scholarly journals Studies on Ion-Exchange Properties of Polyaniline Zr(IV) Tungstoiodophosphate Nanocomposite Ion Exchanger

2013 ◽  
Vol 2013 ◽  
pp. 1-12 ◽  
Author(s):  
K. Jacinth Mispa ◽  
P. Subramaniam ◽  
R. Murugesan
Keyword(s):  
Ion Exchange ◽  
Material Science ◽  
Sol Gel ◽  
Ion Exchanger ◽  
X Ray Diffraction ◽  
X Ray ◽  
Antimicrobial Studies ◽  
Visible Spectra ◽  
Exchange Behaviour ◽  
Exchange Properties

Organic-inorganic hybrid materials prepared by sol-gel approach have attracted a great deal of attention in material science. Organic polymeric part of the composite provides mechanical and chemical stability whereas the inorganic part supports the ion-exchange behaviour and thermal stability and also increases the electrical conductivity. Such modified composite materials can be applied as an electrochemically switchable ion exchanger for water treatment, especially water softening. Polyaniline zirconium(IV) tungstoiodophosphate nanocomposite ion exchanger is prepared by sol-gel method. Polyaniline zirconium(IV) tungstoiodophosphate nanocomposite ion exchanger is synthesized and characterized by Fourier transform-infrared spectra, ultraviolet-visible spectra, X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, ion exchange, conductivity, and antimicrobial studies. A mechanism for the formation of the polyaniline zirconium(IV) tungstoiodophosphate nanocomposite ion exchanger was discussed. The route reported here may be used for the preparation of other nanocomposite ion exchangers.

Synthesis and Characterization of Novel Inorganic Microporous Beryllophosphates

1992 ◽  
Vol 57 (4) ◽  
pp. 794-798 ◽  
Author(s):  
Long Yu ◽  
Wenqin Pang
Keyword(s):  
Ion Exchange ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Factors Affecting ◽  
X Ray ◽  
Earth Cation ◽  
Diffraction Patterns ◽  
Unique Framework ◽  
Exchange Properties

Five new types of microporous beryllophosphates were hydrothermally synthesized using BeO-P2O5-R-MCl (or MCl2)-H2O, R being cyclohexylamine (CHA), pyrrolidine, 1-butylamine or triethylamine, M alkali or alkali earth cation. X-Ray diffraction patterns (XRD), infrared (IR), TG-DT and elemental analysis show that the crystalline beryllophosphates have novel, unique framework structures, composed from basic units of tetrahedral PO4 and BeO4. These materials exhibit zeolite-like adsorption and ion-exchange properties. Factors affecting the product crystallization (as e.g. pH), type of cation and composition of reaction mixture are discussed.

scholarly journals Ion-exchange properties of solid solutions based on hydrated forms of monovalent metals antimonate-tungstates

2020 ◽  
Vol 62 (6) ◽  
pp. 74-79
Author(s):  
Olga A. Firsova ◽  
◽  
Elena M. Filonenko ◽  
Yulia A. Lupitskaya ◽  
Hurshid N. Bozorov ◽  
...  
Keyword(s):  
Ir Spectroscopy ◽  
Ion Exchange ◽  
Solid Solutions ◽  
Rietveld Method ◽  
Type Structure ◽  
Water Molecules ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pyrochlore Type ◽  
Exchange Properties

The research of tungsten-antimony crystalline acid (TACA) structural transformations in the condition of ion-exchange and thermolysis of its substituted M+, H+-forms (M+ – Li, Na, K, Ag) were conducted. The data of thermogravimetric and qualitative X-ray phase analyses made it possible to conclude that the thermolysis of TACA and its derivatives proceeds in a wide temperature range from 300 to 1150 K being accompanied by the removal of crystalline water molecules with the formation of phases mixture containing complex antimony oxides of the ( -,  - Sb2O4) modification and WO3. It was shown that compounds based on hydrated forms of monovalent metal antimonates-tungstates are stable up to 1023 K with a pyrochlore-type structure. For pyrochlore-like phases, a monotonic dependence of unit cell parameter a on ion-exchange degree α and the ionic radius of metals r was revealed indicating the formation of solid solutions Мх(Н3О)1–хWSbO6 nН2О (M+ – Li, Na, K, Ag; 0.0≤х<1.0; 0.0≤n<2.0) with a limited range of solubility from the crystal chemistry point of view. Within the framework of the Fd-3m space group, based on the data of X-ray diffraction analysis (Rietveld method), the structural characteristics of TACA and its substituted M+, H+-forms were refined, and a model for populating the corresponding metal ions by crystallographic positions of the pyrochlore-type structure was proposed. Using a complex of physicochemical methods (thermogravimetric, X-ray diffraction analyses and IR spectroscopy), a correlation between the composition of the obtained compounds, structural disorder, and ion-exchange properties were determined. According to the data of thermogravimetry and IR spectroscopy, it follows that the degree of compounds hydration analyzed depends on the nature of the alkaline ion. This allows to conclude that lithium and sodium ions are located in 16d– positions, dragging neutral water molecules into the structure occupying 8b-positions. In this case, potassium ions can partially occupy both 16d- and 8b-positions of the structure.

Strahlungsinduzierte und ionenaustauschbedingte Kristalldefekte in Zirkoniumphosphaten

1977 ◽  
Vol 146 (1-3) ◽  
Author(s):  
E. Born ◽  
G. Paul
Keyword(s):  
Ion Exchange ◽  
Diffuse Scattering ◽  
Zirconium Phosphate ◽  
Ion Exchanger ◽  
X Ray Diffraction ◽  
X Ray ◽  
Low Symmetry

AbstractFor the low-symmetry system of the ion-exchanger zirconium phosphate the influence of irradiation and ion-exchange on the crystal disorder has been investigated by means of photographic x-ray diffraction methods. The weakening and the shifting of Bragg reflections and the broadening of maxima of diffuse scattering allow the estimation of the concentration and the strength of defects induced in this system.

Synthesis and characterization of a new crystalline tin(IV) arsenophosphate ion exchanger

1990 ◽  
Vol 68 (2) ◽  
pp. 346-349 ◽  
Author(s):  
K. V. Surendra Nath ◽  
S. N. Tandon
Keyword(s):  
Ion Exchange ◽  
Cation Exchanger ◽  
Exchange Capacity ◽  
Ion Exchanger ◽  
Amorphous Precursor ◽  
X Ray ◽  
Inorganic Ion Exchanger ◽  
Inorganic Ion ◽  
Exchange Behaviour

A new crystalline layered inorganic ion exchanger tin(IV) arsenophosphate with the formula Sn(HAsO4)(HPO4)•H2O has been prepared by refluxing the amorphous precursor. This exchanger has been characterized by X-ray powder pattern, chemical analysis, IR spectra, and thermal dehydration. Its ion exchange behaviour towards sodium ions is reported. The exchanger has an exchange capacity of 5.36 mequiv./g for Na+. The performance of tin(IV) arsenophosphate is compared with crystalline tin(IV) phosphate and arsenate. Keywords: cation exchanger, crystalline tin(IV) arsenophosphate, ion exchange, thermal behaviour, X-ray studies.

Synthesis and ion exchange properties of zirconogermanates

MRS Advances ◽  
2018 ◽  
Vol 4 (17-18) ◽  
pp. 965-970
Author(s):  
Ryan George ◽  
Joseph A. Hriljac
Keyword(s):  
Ion Exchange ◽  
Parent Material ◽  
Phase Model ◽  
X Ray Diffraction ◽  
Two Phase ◽  
Niobium Content ◽  
Rietveld Refinements ◽  
X Ray ◽  
Peak Splitting ◽  
Exchange Properties

AbstractPure and Nb-doped zirconium germanate materials of composition K2-xZr1-xNbxGe3O9.H2O where x = 0, 0.1, 0.2 and 0.25 with the structure of the mineral umbite have been successfully synthesised. The parent material displays negligible ion exchange of K+ for Cs+ but the doped materials shows much improved exchange. Synchrotron X-ray diffraction shows substantial peak splitting which varies with increasing niobium content. Preliminary Rietveld refinements suggest a two phase model with a caesium and potassium rich doped umbite phase.

scholarly journals Synthesis and Characterization of Rhodium Doped on TiO2/HCP for Enhanced Photocatalytic Performance on Pentachlorophenol

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Saheed Olalekan Sanni ◽  
Omoruyi Gold Idemudia
Keyword(s):  
Visible Light ◽  
Surface Characterization ◽  
Sol Gel ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Light Region ◽  
Visible Spectra

Visible-light-responsive material based on Rhodium doped on titanium dispersed on dealuminated clinoptilolite (TiO2/HCP) was synthesized via a combination of the sol-gel method and photoreductive deposition technique. The photocatalyst surface characterization, structural and optical properties were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), and UV-visible spectra (UV-VIS). Doping TiO2/HCP with Rh imparts a red shifting of the absorption band into the visible light region according to UV-VIS. The prepared composite materials were evaluated for their photocatalytic activities on pentachlorophenol (PCP) degradation under sunlight irradiation. The Rhodium doped TiO2/HCP exhibited enhanced photocatalytic activity and can be considered as a potential photocatalyst in wastewater treatment.

PENGGUNAAN TiO2 PARTIKEL NANO HASIL SINTESIS BERBASIS AIR MENGGUNAKAN METODA SOL-GEL PADA BAHAN KAPAS SEBAGAI APLIKASI UNTUK TEKSTIL ANTI UV

Arena Tekstil ◽  
2013 ◽  
Vol 28 (1) ◽  
Author(s):  
Maya Komalasari ◽  
Bambang Sunendar
Keyword(s):  
Fourier Transform ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Sol Gel ◽  
Crosslinking Agent ◽  
X Ray Diffraction ◽  
Nano Tio2 ◽  
X Ray ◽  
Infra Red ◽  
Scanning Electron

Partikel nano TiO2 berbasis air dengan pH basa telah berhasil disintesis dengan menggunakan metode sol-gel dan diimobilisasi pada kain kapas dengan menggunakan kitosan sebagai zat pengikat silang. Sintesis dilakukan  dengan prekursor TiCl4 pada konsentrasi 0,3 M, 0,5 M dan 1 M, dan menggunakan templat kanji dengan proses kalsinasi pada suhu 500˚C selama 2 jam. Partikel nano TiO2 diaplikasikan ke kain kapas dengan metoda pad-dry-cure dan menggunakan kitosan sebagai crosslinking agent. Berdasarkan hasil Scanning Electron Microscope (SEM),diketahui bahwa morfologi partikel TiO2 berbentuk spherical dengan ukuran nano (kurang dari 100 nm). Karakterisasi X-Ray Diffraction (XRD) menunjukkan adanya tiga tipe struktur kristal utama, yaitu (100), (101) dan (102) dengan fasa kristal yang terbentuk adalah anatase dan rutile. Pada karakterisasi menggunakan SEM terhadap serbuk dari TiO2 yang telah diaplikasikan ke permukaan kain kapas, terlihat adanya imobilisasi partikel nano TiO2 melalui ikatan hidrogen silang dengan kitosan pada kain kapas. Hasil analisa tersebut kemudian dikonfirmasi dengan FTIR (Fourier Transform Infra Red) yang hasilnya memperlihatkan puncak serapan pada bilangan gelombang 3495 cm-1, 2546 cm-1, dan 511 cm-1,  yang masing-masing diasumsikan sebagai adanya vibrasi gugus fungsi O-H, N-H dan Ti-O-Ti. Hasil SEM menunjukkan pula bahwa kristal nano yang terbentuk diantaranya adalah fasa rutile , yang berdasarkan literatur terbukti dapatberfungsi sebagai anti UV.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Effect of Calcinations on Characterizations of Fabricated Nano Manganese Ferrite

2013 ◽  
Vol 634-638 ◽  
pp. 2150-2154 ◽  
Author(s):  
Rita Sundari ◽  
Tang Ing Hua ◽  
M. Rusli Yosfiah
Keyword(s):  
Sol Gel ◽  
Volatile Components ◽  
Manganese Ferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reflectance Analysis ◽  
Transmission Electron Microscope Analysis ◽  
Electron Microscope Analysis ◽  
Nano Size

A citric acid anionic surfactant has been applied for nano manganese ferrite (MnFeO3) fabrication using sol gel method. The calcinations have been varied for 300, 600 and 800oC. The UVDR (UV-Vis Diffused Reflectance) analysis shows a high absorptive band gap after 400 nm for the 600oC calcinated MnFeO3. The DTA (Differential Thermal Analysis) profiles exhibit remarkably trapped volatile matters (H2O, CO2, and NO2) in the fabricated MnFeO3 under sol gel heat treatment at 100oC and the peaks disappeared as the calcination increased to 600oC. As the temperature elevated from 100 to 300oC, the absorption peaks of volatile components are disappeared as demonstrated clearly by the FTIR (Fourier Transform Infrared) spectra of the fabricated material, which 3393 cm-1 corresponded to OH group, 1624 cm-1 to CO group, and 1384 cm-1 to NO group. The XRD (X-Ray Diffraction) spectra show clearly the alteration process from amorphous to crystalline structure as the calcinations increased from 300 to 600oC. In addition, the TEM (Transmission Electron Microscope) analysis exhibits parts of the fabricated MnFeO3 found in cubic nano size of 15-40 nm under interested calcinations and the result is in agreement with that obtained by XRD investigation.

Sign in / Sign up

Export Citation Format

Share Document