Platform ◽  
Vibration Mitigation ◽  
Floating Wind Turbine ◽  
Mass Damper

This paper evaluates the application of a passive control technique with a tuned mass damper on platform for the barge-type offshore wind turbine. First of all, the three degrees of freedom mathematical model for the floating wind turbine is established based on Lagrange's equations, and the Levenberg-Marquardt algorithm is adopted to estimate the parameters of the wind turbine. Then, the method of frequency tuning which is utilized in engineering projects and genetic algorithm are employed respectively to simulate the optimum parameters of the tuned mass damper. The vibration mechanism about the phase-angle difference between tuned mass damper and floating platform is analyzed. Finally, the dynamic responses of floating wind turbine with/without tuned mass damper are calculated under five typical wind and wave load cases, and the vibration mitigation effects are researched in marine environment. Partial ballast is substituted by the equal mass of tuned mass damper due to the mass of floating platform with tuned mass damper would increase obviously, which would change the design of the wind turbine, and the vibration mitigation is also simulated in five typical load cases. The results show that the suppression rate of standard deviation of platform pitch is up to 47.95%, after substituting the partial mass of ballast, the suppression rate is 50%. Therefore, the dynamic responses of the barge-type floating wind turbine would be reduced significantly when the ballast is replaced by the equal mass of the tuned mass damper on floating platform.

Optimization design of tuned mass damper for vibration suppression of a barge-type offshore floating wind turbine

2016 ◽  
Vol 231 (1) ◽  
pp. 302-315 ◽  
Author(s):  
Er-Ming He ◽  
Ya-Qi Hu ◽  
Yang Zhang
Keyword(s):  
Standard Deviation ◽  
Wind Turbine ◽  
Tuned Mass Damper ◽  
Mass Ratio ◽  
Longitudinal Displacement ◽  
Wave Load ◽  
Floating Wind Turbine ◽  
Wide Range ◽  
Mass Damper ◽  
Offshore Floating Wind Turbine

An efficient method for restraining the large vibration displacements and loads of offshore floating wind turbines under harsh marine environment is proposed by putting tuned mass dampers in the cabin. A dynamics model for a barge-type offshore floating wind turbine with a fore–aft tuned mass damper is established based on Lagrange’s equations; the nonlinear least squares Levenberg–Marquardt algorithm is employed to identify the parameters of the wind turbine; different parameter optimization methods are adopted to optimize tuned mass damper parameters by considering the standard deviation of the tower top longitudinal displacement as the objective function. Aiming at five typical combined wind and wave load cases under normal running state of the wind turbine, the dynamic responses of the wind turbine with/without tuned mass damper are simulated and the suppression effect of the tuned mass damper is investigated over the wide range of load cases. The results show that when the wind turbine vibrates in the state of damped free vibration, the standard deviation of the tower top longitudinal displacement is decreased approximately 60% in 100 s by the optimized tuned mass damper with the optimum tuned mass damper mass ratio 1.8%. The standard deviation suppression rates of the longitudinal displacements and loads in the tower and blades increase with the tuned mass damper mass ratio when the wind turbine vibrates under the combined wind and wave load cases. When the mass ratio changes from 0.5% to 2%, the maximum suppression rates vary from 20% to 50% correspondingly, which effectively reduce vibration responses of the offshore floating wind turbine. The results of this article preliminarily verify the feasibilities of using a tuned mass damper for restraining vibration of the barge-type offshore floating wind turbine.

Sign in / Sign up

Export Citation Format

Share Document