scholarly journals A Review of Antennas for Indoor Positioning Systems

2012 ◽  
Vol 2012 ◽  
pp. 1-14 ◽  
Author(s):  
Luis Brás ◽  
Nuno Borges Carvalho ◽  
Pedro Pinho ◽  
Lukasz Kulas ◽  
Krzysztof Nyka
Keyword(s):  
Indoor Localization ◽  
Time Of Flight ◽  
Signal Strength ◽  
Direction Of Arrival ◽  
Indoor Positioning ◽  
Received Signal Strength ◽  
Positioning Systems ◽  
Anchor Nodes ◽  
Localization Systems

This paper provides a review of antennas applied for indoor positioning or localization systems. The desired requirements of those antennas when integrated in anchor nodes (reference nodes) are discussed, according to different localization techniques and their performance. The described antennas will be subdivided into the following sections according to the nature of measurements: received signal strength (RSS), time of flight (ToF), and direction of arrival (DoA). This paper intends to provide a useful guide for antenna designers who are interested in developing suitable antennas for indoor localization systems.

Robustness in Fingerprinting-Based Indoor Positioning Systems

2018 ◽  
pp. 88-141 ◽  
Author(s):  
Shih-Hau Fang
Keyword(s):  
Principal Component Analysis ◽  
Principal Component ◽  
Signal Strength ◽  
Histogram Equalization ◽  
Indoor Positioning ◽  
Received Signal Strength ◽  
Location Estimation ◽  
Location Based Services ◽  
Indoor Environments ◽  
Positioning Systems

Indoor positioning systems have received increasing attention for supporting location-based services in indoor environments. Received signal strength (RSS), mostly utilized in Wi-Fi fingerprinting systems, is known to be unreliable due to two reasons: orientation mismatch and variations in hardware. This chapter introduces an approach based on histogram equalization to compensate for orientation mismatch in robust Wi-Fi localization. The proposed method involves converting the temporal-spatial radio signal strength into a reference function (i.e., equalizing the histogram). This chapter also introduces an enhanced positioning feature, which is called delta-fused principal strength, to enhance the robustness of Wi-Fi localization against the problem of heterogeneous hardware. This algorithm computes the pairwise delta RSS and then integrates with RSS using principal component analysis. The proposed methods effectively and efficiently improve the robustness of location estimation in the presence of mismatch orientation and hardware variations, respectively.

scholarly journals Fingerprint Database Variations for WiFi Positioning

2013 ◽  
Vol 11 (10) ◽  
pp. 3101-3107
Author(s):  
Nelson Acosta ◽  
Juan Toloza ◽  
Carlos Kornuta
Keyword(s):  
Mobile Device ◽  
Signal Strength ◽  
Indoor Positioning ◽  
Received Signal Strength ◽  
Relative Precision ◽  
Received Signal Strength Indicator ◽  
Positioning Systems ◽  
Fingerprinting Technique ◽  
Euclidian Distance ◽  
Fingerprint Database

Indoor positioning systems calculate the position of a mobile device (MD) in an enclosed environment with relative precision. Most systems use WiFi infrastructure and several positioning techniques, where the most commonly used parameter is RSSI (Received Signal Strength Indicator). In this paper, we analyze the fingerprinting technique to calculate the error window obtained with the Euclidian distance as main metric. Build variations are presented for the Fingerprint database analyzing various statistical values to compare the precision achieved with different indicators.

scholarly journals An Accurate Visual-Inertial Integrated Geo-Tagging Method for Crowdsourcing-Based Indoor Localization

2019 ◽  
Vol 11 (16) ◽  
pp. 1912 ◽  
Author(s):  
Tao Liu ◽  
Xing Zhang ◽  
Qingquan Li ◽  
Zhixiang Fang ◽  
Nadeem Tahir
Keyword(s):  
Indoor Localization ◽  
Signal Strength ◽  
Indoor Positioning ◽  
Received Signal Strength ◽  
Reference Points ◽  
External Information ◽  
Calibration Error ◽  
K Nearest Neighbor ◽  
Initial Location ◽  
Radio Map

One of the unavoidable bottlenecks in the public application of passive signal (e.g., received signal strength, magnetic) fingerprinting-based indoor localization technologies is the extensive human effort that is required to construct and update database for indoor positioning. In this paper, we propose an accurate visual-inertial integrated geo-tagging method that can be used to collect fingerprints and construct the radio map by exploiting the crowdsourced trajectory of smartphone users. By integrating multisource information from the smartphone sensors (e.g., camera, accelerometer, and gyroscope), this system can accurately reconstruct the geometry of trajectories. An algorithm is proposed to estimate the spatial location of trajectories in the reference coordinate system and construct the radio map and geo-tagged image database for indoor positioning. With the help of several initial reference points, this algorithm can be implemented in an unknown indoor environment without any prior knowledge of the floorplan or the initial location of crowdsourced trajectories. The experimental results show that the average calibration error of the fingerprints is 0.67 m. A weighted k-nearest neighbor method (without any optimization) and the image matching method are used to evaluate the performance of constructed multisource database. The average localization error of received signal strength (RSS) based indoor positioning and image based positioning are 3.2 m and 1.2 m, respectively, showing that the quality of the constructed indoor radio map is at the same level as those that were constructed by site surveying. Compared with the traditional site survey based positioning cost, this system can greatly reduce the human labor cost, with the least external information.

scholarly journals Self-calibration and Collaborative Localization for UWB Positioning Systems

2021 ◽  
Vol 54 (4) ◽  
pp. 1-27
Author(s):  
Matteo Ridolfi ◽  
Abdil Kaya ◽  
Rafael Berkvens ◽  
Maarten Weyn ◽  
Wout Joseph ◽  
...  
Keyword(s):  
Indoor Localization ◽  
Ultra Wideband ◽  
Mobile Nodes ◽  
Positioning Systems ◽  
Self Calibration ◽  
Significant Research ◽  
Anchor Nodes ◽  
Collaborative Localization ◽  
The Cost ◽  
Localization Systems

Ultra-Wideband (UWB) is a Radio Frequency technology that is currently used for accurate indoor localization. However, the cost of deploying such a system is large, mainly due to the need for manually measuring the exact location of the installed infrastructure devices (“anchor nodes”). Self-calibration of UWB reduces deployment costs, because it allows for automatic updating of the coordinates of fixed nodes when they are installed or moved. Additionally, installation costs can also be reduced by using collaborative localization approaches where mobile nodes act as anchors. This article surveys the most significant research that has been done on self-calibration and collaborative localization. First, we find that often these terms are improperly used, leading to confusion for the readers. Furthermore, we find that in most of the cases, UWB-specific characteristics are not exploited, so crucial opportunities to improve performance are lost. Our classification and analysis provide the basis for further research on self-calibration and collaborative localization in the deployment of UWB indoor localization systems. Finally, we identify several research tracks that are open for investigation and can lead to better performance, e.g., machine learning and optimized physical settings.

scholarly journals Hybrid Deep Learning Model Based Indoor Positioning Using Wi-Fi RSSI Heat Maps for Autonomous Applications

Electronics ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 2
Author(s):  
Alwin Poulose ◽  
Dong Seog Han
Keyword(s):  
Deep Learning ◽  
Signal Strength ◽  
Indoor Positioning ◽  
Learning Model ◽  
Signal Interference ◽  
Positioning System ◽  
Heat Maps ◽  
Positioning Systems ◽  
Localization Performance ◽  
Deep Learning Model

Positioning using Wi-Fi received signal strength indication (RSSI) signals is an effective method for identifying the user positions in an indoor scenario. Wi-Fi RSSI signals in an autonomous system can be easily used for vehicle tracking in underground parking. In Wi-Fi RSSI signal based positioning, the positioning system estimates the signal strength of the access points (APs) to the receiver and identifies the user’s indoor positions. The existing Wi-Fi RSSI based positioning systems use raw RSSI signals obtained from APs and estimate the user positions. These raw RSSI signals can easily fluctuate and be interfered with by the indoor channel conditions. This signal interference in the indoor channel condition reduces localization performance of these existing Wi-Fi RSSI signal based positioning systems. To enhance their performance and reduce the positioning error, we propose a hybrid deep learning model (HDLM) based indoor positioning system. The proposed HDLM based positioning system uses RSSI heat maps instead of raw RSSI signals from APs. This results in better localization performance for Wi-Fi RSSI signal based positioning systems. When compared to the existing Wi-Fi RSSI based positioning technologies such as fingerprint, trilateration, and Wi-Fi fusion approaches, the proposed approach achieves reasonably better positioning results for indoor localization. The experiment results show that a combination of convolutional neural network and long short-term memory network (CNN-LSTM) used in the proposed HDLM outperforms other deep learning models and gives a smaller localization error than conventional Wi-Fi RSSI signal based localization approaches. From the experiment result analysis, the proposed system can be easily implemented for autonomous applications.

scholarly journals A Generative Method for Indoor Localization Using Wi-Fi Fingerprinting

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2392
Author(s):  
Óscar Belmonte-Fernández ◽  
Emilio Sansano-Sansano ◽  
Antonio Caballer-Miedes ◽  
Raúl Montoliu ◽  
Rubén García-Vidal ◽  
...  
Keyword(s):  
Markov Model ◽  
Hidden Markov Model ◽  
Indoor Localization ◽  
Hidden Markov ◽  
Signal Strength ◽  
Access Point ◽  
Received Signal Strength ◽  
Machine Learning Algorithms ◽  
Forward Algorithm ◽  
Generative Method

Indoor localization is an enabling technology for pervasive and mobile computing applications. Although different technologies have been proposed for indoor localization, Wi-Fi fingerprinting is one of the most used techniques due to the pervasiveness of Wi-Fi technology. Most Wi-Fi fingerprinting localization methods presented in the literature are discriminative methods. We present a generative method for indoor localization based on Wi-Fi fingerprinting. The Received Signal Strength Indicator received from a Wireless Access Point is modeled by a hidden Markov model. Unlike other algorithms, the use of a hidden Markov model allows ours to take advantage of the temporal autocorrelation present in the Wi-Fi signal. The algorithm estimates the user’s location based on the hidden Markov model, which models the signal and the forward algorithm to determine the likelihood of a given time series of Received Signal Strength Indicators. The proposed method was compared with four other well-known Machine Learning algorithms through extensive experimentation with data collected in real scenarios. The proposed method obtained competitive results in most scenarios tested and was the best method in 17 of 60 experiments performed.

Indoor Positioning Using WLAN Received Signal Strength

2004 ◽  
Vol 37 (7) ◽  
pp. 77-80
Author(s):  
Jaywon Chey ◽  
Jae Woong Chun ◽  
Suk Ja Kim ◽  
Jin Hyun Lee ◽  
Gyu-In Jee ◽  
...  
Keyword(s):  
Signal Strength ◽  
Indoor Positioning ◽  
Received Signal Strength
Sign in / Sign up

Export Citation Format

Share Document