scholarly journals Design of a Random Decrement Method Based Structural Health Monitoring System

2012 ◽  
Vol 19 (5) ◽  
pp. 787-794 ◽  
Author(s):  
H. Buff ◽  
A. Friedmann ◽  
M. Koch ◽  
T. Bartel ◽  
M. Kauba
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
Modal Strain Energy ◽  
Efficient System ◽  
Structural Health ◽  
Random Decrement ◽  
Acceleration Sensors ◽  
Random Decrement Method ◽  
Sensor Positions

Structural Health Monitoring (SHM) has reached a high importance in numerous fields of civil and mechanical engineering. Promising damage detection approaches like the Damage Index Method, Gapped Smoothing Technique and Modal Strain Energy Method require the structure's mode shapes [1].Long term modal data acquisition on real life structures requires a computational efficient system based on a measuring method that can easily be installed. Systems using the Random Decrement Method (RDM) are composed of a decentralized network of smart acceleration sensors applied for both, triggering and pure measuring. They allow the reduction of cabling effort and computational costs to a minimum.In order to design a RDM measuring network efficiently, an approved procedure for defining hardware as well as measuring settings is required. In addition, optimal sensor positions have to be defined. However, today those decisions are mostly based on expert's knowledge. In this paper a systematic and analytical procedure for defining the hardware requirements and measuring settings as well as optimal sensor positions is presented. The proposed routine uses the outcome of an Experimental Modal Analysis (EMA).Due to different requirements for triggering and non-triggering sensors in the RDM network a combination of two approaches for sensor placement has to be used in order to find the best distribution of measurement points over the structure. A controllability based technique is used for placing triggering sensors, whereas the Effective Independence (EI) is utilized for the placement of non-triggering sensors.The combination of these two techniques selects the best set of measuring points for a given number of sensors out of all possible sensor positions.Damage detection itself is not considered within the scope of this paper.

scholarly journals Magnetostrictive Sensors for Composite Damage Detection and Wireless Structural Health Monitoring

2019 ◽  
Vol 55 (7) ◽  
pp. 1-6
Author(s):  
Zhaoyuan Leong ◽  
William Holmes ◽  
James Clarke ◽  
Akshay Padki ◽  
Simon Hayes ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
Structural Health ◽  
Composite Damage

Time–frequency and time–scale analyses for structural health monitoring

2006 ◽  
Vol 365 (1851) ◽  
pp. 449-477 ◽  
Author(s):  
Wiesław J Staszewski ◽  
Amy N Robertson
Keyword(s):  
Signal Processing ◽  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
Time Scale ◽  
Time Frequency ◽  
Structural Health ◽  
Variant Analysis

Signal processing is one of the most important elements of structural health monitoring. This paper documents applications of time-variant analysis for damage detection. Two main approaches, the time–frequency and the time–scale analyses are discussed. The discussion is illustrated by application examples relevant to damage detection.

Radar-based structural health monitoring of wind turbine blades: The case of damage detection

2017 ◽  
Vol 17 (4) ◽  
pp. 815-822 ◽  
Author(s):  
Jochen Moll ◽  
Philip Arnold ◽  
Moritz Mälzer ◽  
Viktor Krozer ◽  
Dimitry Pozdniakov ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Wind Turbine ◽  
Health Monitoring ◽  
Turbine Blades ◽  
Heterogeneous Material ◽  
Material System ◽  
Wind Turbine Blades ◽  
Millimetre Wave ◽  
Structural Health

Structural health monitoring of wind turbine blades is challenging due to its large dimensions, as well as the complex and heterogeneous material system. In this article, we will introduce a radically new structural health monitoring approach that uses permanently installed radar sensors in the microwave and millimetre-wave frequency range for remote and in-service inspection of wind turbine blades. The radar sensor is placed at the tower of the wind turbine and irradiates the electromagnetic waves in the direction of the rotating blades. Experimental results for damage detection of complex structures will be presented in a laboratory environment for the case of a 10-mm-thick glass-fibre-reinforced plastic plate, as well as a real blade-tip sample.

scholarly journals Application of Machine Learning with Impedance Based Techniques for Structural Health Monitoring of Civil Infrastructure

2019 ◽  
Vol 8 (6S4) ◽  
pp. 1139-1148
Keyword(s):  
Machine Learning ◽  
Signal Processing ◽  
Structural Health Monitoring ◽  
Damage Detection ◽  
Soft Computing ◽  
Health Monitoring ◽  
Multiple Cracks ◽  
Civil Infrastructure ◽  
Structural Health ◽  
Soft Computing Techniques

Increased attentiveness on the environmental and effects of aging, deterioration and extreme events on civil infrastructure has created the need for more advanced damage detection tools and structural health monitoring (SHM). Today, these tasks are performed by signal processing, visual inspection techniques along with traditional well known impedance based health monitoring EMI technique. New research areas have been explored that improves damage detection at incipient stage and when the damage is substantial. Addressing these issues at early age prevents catastrophe situation for the safety of human lives. To improve the existing damage detection newly developed techniques in conjugation with EMI innovative new sensors, signal processing and soft computing techniques are discussed in details this paper. The advanced techniques (soft computing, signal processing, visual based, embedded IOT) are employed as a global method in prediction, to identify, locate, optimize, the damage area and deterioration. The amount and severity, multiple cracks on civil infrastructure like concrete and RC structures (beams and bridges) using above techniques along with EMI technique and use of PZT transducer. In addition to survey advanced innovative signal processing, machine learning techniques civil infrastructure connected to IOT that can make infrastructure smart and increases its efficiency that is aimed at socioeconomic, environmental and sustainable development.

High-performance fiber optic systems for damage detection and structural health monitoring

2004 ◽  
Author(s):  
Mark E. Seaver ◽  
Stephen T. Trickey ◽  
Jonathan M. Nichols ◽  
Linda Moniz ◽  
Lou Pecora ◽  
...  
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
High Performance ◽  
Fiber Optic ◽  
Structural Health ◽  
High Performance Fiber ◽  
Optic Systems
Sign in / Sign up

Export Citation Format

Share Document