scholarly journals Discrete Spectral Local Measurement Method for Testing Solar Concentrators

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Huifu Zhao ◽  
Hua Liu ◽  
Lei Jing ◽  
Ying Liu ◽  
Chun Li ◽  
...  
Keyword(s):  
Measurement Method ◽  
Large Diameter ◽  
Test System ◽  
Test Method ◽  
Divergence Angle ◽  
Local Measurement ◽  
Two Stage ◽  
Indoor Concentration ◽  
Outdoor Concentration ◽  
Concentration Test

In order to compensate for the inconvenience and instability of outdoor photovoltaic concentration test system which are caused by the weather changes, we design an indoor concentration test system with a large caliber and a high parallelism, and then verify its feasibility and scientificity. Furthermore, we propose a new concentration test method: the discrete spectral local measurement method. A two-stage Fresnel concentration system is selected as the test object. The indoor and the outdoor concentration experiments are compared. The results show that the outdoor concentration efficiency of the two-stage Fresnel concentration system is 85.56%, while the indoor is 85.45%. The two experimental results are so close that we can verify the scientificity and feasibility of the indoor concentration test system. The light divergence angle of the indoor concentration test system is 0.267° which also matches with sunlight divergence angle. The indoor concentration test system with large diameter (145 mm), simple structure, and low cost will have broad applications in solar concentration field.

Study of Indoor concentration Test System

2011 ◽  
Vol 31 (6) ◽  
pp. 0622006
Author(s):  
赵会富 Zhao Huifu ◽  
刘华 Liu Hua ◽  
荆雷 Jing Lei ◽  
王尧 Wang Yao ◽  
许文斌 Xu Wenbin ◽  
...  
Keyword(s):  
Test System ◽  
Indoor Concentration ◽  
Concentration Test

Design of Outdoor Concentration Test System

2011 ◽  
Vol 40 (8) ◽  
pp. 1270-1275
Author(s):  
赵会富 ZHAO Hui-fu ◽  
刘华 LIU Hua ◽  
孙强 SUN Qiang ◽  
荆雷 JING Lei ◽  
刘英 LIU Ying ◽  
...  
Keyword(s):  
Test System ◽  
Outdoor Concentration ◽  
Concentration Test

A Test Method of CCD Photoelectric Parameters

2011 ◽  
Vol 317-319 ◽  
pp. 1119-1122
Author(s):  
Nao Sheng Qiao ◽  
Chun Mei Yao ◽  
Yan Li ◽  
Xue Juan Chen
Keyword(s):  
Output Voltage ◽  
Measurement Method ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
The Real ◽  
Real Relation ◽  
Comparison Of The Results ◽  
The Ideal

Until now, no effective method to measure CCD photoelectric parameters. To solve the problem, a novel measurement method that combines hardware with software is proposed, and it can let hardware and software collaborate with each other to finish assignment together. Firstly, the ideal relation between output voltage and input exposure quantity of CCD is given. Secondly, some main photoelectric parameters of CCD are elaborated. Then based on the principle, test system of CCD photoelectric parameters that combines hardware with software is designed. Lastly, the real relation between output voltage and input exposure quantity of CCD is given, and the test results of experiment of each photoelectric parameter are obtained according to the relation. What’s more, analysis and comparison of the results of the experiment are given in this paper. The method is reliable and the precision is high in the experiment.

scholarly journals An Experimental Study of the Feasibility of Identifying the Impact Damages of Reinforced Concrete Piers Using a Modal Frequency Method

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Xiwu Zhou ◽  
Wenchao Zhang ◽  
Yushen Gao ◽  
Guoxue Zhang ◽  
Mengdan Wen
Keyword(s):  
Reinforced Concrete ◽  
Measurement Method ◽  
Test System ◽  
Ultrasonic Waves ◽  
Test Method ◽  
Signal Acquisition ◽  
Frequency Method ◽  
Modal Frequency ◽  
The Impact ◽  
Impact Damages

In this research study, horizontal impact tests were carried out on five reduced scale pier models using China’s most advanced multifunctional ultrahigh heavy drop hammer impact test system and DHDAS dynamic signal acquisition and analysis system. Due to the fact that the traditional measurement method can only be used for local measurement damage, and the volatility is high, this paper proposes a test method for the modal frequency identification of the overall damage of reinforced concrete pier and applies the ultrasonic damage measurement method to verify the results. The tests analyzed the modal frequencies and ultrasonic velocity identifications for the purpose of evaluating the impact damages of bridge piers, as well as the relationship between them. The results showed that the modal frequencies were consistent with the ultrasonic waves in identifying and evaluating the damages to the piers. Also, the modal frequency damage factors were determined to be functions of the ultrasonic wave velocity damage factors. Therefore, the results of this study confirmed that it was feasible to characterize the impact damages of piers using a modal frequency method.

scholarly journals Evaluation of a Preclinical Blood Test for Scrapie in Sheep Using Immunocapillary Electrophoresis

2006 ◽  
Vol 89 (3) ◽  
pp. 720-727 ◽  
Author(s):  
Roy Jackman ◽  
David J Everest ◽  
Mary Jo Schmerr ◽  
Mohammed Khawaja ◽  
Pat Keep ◽  
...  
Keyword(s):  
Capillary Electrophoresis ◽  
Prion Protein ◽  
Clinical Signs ◽  
Test System ◽  
Buffy Coat ◽  
Infected Sheep ◽  
Test Method ◽  
Peptide Sequence ◽  
Transmissible Spongiform Encephalopathies ◽  
Blood Samples

Abstract An analytical method is described for detection of endogenous disease-associated prion protein in the buffy coat fraction from the blood of sheep infected with scrapie. The method has been improved and evaluated for its performance in the preclinical diagnosis of ovine transmissible spongiform encephalopathies. The test system uses a protocol for sample preparation that includes extraction and concentration and a test method that uses a liquid-phase competitive immunoassay for prion protein. Antibodies directed to a peptide sequence at the C-terminus of the prion protein (PrP) and a fluorescein-labeled peptide conjugate are used in the assay. Free zone capillary electrophoresis with laser-induced fluorescence for detection is used to separate the antibody-bound fluorescently labeled peptide and free labeled peptide. In this assay, the PrP competes with the fluorescently labeled peptide for limited antibody binding sites, which results in a reduction of the peak representing the immunocomplex of the antibody bound to the fluorescently labeled peptide. When blood samples from scrapie-infected sheep aged 712 months and of the scrapie-susceptible PrP genotypes VRQ/VRQ and VRQ/ARQ were analyzed, the abnormal PrP was found in blood samples. These results correlated with the post-mortem diagnosis of scrapie. The sheep were preclinical and appeared normal at the time of testing but later died with clinical disease approximately 12 months after testing. In older animals, and those with clinical signs, a smaller percentage of animals tested positive. This study has demonstrated that this technology can be used as a sensitive, rapid preclinical test to detect the disease-associated PrP in the blood of scrapie-infected sheep. Improvements in the extraction protocol and capillary electrophoresis conditions will enhance the robustness of this test.

The Experiment on Soil Water Characteristic Curve Considering the Effect of Urea Concentration

2014 ◽  
Vol 919-921 ◽  
pp. 795-799
Author(s):  
Gai Qing Dai ◽  
Dong Fang Tian ◽  
Yao Ruan ◽  
Lang Tian ◽  
You Le Wang
Keyword(s):  
Water Content ◽  
Soil Water ◽  
Characteristic Curve ◽  
Urea Concentration ◽  
Test Method ◽  
Materials Selection ◽  
Valuable Data ◽  
Soil Water Characteristic Curve ◽  
Concentration Test ◽  
The Impact

A new soil water characteristic curve (SWCC) experiment contemplating urea concentration is presented in the paper. We focus on the impact of the SWCC considering urea concentration test method for materials selection and introduction, experimental results, and finally, we have conducted some experiments of SWCC and obtained some valuable data which could affect urea concentration. By using linear fitting, an exponential function between water content and suction and urea concentration is established.

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

Design on Hierarchical Testing System for Unmanned Ground Vehicles

2011 ◽  
Vol 346 ◽  
pp. 817-822 ◽  
Author(s):  
Xin Li ◽  
Guang Ming Xiong ◽  
Yang Sun ◽  
Shao Bin Wu ◽  
Jian Wei Gong ◽  
...  
Keyword(s):  
Evaluation System ◽  
Test System ◽  
Unmanned Vehicles ◽  
Intelligent Vehicles ◽  
Test Method ◽  
Unmanned Ground Vehicles ◽  
Ground Vehicles ◽  
Test Environment ◽  
Test And Evaluation ◽  
Comprehensive Test

The test system for technical abilities of unmanned vehicles is gradually developed from the single test to comprehensive test. The pre-established test and evaluation system can promote the development of unmanned ground vehicles. The 2009 Future Challenge: Intelligent Vehicles and Beyond (FC’09) pushed China's unmanned vehicles out of laboratories. This paper proposed to design a more scientific and comprehensive test system for future competitions to better guide and regulate the development of China's unmanned vehicles. According to the design idea of stage by stage and level by level, the hierarchical test content from simple to advanced, from local to overall is designed. Then the hierarchic test environment is established according to the levels of test content. The test method based on multi-platform and multi-sensor is put forward to ensure the accuracy of test results. The testing criterion framework is set up to regulate future unmanned vehicle contests and to assess the unmanned vehicles scientifically and accurately.

Plant Constituents Interfering with Human Sex Hormone-Binding Globulin. Evaluation of a Test Method and Its Application to Urtica dioica Root Extracts

1995 ◽  
Vol 50 (1-2) ◽  
pp. 98-104 ◽  
Author(s):  
Dietmar Ganßer ◽  
Gerhard Spiteller
Keyword(s):  
Test System ◽  
Binding Activity ◽  
Urtica Dioica ◽  
Sex Hormone ◽  
Test Method ◽  
Sex Hormone Binding Globulin ◽  
Hormone Binding ◽  
Root Extracts ◽  
Plant Constituents ◽  
Octadecenoic Acids

Abstract A test system is described, which allows the search for compounds interfering with human sex hormone-binding globulin (SHBG) even in complex plant extracts. The method has been evaluated and applied to Urtica dioica root extracts. The lignan secoisolariciresinol (5) as well as a mixture of isomeric (11 E)-9,10,13-trihydroxy-11-octadecenoic and (10 E)-9 ,12,13-trihydroxy-10-octadecenoic acids (3 and 4, resp.) were demonstrated to reduce binding activity of human SHBG. Methylation of the mixture of 3 and 4 increased its activity about 10-fold.

Research on a Test Method of Dynamic Force of Jet Elements

2014 ◽  
Vol 574 ◽  
pp. 154-159 ◽  
Author(s):  
Zhong Yang ◽  
Xiao Xian Yao ◽  
Dong Xu Zhang
Keyword(s):  
Delay Time ◽  
Simple Structure ◽  
Mathematic Model ◽  
Test System ◽  
Processing Method ◽  
Test Method ◽  
Dynamic Force ◽  
Simple Method ◽  
Pendulum Test ◽  
Testing Condition

According to the characteristics of the dynamic force of jet elements, a kind of simple pendulum test system was presented. The dynamic jet force value was obtained indirectly by the acceleration value of the jet element under its force. The mathematic model of the test system was established and the test errors of the amplitude and delay time were analyzed. A processing method of dynamic force test data was presented based on the test curve and the parameters of amplitude and delay time were obtained. The result indicates that the test method can satisfy the testing requirements of dynamic force and it has advantages of simple structure, low demands of testing condition and simple method of data processing.

Sign in / Sign up

Export Citation Format

Share Document