scholarly journals Fabrication of Pamidronic Acid-Immobilized TiO2/Hydroxyapatite Composite Nanofiber Mats for Biomedical Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Yong-Suk Shin ◽  
Jyoti S. Borah ◽  
Adnan Haider ◽  
Sukyoung Kim ◽  
Man-Woo Huh ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Pamidronic Acid ◽  
Bone Scaffold ◽  
Electrospinning Technique ◽  
Bone Implant ◽  
X Ray ◽  
Hydroxyapatite Composite ◽  
Composite Nanofiber ◽  
Nanofiber Mats ◽  
Cell Adhesion And Proliferation

TiO2/hydroxyapatite (TiO2/HA) composite nanofiber mats were fabricated using an electrospinning technique. Subsequently, pamidronic acid (PDA) was immobilized on the surface of the TiO2/HA nanofiber mat to improve osseointegration. X-ray photoelectron microscopy and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the PDA-immobilized TiO2/HA composite nanofiber mat (TiO2/HA-P). The potential of TiO2/HA-P as a bone scaffold was assessed by examining the cell adhesion and proliferation of osteoblasts and osteoclasts. The adhesion and proliferation of osteoblasts on the TiO2/HA-P composite nanofiber mat were slightly higher than those on the TiO2/HA composite nanofiber mat, whereas the viability of osteoclasts on the TiO2/HA-P nanofiber mat was significantly suppressed. These results suggest that the TiO2/HA-P nanofiber mat has the potential for use as a therapeutic bone implant.

Composite nanofiber mats consisting of hydroxyapatite and titania for biomedical applications

2010 ◽  
pp. n/a-n/a ◽  
Author(s):  
Hong Mi Kim ◽  
Won-Pyo Chae ◽  
Ki-Whan Chang ◽  
Sungsu Chun ◽  
Sukyoung Kim ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Composite Nanofiber ◽  
Nanofiber Mats

scholarly journals Surface properties and bioactivity of TiO 2 nanotube array prepared by two-step anodic oxidation for biomedical applications

2019 ◽  
Vol 6 (4) ◽  
pp. 181948 ◽  
Author(s):  
Zhaoxiang Peng ◽  
Jiahua Ni
Keyword(s):  
Cell Adhesion ◽  
Electron Microscope ◽  
Impedance Spectroscopy ◽  
Surface Energy ◽  
Anodic Oxidation ◽  
Biomedical Applications ◽  
Nanotube Array ◽  
Measuring Device ◽  
X Ray ◽  
Cell Adhesion And Proliferation

A highly ordered TiO 2 nanotube array has been prepared on a commercial pure titanium substrate in a hydrofluoric (HF) electrolyte using a DC power source through two-step anodic oxidation. The morphology, composition, wettability and surface energy of the nanotube array have been characterized by using a field-emission scanning electron microscope (FE-SEM), a transmission electron microscope (JEM-2010) with energy-dispersive X-ray spectrometer EDX (INCA OXFORD), X-ray diffraction method, an atomic force microscope (AFM), an optical contact angle measuring device and the Owens method with two liquids. The electrochemical behaviours of anodic oxidation films with different structures have been investigated in Sodium Lactate Ringer's Injection at 37±1°C by potentiodynamic polarization curve and electrochemical impedance spectroscopy. The formation mechanism of the nanotube array and the advantages of two-step oxidation have been discussed according to the experimental observation and the characterized results. Meanwhile, the structural changes of nanotubes are analysed according to the results of impedance spectroscopy. Cytotoxicity testing and cell adhesion and proliferation have been studied in order to evaluate the bioactivity of the nanotube array film. The diameters of nanotubes are in the range of 120–140 nm. The nanotube surface shows better wettability and higher surface energy compared to the bare substrate. The nanotube surface exhibits a wide passivation range and good corrosion resistance. The growth of the nanotube array is the result of the combined action of the anodization and field-assisted dissolution. The nanotube array by two-step oxidation becomes more regular and orderly. Moreover, the nanotube array surface is non-toxic and favourable to cell adhesion and proliferation. Such nanotube array films are expected to have significant biomedical applications.

Characterization of polyherbal-incorporated polycaprolactone nanofibrous mat for biomedical applications

2019 ◽  
Vol 34 (4-5) ◽  
pp. 401-411
Author(s):  
Rajalakshmi Ramamoorthy ◽  
Muthumanickkam Andiappan ◽  
Murugesan Muthalagu
Keyword(s):  
Drug Release ◽  
Biomedical Applications ◽  
X Ray Diffraction ◽  
Time Intervals ◽  
Drug Release Rate ◽  
Electrospinning Technique ◽  
X Ray ◽  
Thermogravimetric Analyzer ◽  
Physical And Chemical

The polyherbal-loaded polycaprolactone nanofibrous mat was prepared by electrospinning technique, and physical and chemical characteristics of nanofibrous mats were studied using scanning electron microscopy, x-ray diffraction, thermogravimetric analyzer, and Fourier transform infrared spectroscopy. The presence of various phytochemicals in the crude monoherbal and polyherbal extracts was analyzed. The antimicrobial activity and biocompatibility of the polyherbal-loaded nanofibrous mats were studied. The drug release pattern of the polyherbal-loaded nanofibrous mats was studied at different time intervals. The 5% drug-loaded nanofibrous mat shows higher sustainable drug release rate than 1% and 3% drug-loaded nanofibrous mats. The cell viability was found to be 98.91%, 98.77%, 98.5%, and 98.22% for polycaprolactone and 1%, 3%, and 5% for polyherbal-loaded nanofibrous mats, respectively.

Manufacture of Composite Nanofiber Mats with Fiber Diameters Grads by Electrospinning for Filtration Use

2011 ◽  
Vol 331 ◽  
pp. 206-209 ◽  
Author(s):  
Sha Sha Guo ◽  
Xiang Yu Jin ◽  
Hong Wang ◽  
Qin Fei Ke
Keyword(s):  
Composite Material ◽  
Fiber Diameter ◽  
Average Pore Size ◽  
Bottom Layer ◽  
Average Fiber Diameter ◽  
Electrospinning Technique ◽  
Average Pore ◽  
Composite Nanofiber ◽  
Filtration Material ◽  
Nanofiber Mats

The objective of this study is to prepare a filtration material with fiber diameter grade by electrospinning technique using meltblown nonwovens as collecting materials. The average fiber diameter of PET electrospinning in the top layer was 309.60nm and PET meltblown nonwoven in the bottom layer was 1.82um respectively. And this structure leads to the average pore size of electrospinning-meltblown composite material was 0.73um while it is up to 5.36um for the PET meltblown nonwoven. This design is especially good for high accurate filtration such as cells filtration, hydronium filtration.

Evaluation of Antibacterial and Antidiabetic Potential of Silver Nanoparticles using Eugenia Uniflora L. Seed Extract

2020 ◽  
Vol 13 (6) ◽  
pp. 5217-5225
Author(s):  
Guru Kumar Dugganaboyana ◽  
Chethankumar Mukunda ◽  
Suresh Darshini Inakanally
Keyword(s):  
Biomedical Applications ◽  
Pathogenic Bacteria ◽  
Seed Extract ◽  
Drug Formulation ◽  
Visible Spectroscopy ◽  
Plant Materials ◽  
X Ray ◽  
Eugenia Uniflora ◽  
Uv Visible

In recent years, green nanotechnology-based approaches using plant materials have been accepted as an environmentally friendly and cost-effective approach with various biomedical applications. In the current study, AgNPs were synthesized using the seed extract of the Eugenia uniflora L. (E.uniflora). Characterization was done using UV-Visible spectroscopy, X-ray diffraction (XRD), scanning electronic microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analyses. The formation of AgNPs has confirmed through UV-Visible spectroscopy (at 466 nm) by the change of color owing to surface Plasmon resonance. Based on the XRD pattern, the crystalline property of AgNPs was established. The functional group existing in seed of E.uniflora extract accountable for the reduction of Ag+ ion and the stabilization of AgNPs was investigated. The morphological structures and elemental composition was determined by SEM and EDX analysis. With the growing application of AgNPs in biomedical perspectives, the biosynthesized AgNPs were evaluated for their antibacterial and along with their antidiabetic potential. The results showed that AgNPs are extremely effective with potent antidiabetic potential at a very low concentration. It also exhibited potential antibacterial activity against the three tested human pathogenic bacteria. Overall, the results highlight the effectiveness and potential applications of AgNPs in biomedical fields such as in the treatment of acute illnesses as well as in drug formulation for treating various diseases such as cancer and diabetes. It could be concluded that E. uniflora seed extract AgNPs can be used efficiently for in vitro evaluation of their antibacterial and antidiabetic effects with potent biomedical applications.

Synthesis of mussel-inspired polydopamine-gallium nanoparticles for biomedical applications

Nanomedicine ◽  
2021 ◽  
Author(s):  
Jean Valdir Uchôa Teixeira ◽  
Fátima Raquel Azevedo Maia ◽  
Mariana Carvalho ◽  
Rui Reis ◽  
Joaquim Miguel Oliveira ◽  
...  
Keyword(s):  
Cell Proliferation ◽  
Biomedical Applications ◽  
Adipose Derived Stem Cells ◽  
Cell Analysis ◽  
Shell Formation ◽  
X Ray ◽  
Alkali Medium ◽  
Reproducible Method ◽  
Gallium Nanoparticles

Aim: To established a simple, controlled and reproducible method to synthesize gallium (Ga)-coated polydopamine (PDA) nanoparticles (NPs). Materials & methods: PDA NPs were synthesized in alkali medium with posterior Ga shell formation due to ion chelation on the NP surface. Results: The obtained results with energy-dispersive x-ray spectroscopy confirmed the incorporation of Ga on the PDA NP surface. The cytotoxicity of Ga-coated PDA NPs was evaluated in vitro at different concentrations in contact with human adipose-derived stem cells. Further cell analysis also demonstrated the benefit of Ga-coated PDA NPs, which increased the cell proliferation rate compared with noncoated PDA NPs. Conclusion: This study indicated that Ga could work as an appropriate shell for PDA NPs, inducing cell proliferation at the analyzed concentrations.

Visualization of Invasion into the Body and Internal Diffusion of Nanoparticles

2008 ◽  
Vol 396-398 ◽  
pp. 569-572
Author(s):  
Fumio Watari ◽  
Shigeaki Abe ◽  
I.D. Rosca ◽  
Atsuro Yokoyama ◽  
Motohiro Uo ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Fluorescent Microscopy ◽  
The Body ◽  
Internal Diffusion ◽  
Whole Body ◽  
X Ray ◽  
Body Level ◽  
Organ Level ◽  
Level 2 ◽  
Internal Body

Nanoparticles may invade directly into the internal body through the respiratory or digestive system and diffuse inside body. The behavior of nanoparticles in the internal body is also essential to comprehend for the realization of DDS. Thus it is necessary to reveal the internal dynamics for the proper treatments and biomedical applications of nanoparticles. In the present study the plural methods with different principles such as X-ray scanning analytical microscope (XSAM), MRI and Fluorescent microscopy were applied to enable the observation of the internal diffusion of micro/nanoparticles in the (1) whole body level, (2) inner organ level and (3) tissue and intracellular level. Chemical analysis was also done by ICP-AES for organs and compared with the results of XSAM mapping.

Effect of nanofibrous porosity on the X-ray attenuation properties of electrospun n-Bi2O3/epoxy–polyvinyl alcohol (PVA) nanofiber mats

2018 ◽  
Vol 124 (8) ◽  
Author(s):  
Bassam M. Abunahel ◽  
Ramzun Maizan Ramli ◽  
Khetam M. Quffa ◽  
Nurul Zahirah Noor Azman
Keyword(s):  
Polyvinyl Alcohol ◽  
X Ray ◽  
Nanofiber Mats

scholarly journals Polysaccharide-Based Aerogel Production for Biomedical Applications: A Comparative Review

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1631
Author(s):  
Mariangela Guastaferro ◽  
Ernesto Reverchon ◽  
Lucia Baldino
Keyword(s):  
Tissue Regeneration ◽  
Supercritical Co2 ◽  
Biomedical Applications ◽  
Freeze Drying ◽  
Time Interval ◽  
Comparative Review ◽  
Biomedical Field ◽  
Low Cytotoxicity ◽  
Gel Preparation ◽  
Cell Adhesion And Proliferation

A comparative analysis concerning bio-based gels production, to be used for tissue regeneration, has been performed in this review. These gels are generally applied as scaffolds in the biomedical field, thanks to their morphology, low cytotoxicity, and high biocompatibility. Focusing on the time interval 2015–2020, the production of 3D scaffolds of alginate, chitosan and agarose, for skin and bone regeneration, has mainly been investigated. Traditional techniques are critically reviewed to understand their limitations and how supercritical CO2-assisted processes could overcome these drawbacks. In particular, even if freeze-drying represents the most widespread drying technique used to produce polysaccharide-based cryogels, supercritical CO2-assisted drying effectively allows preservation of the nanoporous aerogel structure and removes the organic solvent used for gel preparation. These characteristics are essential for cell adhesion and proliferation.

Sign in / Sign up

Export Citation Format

Share Document