scholarly journals Donor Acceptor Bond in [NPCl2]3—MCl3Adducts, a DFT Study and Comparison of Results with Experimental X-Ray Data

2012 ◽  
Vol 9 (4) ◽  
pp. 2097-2107
Author(s):  
Alireza Akbari ◽  
Hoda Ghatezadeh ◽  
Babak Golzadeh ◽  
Sattar Arshadi
Keyword(s):  
Density Functional ◽  
Molecular Structures ◽  
Basis Set ◽  
Maximum Matching ◽  
Dihedral Angles ◽  
Geometrical Parameters ◽  
X Ray ◽  
Stable Adduct ◽  
Donor Acceptor ◽  
The Difference

Molecular structures of [PCl2N]3-MCl3adducts, M=B, Al, Ga, In, Tl, have been studied employing HF, B3LYP*, B3LYP , PW91, BLYP, OLYP, BP and LDA methods using DZP basis set (as defined in Amsterdam Density Functional, ADF, package). Some aspects of adduct formation like considering the difference between Front and Back dihedral angles and also ring puckering showed that the [PCl2N]3-AlCl3is the most stable adduct comparing the others. Based on the comparison between the X-ray and theoretical geometrical parameters of [NPCl2]3(AlCl3) and [NPCl2]3(GaCl3), the LDA method and BP, PW91 and OLYP functionals combined with DZP basis set were found to yield the most satisfactory agreement. Results showed that with surprise, the LDA(DZP) method has the maximum matching with experimental data, comparing the others.

scholarly journals Experimental and theoretical studies of 4-[(4-methyl-5-phenyl- 4H1,2,4-triazol-3-yl)sulfanyl]benzene-1,2-dicarbonitrile

2016 ◽  
Vol 35 (2) ◽  
pp. 169
Author(s):  
Ufuk Çoruh ◽  
Reşat Ustabaş ◽  
Hakkı Türker Akçay ◽  
Emra Menteşe ◽  
Ezequiel M. Vazquez Lopez
Keyword(s):  
Molecular Structure ◽  
Density Functional ◽  
Basis Set ◽  
Geometrical Parameters ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Ft Ir ◽  
Experimental And Theoretical Studies ◽  
Homo Lumo

In this study, 4-[(4-methyl-5-phenyl-4<em>H</em>-1,2,4-triazol-3-yl)sulfanyl]benzene-1,2-dicarbonitrile was synthesized and its molecular structure was characterized by means of FT-IR and X-ray diffraction methods. The crystal is monoclinic and belongs to the P21/n space group. There are three weak intermolecular C-H…N type hydrogen bonds in the molecular structure. The geometrical parameters, vibration frequencies, HOMO–LUMO energies, and molecular electrostatic potential (MEP) map of the compound (3) in ground state were calculated by using density functional theory (DFT/B3LYP) with the 6-311G(d) basis set. Calculated geometrical parameters were compared with X-ray diffraction geometric parameters. On the other hand, theoretical and experimental FT-IR results were also compared.

scholarly journals X-ray diffraction and Density Functional Theory based structural analyses of 2-phenyl-4-(prop-2-yn-1-yl)-1,2,4-triazolone

2021 ◽  
Vol 12 (4) ◽  
pp. 459-468
Author(s):  
Shilpa Mallappa Somagond ◽  
Ahmedraza Mavazzan ◽  
Suresh Fakkirappa Madar ◽  
Madivalagouda Sannaikar ◽  
Shankar Madan Kumar ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Basis Set ◽  
Frontier Molecular Orbital ◽  
Geometrical Parameters ◽  
Monoclinic Space Group ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray

This study is composed of X-ray diffraction and Density Functional Theory (DFT) based molecular structural analyses of 2-phenyl-4-(prop-2-yn-1-yl)-2,4-dihydro-3H-1,2,4-triazol-3-one (2PPT). Crystal data for C11H9N3O: Monoclinic, space group P21/c (no. 14), a = 7.8975(2) Å, b = 11.6546(4) Å, c = 11.0648(3) Å, β = 105.212(2)°, V = 982.74(5) Å3, Z = 4, T = 296.15 K, μ(MoKα) = 0.091 mm-1, Dcalc = 1.346 g/cm3, 13460 reflections measured (5.174° ≤ 2Θ ≤ 64.72°), 3477 unique (Rint = 0.0314, Rsigma = 0.0298) which were used in all calculations. The final R1 was 0.0470 (I > 2σ(I)) and wR2 was 0.1368 (all data). The experimentally determined data was supported by theoretically optimized calculations processed with the help of Hartree-Fock (HF) technique and Density Functional Theory with the 6-311G(d,p) basis set in the ground state. Geometrical parameters (Bond lengths and angles) as well as spectroscopic (FT-IR, 1H NMR, and 13C NMR) properties of 2PPT molecule has been optimized theoretically and compared with the experimentally obtained results. Hirshfeld surface analysis with 2D fingerprinting plots was used to figure out the possible and most significant intermolecular interactions. The electronic characterizations such as molecular electrostatic potential map (MEP) and Frontier molecular orbital (FMO) energies have been studied by DFT/B3LYP approach. The MEP imparted the detailed information regarding electronegative and electropositive regions across the molecule. The HOMO-LUMO energy gap as high as 5.3601 eV was found to be responsible for the high kinetic stability of the 2PPT.

scholarly journals Experimental and theoretical (DFT) studies on poly[octa-μ3-acesulfamato-O,O:N,Oʹ;Oʹ,N:O,O-tetraaquatetrabarium(II)] and poly[octa-μ3-acesulfamato-O,O:N,Oʹ;Oʹ,N:O,O-tetraaquatetrastrontium(II)] complexes

2015 ◽  
Vol 34 (1) ◽  
pp. 105 ◽  
Author(s):  
Hasan İçbudak ◽  
Güneş Demirtaş ◽  
Necmi Dege
Keyword(s):  
Density Functional ◽  
Geometric Parameters ◽  
Molecular Structures ◽  
Frontier Molecular Orbital ◽  
Geometrical Parameters ◽  
Monoclinic Space Group ◽  
Molecular Orbital Calculations ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ir Studies

<p>Two new one-dimensional coordination polymers of barium (II) and strontium (II)-acesulfamato complexes such as [Ba(C<sub>4</sub>H<sub>4</sub>NO<sub>4</sub>S)<sub>2</sub>(H<sub>2</sub>O)]<em><sub>n</sub></em> (1) and [Sr(C<sub>4</sub>H<sub>4</sub>NO<sub>4</sub>S)<sub>2</sub>(H<sub>2</sub>O)]<em><sub>n</sub></em> (2) have been synthesized and their molecular structures were identified by X-ray diffraction technique. Both barium (II) and strontium (II) complexes crystallize in the centrosymmetric monoclinic space group P12<sub>1</sub>/c1 and barium (II) and strontium (II) ions, which are surrounded by O- and N-atoms, have the coordination number of nine. Each complex forms a structure like a polymer extending parallel to the <em>a</em>-axis. The molecular structures of those complexes were stabilized by O―H···O and C―H···O hydrogen bonds.</p>Besides identifying their crystallographic structures, the geometric parameters were also calculated using density functional theory (B3LYP) with 6-31G base sets for the asymmetric units of the complexes. The calculated geometrical parameters were also compared to the geometric parameters of X-ray diffraction technique. Furthermore, molecular electrostatic potential maps were constructed and frontier molecular orbital calculations were done for the synthesized complexes. The results of the experimental and theoretical IR studies were also compared.

scholarly journals Relation between photochromic properties and molecular structures in salicylideneaniline crystals

2012 ◽  
Vol 68 (3) ◽  
pp. 297-304 ◽  
Author(s):  
Kohei Johmoto ◽  
Takashi Ishida ◽  
Akiko Sekine ◽  
Hidehiro Uekusa ◽  
Yuji Ohashi
Keyword(s):  
Dihedral Angle ◽  
Steric Hindrance ◽  
Molecular Structures ◽  
Dihedral Angles ◽  
Clear Correlation ◽  
X Ray Diffraction ◽  
Photochromic Properties ◽  
X Ray ◽  
Benzene Rings ◽  
The Relationship

The crystal structures of the salicylideneaniline derivatives N-salicylidene-4-tert-butyl-aniline (1), N-3,5-di-tert-butyl-salicylidene-3-methoxyaniline (2), N-3,5-di-tert-butyl-salicylidene-3-bromoaniline (3), N-3,5-di-tert-butyl-salicylidene-3-chloroaniline (4), N-3,5-di-tert-butyl-salicylidene-4-bromoaniline (5), N-3,5-di-tert-butyl-salicylidene-aniline (6), N-3,5-di-tert-butyl-salicylidene-4-carboxyaniline (7) and N-salicylidene-2-chloroaniline (8) were analyzed by X-ray diffraction analysis at ambient temperature to investigate the relationship between their photochromic properties and molecular structures. A clear correlation between photochromism and the dihedral angle of the two benzene rings in the salicylideneaniline derivatives was observed. Crystals with dihedral angles less than 20° were non-photochromic, whereas those with dihedral angles greater than 30° were photochromic. Crystals with dihedral angles between 20 and 30° could be either photochromic or non-photochromic. Inhibition of the pedal motion by intra- or intermolecular steric hindrance, however, can result in non-photochromic behaviour even if the dihedral angle is larger than 30°.

scholarly journals Distinctive Supramolecular Features of β-Cyclodextrin Inclusion Complexes with Antidepressants Protriptyline and Maprotiline: A Comprehensive Structural Investigation

2021 ◽  
Vol 14 (8) ◽  
pp. 812
Author(s):  
Thammarat Aree
Keyword(s):  
Inclusion Complexes ◽  
Density Functional ◽  
Water Solubility ◽  
Geometry Optimization ◽  
Binding Constants ◽  
Basis Set ◽  
Full Geometry Optimization ◽  
Basis Set Superposition Error ◽  
X Ray ◽  
Molecular Stability

Depression, a global mental illness, is worsened due to the coronavirus disease 2019 (COVID-2019) pandemic. Tricyclic antidepressants (TCAs) are efficacious for the treatment of depression, even though they have more side effects. Cyclodextrins (CDs) are powerful encapsulating agents for improving molecular stability, water solubility, and lessening the undesired effects of drugs. Because the atomic-level understanding of the β-CD–TCA inclusion complexes remains elusive, we carried out a comprehensive structural study via single-crystal X-ray diffraction and density functional theory (DFT) full-geometry optimization. Here, we focus on two complexes lining on the opposite side of the β-CD–TCA stability spectrum based on binding constants (Kas) in solution, β-CD–protriptyline (PRT) 1—most stable and β-CD–maprotiline (MPL) and 2—least stable. X-ray crystallography unveiled that in the β-CD cavity, the PRT B-ring and MPL A-ring are aligned at a nearly perfect right angle against the O4 plane and primarily maintained in position by intermolecular C–H···π interactions. The increased rigidity of the tricyclic cores is arising from the PRT -CH=CH- bridge widens, and the MPL -CH2–CH2- flexure narrows the butterfly angles, facilitating the deepest and shallower insertions of PRT B-ring (1) and MPL A-ring (2) in the distorted round β-CD cavity for better complexation. This is indicated by the DFT-derived complex stabilization energies (ΔEstbs), although the complex stability orders based on Kas and ΔEstbs are different. The dispersion and the basis set superposition error (BSSE) corrections were considered to improve the DFT results. Plus, the distinctive 3D arrangements of 1 and 2 are discussed. This work provides the first crystallographic evidence of PRT and MPL stabilized in the β-CD cavity, suggesting the potential application of CDs for efficient drug delivery.

A DFT Analysis of the Molecular Structures and Vibrational Spectra of Diphenylsulfone and 4,4'-Sulfonyldianiline (Dapsone)

2011 ◽  
Vol 66 (1) ◽  
pp. 69-76 ◽  
Author(s):  
Wolfgang Förner ◽  
Hassan M. Badawi
Keyword(s):  
Vibrational Spectra ◽  
Density Functional ◽  
Parent Compound ◽  
Harmonic Approximation ◽  
Molecular Structures ◽  
Spectral Lines ◽  
Basis Set ◽  
Minor Role ◽  
Parent Molecule ◽  
Chemical Difference

We have performed density functional calculations with the B3LYP functional and a 6-311G** basis set to obtain the vibrational spectra in harmonic approximation of the anti-leprosy drug Dapsone and the parent compound diphenylsulfone. Although the chemical difference between the two molecules is not that pronounced (Dapsone has amino groups in the para positions in the phenyl rings), Dapsone is an active drug, while to our knowledge diphenylsulfone shows no medical activity. We compared the theoretical results to experimental vibrational spectra found in the literature. With the help of the program GAUSSVIEW we were able to assign the experimentally found spectral lines to specific atomic motions. The remarkable difference between the two molecules, regarding their structural behavior, is that the drug Dapsone has a more flexible structure of the phenyl ring than the parent molecule has. This might contribute to a greater ability of the drug to fit into receptor sites in a cell membrane although one has to be well aware that this plays most propably only a minor role in the drug activity of Dapsone

An Ultimate Investigation on the Adsorption of Amantadine on Pristine and Decorated Fullerenes C59X (X=Si, Ge, B, Al, Ga, N, P, and As): A DFT, NBO, and QTAIM Study

2020 ◽  
pp. 1-17
Author(s):  
Mohsen Doust Mohammadi ◽  
Idris H. Salih ◽  
Hewa Y. Abdullah
Keyword(s):  
Electronic Properties ◽  
Intermolecular Interactions ◽  
Density Functional ◽  
Physical Adsorption ◽  
Single Point ◽  
Basis Set ◽  
Total Density ◽  
Electron Configuration ◽  
Doped Fullerenes ◽  
Donor Acceptor

In this investigation, the feasibility of detecting the amantadine (AMD) molecule onto the outer surface of pristine fullerene (C[Formula: see text]), as well as C[Formula: see text]X ([Formula: see text], Ge, B, Al, Ga, N, P, and As) decorated structures, was carefully evaluated. For achieving this goal, a density functional theory level of study using the HSEH1PBE functional together with a 6-311G(d) basis set has been used. Subsequently, the B3LYP-D3, wB97XD and M062X functionals with a 6-311G(d) basis set were also employed to consider the single point energies. Natural bond orbital (NBO) and the quantum theory of atoms in molecules (QTAIM) were implemented using the B3LYP-D3/6-311G(d) method and the results were compatible with the electronic properties. In this regard, the total density of states (TDOSs), the Wiberg bond index (WBI), natural charge, natural electron configuration, donor–acceptor NBO interactions, and the second-order perturbation energies are performed to explore the nature of the intermolecular interactions. All of the energy calculations and population analyses denote that by adsorbing of the AMD molecule onto the surface of the considered nanostructures, the intermolecular interactions are of the type of strong physical adsorption. Among the doped fullerenes, Ge-doped structure has very high adsorption energy compared to other elements. Generally, it was revealed that the sensitivity of the adsorption will be increased when the AMD molecule interacts with the decorated fullerenes and decrease the HOMO–LUMO band gap; therefore, the change of electronic properties can be used to design suitable nanocarrier.

Twisted Push - Pull Ethylenes

2008 ◽  
Vol 61 (10) ◽  
pp. 805 ◽  
Author(s):  
Rakesh Naduvile Veedu ◽  
Paul V. Bernhardt ◽  
Rainer Koch ◽  
Curt Wentrup
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Room Temperature ◽  
Dihedral Angles ◽  
Functional Theory ◽  
Activation Barriers ◽  
Rapid Rotation ◽  
X Ray ◽  
X Ray Crystallography ◽  
Calculated Activation

As determined by X-ray crystallography, Meldrum’s acid derivatives 5, 6, and 8 feature dihedral angles around the central C5=C7 double bond of 14–35°, whereas for the anion 9 this angle is 90°. Density functional theory and MP2 calculations are in agreement with the experimental X-ray data for compounds 5–8, but for anion 9 an angle of only ~65° is predicted. It is concluded that a part of the torsion is due to packing forces in the crystal. It is further concluded that these molecules undergo rapid rotation about the central CC bonds at room temperature (calculated activation barriers 5–14 kcal mol–1).

Homolytic bond-dissociation enthalpies of tin bonds and tin–ligand bond strengths — A computational study

2009 ◽  
Vol 87 (7) ◽  
pp. 974-983 ◽  
Author(s):  
Sarah R. Whittleton ◽  
Russell J. Boyd ◽  
T. Bruce Grindley
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
Bond Dissociation ◽  
Donor Acceptor ◽  
Bond Strengths ◽  
Moller Plesset ◽  
Effective Core Potentials ◽  
Ligand Bond

Density functional theory and second-order Møller–Plesset perturbation theory with effective core potentials have been used to calculate homolytic bond-dissociation enthalpies, D(Sn–X), of organotin compounds, and their performance has been assessed by comparison with available experimental bond enthalpies. The SDB-aug-cc-pVTZ basis set with its effective core potential was used to calculate the D(Sn–X) of a series of trimethyltin(IV) species, Me3Sn–X, where X = H, CH3, CH2CH3, NH2, OH, Cl, and F. This is the most comprehensive report to date of homolytic Sn–X bond-dissociation enthalpies (BDEs). Effective core potentials are then used to calculate thermodynamic parameters including donor–acceptor bond enthalpies, [Formula: see text], for a series of tin-ligand complexes, L2SnX4 (X = Br or Cl, L = py, dmf, or dmtf), which are compared with previous experimental and nonrelativistic computational results. Based on computational efficiency and accuracy, it is concluded that effective core potentials are appropriate computational methods to examine bonding in organotin systems.

scholarly journals 2-Hetaryl-1,3-tropolones based on five-membered nitrogen heterocycles: synthesis, structure and properties

2015 ◽  
Vol 11 ◽  
pp. 2179-2188 ◽  
Author(s):  
Yury A Sayapin ◽  
Inna O Tupaeva ◽  
Alexandra A Kolodina ◽  
Eugeny A Gusakov ◽  
Vitaly N Komissarov ◽  
...  
Keyword(s):  
Density Functional ◽  
Acetic Acid Solution ◽  
Intramolecular Proton Transfer ◽  
Molecular Structures ◽  
X Ray Diffraction ◽  
Dft Methods ◽  
Functional Theory ◽  
X Ray ◽  
X Ray Crystallography ◽  
Derivatives Of

A series of derivatives of 2-hetaryl-1,3-tropolone (β-tropolone) was prepared by the acid-catalyzed reaction of 2-methylbenzoxazoles, 2-methylbenzothiazoles and 2,3,3-trimethylindoline with 3,4,5,6-tetrachloro-1,2-benzoquinone. The molecular structures of the three representative compounds were determined by X-ray crystallography. In crystal and (as shown by the DFT PBE0/6-311+G** calculations) in solution, 2-hetaryl-4,5,6,7-tetrachloro- and 2-hetaryl-5,6,7-trichloro-1,3-tropolones exist in the NH-tautomeric form with a strong resonance-assisted intramolecular N–H···O hydrogen bond. The mechanism of the formation of 1,3-tropolones in the reaction of methylene-active five-membered heterocycles with o-chloranil in acetic acid solution has been studied using density functional theory (DFT) methods. The reaction of 2-(2-benzoxa(thia)zolyl)-5,6,7-trichloro(4,5,6,7-tetrachloro)-1,3-tropolones with alcohols leads to the contraction of the seven-membered tropone ring with the formation of 2-(2-benzoxa(thia)zolyl)-6-alkoxycarbonylphenols. The molecular structure of 2-(2-ethoxycarbonyl-6-hydroxy-3,4,5-trichlorophenyl)benzoxazole has been determined by X-ray diffraction. 2-(2-Benzoxa(thia)zolyl)-6-alkoxycarbonylphenols display intense green fluorescence with anomalous Stokes shifts caused by the excited state intramolecular proton transfer (ESIPT) effects.

Sign in / Sign up

Export Citation Format

Share Document