scholarly journals A Compact Multiband Notch UWB Antenna

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
K. Kumar ◽  
N. Gunasekaran
Keyword(s):  
Considerable Increase ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Pass Band ◽  
Uwb Antenna ◽  
Total Size ◽  
Different Types ◽  
Operating Bandwidth ◽  
Peak Gain

A simple and a compact coplanar waveguide (CPW) ultrawide band (UWB) antenna is presented. Multiband stop function is achieved by two different types of band stop resonators. One is a tilted square spiral slot resonator of different size and length etched on the patch and the other is a coupled resonator etched on the ground plane. These resonators provide considerable increase in notch bandwidth at the stop bands. The proposed antenna has a total size of18×20.3 mm2. The designed antenna achieves pass band performance at 1.8–2.1 GHz (15.38%), 3.0–3.2 GHz (6.45%), 4.4–4.7 GHz (6.59%), 6.3-6.4 GHz (1.57%), and 8–11.2 GHz (33.33%) where VSWR <2 and four stop bands at 2.4–2.8 GHz (15.38%), 3.2–3.7 GHz (14.49%), 5.5–6 GHz (8.69%), and 6.5–7 GHz (7.40%) where VSWR is equal to 10. The antenna has a peak gain of 3.8 dBi. The measured results show that the antenna achieves good impedance matching and consistent radiation patterns over an operating bandwidth.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

A CPW-fed stepped slot UWB antenna for MIMO/diversity applications

2015 ◽  
Vol 9 (1) ◽  
pp. 151-162 ◽  
Author(s):  
Raj Kumar ◽  
Neha Pazare
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Slot Antennas ◽  
Capacity Loss ◽  
Field Radiation

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

Compact Design of an UWB Antenna with Dual Band-Notched Characteristic

2012 ◽  
Vol 195-196 ◽  
pp. 13-16
Author(s):  
Wen Bo Zeng ◽  
Jia Zhao ◽  
Bao Zhong Ke ◽  
Qi Qi Wu
Keyword(s):  
Frequency Band ◽  
Printed Circuit Board ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Circuit Board ◽  
Dual Band ◽  
Uwb Antenna ◽  
Compact Design

An ultra-wideband (UWB) printed antenna with dual band-notched characteristic is presented in this paper. The proposed antenna is composed of a semi-circular patch fed by a tapered coplanar waveguide (CPW) and an unclosed ground plane, which are printed onto the same side of a FR4 printed circuit board (PCB) with an overall size of 30 mm × 30 mm × 1.5 mm. By embedding a simple arc-shaped slot in the patch and adding a T-shaped strip on the top of the patch, two notched frequency bands for rejection of WiMAX and WLAN system can be realized. The characteristics of the proposed antenna are investigated by using the software HFSS and validated experimentally, both simulated and measured results show that the proposed antenna prototype achieves good impedance matching over an frequency band from 2.1011.40 GHz for VSWR2 with two notched bands over the frequency range of 5-5.95 GHz and 3.1-3.9 GHz. Furthermore, a relatively stable gain and suitable radiation patterns are also achieved in both lower and upper UWB frequency band.

scholarly journals A Novel CPW-Fed UWB Antenna with Band-Stop Function

2014 ◽  
Vol 2014 ◽  
pp. 1-8
Author(s):  
Huaming Chen ◽  
Zhengrong Li ◽  
Baiyu Li ◽  
Guangfu Sun
Keyword(s):  
Wireless Communication ◽  
Frequency Band ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Satellite Applications

A novel coplanar waveguide-fed (CPW) ultrawideband (UWB) antenna with band-stop function is presented in this paper. The proposed antenna comprises a CPW-fed slot rectangular patch with an open stub ground plane, and two inverted L-shaped strip conductors are fabricated on the back plane. The overall size of the antenna is 25 × 25 × 1.6 mm2, and it achieves good impedance matching and radiation gain. Simulated and measured results show that the designed antenna operates at 2.9 GHz–13.08 GHz with band rejection in the frequency band of 7.7 GHz–9.05 GHz for satellite applications, and the proposed antenna is suitable for UWB wireless communication applications.

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

scholarly journals A Wideband Circular Polarized Antenna using Coplanar Waveguide

2019 ◽  
Vol 8 (6S4) ◽  
pp. 587-589
Keyword(s):  
Circular Polarization ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Feed Line ◽  
Polarization Characteristics ◽  
Orthogonal Phase

A wideband coplanar waveguide (CPW) antenna with circular polarization characteristics using modified ground slot is studied in this work. Proposed design incorporates a hexagonal slot instead of rectangular slot, accounting for enhanced impedance matching. This ground slot is energized by a 50Ω feed line, resulting in excitation of two orthogonal phase quadrature modes (even-odd modes). Thus, fulfilling the essential criteria required for realizing circular polarization. A narrow horizontal slit (lg) is embedded in the ground plane at immediate left of feed line, accounting for wideband characteristics. 10dB impedance bandwidth of proposed antenna extends from 2.65- 5.60 GHz, while 3dB axial ratio bandwidth extends from 3.90- 5.80 GHz. Hence, overlapping bandwidth of proposed antenna extends from 3.90 - 5.60 GHz. RHCP characteristics with monopole radiation pattern makes proposed antenna useful for WLAN, radio navigation and radiolocation applications.

scholarly journals Design of a 1×2 CPW Fractal Antenna Array on Plexiglas Substrate with Defected Ground Plane for Telecommunication Applications

2021 ◽  
Vol 11 (6) ◽  
pp. 7897-7903
Author(s):  
C. Ben Nsir ◽  
J. M. Ribero ◽  
C. Boussetta ◽  
A. Gharsallah
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Systems Design ◽  
Fractal Antenna ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Telecommunication Systems ◽  
Attractive Candidate

In this paper, a fractal antenna array for telecommunication applications is presented. The proposed antenna array is realized on a Plexiglas substrate, has 1×2 radiating elements, and dimensions of 170mm×105mm. The antenna array is composed of two Koch Snowflake patches and is fed by a Coplanar Waveguide (CPW) transmission line. Radiating elements and the ground plane are printed on the top side of the substrate. Defected Ground Structure (DGS) technique is employed to enhance the bandwidth and improve the impedance matching. The proposed antenna array operates at two frequency bands, 1.08-1.32GHz covering the GPS band and 1.7-3.7GHz covering the GSM 1800/1900, UTMS, Bluetooth, LTE, and WiMAX bands. In addition, the antenna has a good performance with efficiency and peak gain of 82% and 6.3dB respectively. These characteristics allow the antenna to be an attractive candidate for telecommunication systems. Design and analysis of different structures were carried out with Ansys HFSS.

scholarly journals Compact Enhanced CPW-Fed Antenna for UWB Applications

2021 ◽  
Vol 10 (1) ◽  
pp. 15-20
Author(s):  
H. Abdi ◽  
J. Nourinia ◽  
C. Ghobadi
Keyword(s):  
Low Cost ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Compact Antenna ◽  
Low Profile ◽  
Rectangular Slit ◽  
Operating Bandwidth ◽  
Uwb Applications ◽  
Operational Range

This paper presents a compact antenna with co-planar waveguide (CPW) feed line for ultra-wideband (UWB) applications. The proposed antenna consists of a beveled radiating patch with wide rectangular slit at its upper side and a partial ground plane with insertion of symmetrically two-step beveled tapers at its center and sides, which provides a wide operating bandwidth. The antenna is integrated with narrow rectangular-shaped parasitic elements with different lengths placed adjacent to radiant patch to significantly enhance the impedance matching and bandwidth, especially at the upper frequencies. The measured results show an |S11| less than -10 dB bandwidth of 2.5-19.8 GHz with 155% fractional bandwidth. Simulation results are in good agreement with experimental measurements, which exhibits the validity of the proposed design approach. Moreover, the proposed CPW-fed antenna shows omnidirectional radiation patterns with stable gain within the operational range. The proposed compact antenna with low profile, light weight, large frequency bandwidth, ease of fabrication and low cost material is suitable for UWB applications.

scholarly journals Metamaterial Inspired Gain Enhanced Elliptical Curved CPW fed Multiband Antenna for Medical and Wireless Communication Applications

2019 ◽  
Vol 12 (2) ◽  
pp. 729-737
Author(s):  
M. Purna Kishore ◽  
B. T. P. Madhav ◽  
S. S. Mohan Reddy
Keyword(s):  
Satellite Communication ◽  
Electromagnetic Coupling ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Medical Application ◽  
Satellite System ◽  
Ieee 802.11A ◽  
X Band ◽  
Efficiency Parameter ◽  
Peak Gain

This article presents a novel elliptical curved coplanar waveguide fed antenna with defected ground. Electromagnetic coupling between splitring resonator (SRR) on other side to the substrate to CPW feeding line on the top side resulting the frequency notches in the wideband. The SRR shaped etched portion in the ground plane not only miniaturizing the antenna, but also providing good bandwidth in the operating bands. Antenna providing multiband characteristics for PCS, Bluetooth, LTE, ISM (Medical Application Band) and Wi-Fi communication (2-3.6 GHz), WLAN IEEE 802.11a/h/j/n (4.5-5.825 GHz), satellite system X-band downlink (7.5-9 GHz) and satellite communication applications at (12-16 GHz) & (17.5-18.5 GHz) respectively. This antenna offering quad band notching with penta band operation from 2-20 GHz. The size of the antenna is 40X44X1.6 mm with peak gain value of 7.18 dB with average efficiency parameter more than 68%. The manufactured antenna prototype is tested for validation and the obtained measurement matching with respect to the optimized simulation result.

scholarly journals A CPW-fed Irregular Shaped Hexagonal Patch Antenna with Elliptical Substrate for UWB Applications

2019 ◽  
Vol 9 (2) ◽  
pp. 373-376
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Total Efficiency ◽  
Uwb Antenna ◽  
Radiation Characteristics ◽  
Wide Range ◽  
Uwb Applications ◽  
Novel Design ◽  
Peak Gain

A novel design of Ultra-Wideband (UWB) antenna with irregularly shaped hexagonal patch built on the elliptical-shaped FR-4 laminate with εr = 4.3 and tanδ = 0.025 is presented. The feed mechanism utilized in the structure proposed is modified co-planar waveguide (CPW), the feeding microstrip is tapered near the connecting edge of the patch for better impedance matching. The proposed antenna is compared with the traditional rectangular substrate and found that the elliptical substrate enhances the radiation characteristics of the antenna and is capable of functioning effectively in the range of 3.1 GHz-11.7 GHz, accompanied by the total efficiency > 86% across the whole FCC allocated UWB operating band. The antenna can be used for wide range of UWB applications as it exhibits good omnidirectional characteristics with a realized peak gain of 4.178dB and an average realized gain of 3.063dB. The simulation work of the antenna is accomplished using CST Studio (v. 2014).

Sign in / Sign up

Export Citation Format

Share Document