scholarly journals Modeling Small Scale Solar Powered ORC Unit for Standalone Application

2012 ◽  
Vol 2012 ◽  
pp. 1-10 ◽  
Author(s):  
Enrico Bocci ◽  
Mauro Villarini ◽  
Luca Bove ◽  
Stefano Esposto ◽  
Valerio Gasperini
Keyword(s):  
Power Generation ◽  
Ad Hoc ◽  
Rankine Cycle ◽  
External Support ◽  
Working Fluid ◽  
Small Scale ◽  
Technical Solution ◽  
Solar Panels ◽  
Under Construction ◽  
Photovoltaic Generators

When the electricity from the grid is not available, the generation of electricity in remote areas is an essential challenge to satisfy important needs. In many developing countries the power generation from Diesel engines is the applied technical solution. However the cost and supply of fuel make a strong dependency of the communities on the external support. Alternatives to fuel combustion can be found in photovoltaic generators, and, with suitable conditions, small wind turbines or microhydroplants. The aim of the paper is to simulate the power generation of a generating unit using the Rankine Cycle and using refrigerant R245fa as a working fluid. The generation unit has thermal solar panels as heat source and photovoltaic modules for the needs of the auxiliary items (pumps, electronics, etc.). The paper illustrates the modeling of the system using TRNSYS platform, highlighting standard and “ad hoc” developed components as well as the global system efficiency. In the future the results of the simulation will be compared with the data collected from the 3 kW prototype under construction in the Tuscia University in Italy.

Investigation on Solar-Powered Turbines Using Refrigerant R-134A

2014 ◽  
Author(s):  
Jihad Rishmany ◽  
Michel Daaboul ◽  
Issam Tawk ◽  
Nicolas Saba
Keyword(s):  
Power Generation ◽  
Solar Energy ◽  
Fossil Fuels ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Small Scale ◽  
Combustion Gases ◽  
Water Heaters ◽  
Wide Range ◽  
R 134A

Renewable energy has become a promising solution to substitute fossil fuels in power generation. In particular, the use of solar energy is stretched to a wide range of applications, e.g. photovoltaic cells, solar water heaters, solar space heating, solar thermal plants. However, the combination of solar energy with the Rankine cycle is limited to few applications only. In this context, this study aims in investigating the practicality of employing solar heaters to operate a Rankine cycle for small scale power generation. The working fluid in this study is refrigerant R-134a. Sizing and calculations of the various components of the system are carried out based on a net output power of 1 kW. In comparison with available electricity sources in Lebanon, it was found that the proposed system is currently more expensive than public electricity. However, it can compete with private generators that currently fill the gap in electricity shortage. The main advantage herein lies in the friendly environmental load due to the absence of combustion gases.

scholarly journals Comparative Analysis of Small-Scale Integrated Solar ORC-Absorption Based Cogeneration Systems

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 946
Author(s):  
Xiaoqiang Hong ◽  
Feng Shi
Keyword(s):  
Power Generation ◽  
Energy Efficiency ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Energy Performance ◽  
Primary Energy ◽  
Working Fluid ◽  
Small Scale ◽  
Cascade System ◽  
Cooling Mode

This paper aims to present a comparative study into the cascade and series configurations of the organic Rankine cycle based small-scale solar combined cooling, heating and power system for civil application. The energy performance of the systems is studied by developing a thermodynamic model. The simulation model is validated using the literature results. Analyses of the research results indicated that the cascade system can achieve maximum value of the primary energy efficiency of 13.4% for cooling and power generation under solar collecting temperature of 115 °C in cooling mode. The cascade system has more cooling output and less electricity output in cooling mode compared with the series system. In heating mode, the single solar organic Rankine cycle (ORC) operation can achieve highest primary energy efficiency of 19.6% for heating and power generation under solar collecting temperature of 100 °C. Systems with R141b as ORC working fluid show better performance than those with R123 and R1233zd(E).

Geothermal Energy for Small-Scale Power Generation Using an Organic Rankine Cycle

2012 ◽  
Author(s):  
Mir Akbar Hessami
Keyword(s):  
Power Generation ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Hot Water ◽  
Working Fluid ◽  
Experimental Investigations ◽  
Small Scale ◽  
Experimental Facility ◽  
Geothermal Heat ◽  
Brazed Plate Heat Exchangers

Geothermal power generation is achieved by feeding the harnessed geothermal heat into the boiler of an ORC (Organic Rankine Cycle) based engine which uses an organic working fluid characterised by its low boiling temperature. For the purpose of this study, such a system was designed, built and operated to verify the concept of small-scale power generation using heat from a low temperature source. This experimental facility used hot water as the source of heat, brazed plate heat exchangers as the boiler and the condenser, an automotive inline fuel pump for circulation and a Scroll compressor operated in reverse to act as the expander. The working fluid was R245fa with a boiling point of 80°C at a pressure of 790kPa (or 40°C at 250kPa). A Prony Brake was fitted on the shaft of the expander to determine its power output. Experimental investigations found that ∼600W of power could be produced under optimum conditions at a rotational speed of ∼2000RPM. The details of the experimental facility as well as the results of the experiments are provided in this paper.

1-D Model Analysis of Tesla Turbine for Small Scale Organic Rankine Cycle (ORC) System

2017 ◽  
Author(s):  
Jian Song ◽  
Chun-wei Gu
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Organic Rankine Cycle ◽  
Axial Flow ◽  
Rankine Cycle ◽  
Expansion Ratio ◽  
Working Fluid ◽  
Small Scale ◽  
Low Grade ◽  
D Model

Energy shortage and environmental deterioration are two crucial issues that the developing world has to face. In order to solve these problems, conversion of low grade energy is attracting broad attention. Among all of the existing technologies, Organic Rankine Cycle (ORC) has been proven to be one of the most effective methods for the utilization of low grade heat sources. Turbine is a key component in ORC system and it plays an important role in system performance. Traditional turbine expanders, the axial flow turbine and the radial inflow turbine are typically selected in large scale ORC systems. However, in small and micro scale systems, traditional turbine expanders are not suitable due to large flow loss and high rotation speed. In this case, Tesla turbine allows a low-cost and reliable design for the organic expander that could be an attractive option for small scale ORC systems. A 1-D model of Tesla turbine is presented in this paper, which mainly focuses on the flow characteristics and the momentum transfer. This study improves the 1-D model, taking the nozzle limit expansion ratio into consideration, which is related to the installation angle of the nozzle and the specific heat ratio of the working fluid. The improved model is used to analyze Tesla turbine performance and predict turbine efficiency. Thermodynamic analysis is conducted for a small scale ORC system. The simulation results reveal that the ORC system can generate a considerable net power output. Therefore, Tesla turbine can be regarded as a potential choice to be applied in small scale ORC systems.

Performance Evaluation of a Small Scale High Efficiency Cogeneration System

2006 ◽  
Author(s):  
Mauro Reini
Keyword(s):  
High Efficiency ◽  
Pressure Ratio ◽  
Organic Rankine Cycle ◽  
Thermodynamic Cycle ◽  
Rankine Cycle ◽  
Combined Cycle ◽  
Working Fluid ◽  
Small Scale ◽  
Performance Parameters ◽  
Cogeneration System

In recent years, a big effort has been made to improve microturbines thermal efficiency, in order to approach 40%. Two main options may be considered: i) a wide usage of advanced materials for hot ends components, like impeller and recuperator; ii) implementing more complicated thermodynamic cycle, like combined cycle. In the frame of the second option, the paper deals with the hypothesis of bottoming a low pressure ratio, recuperated gas cycle, typically realized in actual microturbines, with an Organic Rankine Cycle (ORC). The object is to evaluate the expected nominal performance parameters of the integrated-combined cycle cogeneration system, taking account of different options for working fluid, vapor pressure and component’s performance parameters. Both options of recuperated and not recuperated bottom cycles are discussed, in relation with ORC working fluid nature and possible stack temperature for microturbine exhaust gases. Finally, some preliminary consideration about the arrangement of the combined cycle unit, and the effects of possible future progress of gas cycle microturbines are presented.

Novel Parabolic Trough Collectors Driving a Small-Scale Organic Rankine Cycle System

2007 ◽  
Author(s):  
P. Kohlenbach ◽  
S. McEvoy ◽  
W. Stein ◽  
A. Burton ◽  
K. Wong ◽  
...  
Keyword(s):  
Steel Substrate ◽  
Low Cost ◽  
Sheet Steel ◽  
Organic Rankine Cycle ◽  
Glass Tube ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Small Scale ◽  
Inlet Temperature ◽  
Parabolic Trough

This paper presents component performance results of a new parabolic trough collector array driving an organic Rankine cycle (ORC) power generation system. The system has been installed in the National Solar Energy Centre at CSIRO Energy Technology in Newcastle, NSW, Australia. It consists of four rows of 18 parabolic mirrors each in a 2×2 matrix with a total aperture area of approximately 132m2. The absorber tube is a laterally aligned, 40mm copper tube coated with a semi-selective paint and enclosed in a 50mm non-evacuated glass tube to reduce convection losses. The mirror modules, which are light-weight and robust, are made from thin low iron back silvered glass bonded to a sheet steel substrate. They are supported by a box truss on semi circular hoops running on rollers for single axis tracking. The mirror design has been chosen to allow low-cost manufacturing as well as simple commissioning and operation. The ORC unit is a FP6 unit sourced from Freepower Ltd. with a net power output of 6kWel at 180°C inlet temperature and a total heat input of 70 kWth. It uses a two-stage expansion process with hydrofluoroether as the working fluid. A wet cooling tower is used to dissipate the reject heat from the ORC. The two key components of the envisioned system are the trough reflector/receiver and the ORC unit. The optical performance of the mirror elements was investigated with regard to the flux mapping onto the receiver tube. The ORC unit has been tested separately using an electrical oil heater as the heat source. This paper presents results for irradiation capture and intensity over the receiver width of a single trough mirror module. The complete system including trough collectors and ORC has not been in transient operation yet, thus experimental steady-state results of the ORC unit are presented.

scholarly journals Combined Closed Cycle (C3) Systems for Underwater Power Generation

1992 ◽  
Author(s):  
Aristide Massardd ◽  
Gian Marid Arnulfi
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Primary Energy ◽  
Combined Cycle ◽  
Working Fluid ◽  
Mass Reduction ◽  
Efficiency Increase

In this paper three Closed Combined Cycle (C3) systems for underwater power generation are analyzed. In the first, the waste heat rejected by a Closed Brayton Cycle (CBC) is utilized to heat the working fluid of a bottoming Rankine Cycle; in the second, the heat of a primary energy loop fluid is used to heat both CBC and Rankine cycle working fluids; the third solution involves a Metal Rankine Cycle (MRC) combined with an Organic Rankine Cycle (ORC). The significant benefits of the Closed Combined Cycle concepts, compared to the simple CBC system, such as efficiency increase and specific mass reduction, are presented and discussed. A comparison between the three C3 power plants is presented taking into account the technological maturity of all the plant components.

scholarly journals Addressing Industrial Waste Heat Supply Variability With Organic Rankine Cycle Systems Incorporating Thermal Energy Storage

2021 ◽  
Author(s):  
Bipul Krishna Saha ◽  
Basab Chakraborty ◽  
Rohan Dutta
Keyword(s):  
Power Generation ◽  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Power Plants ◽  
Waste Heat ◽  
Organic Rankine Cycle ◽  
Rankine Cycle ◽  
Working Fluid ◽  
Low Grade

Abstract Industrial low-grade waste heat is lost, wasted and deposited in the atmosphere and is not put to any practical use. Different technologies are available to enable waste heat recovery, which can enhance system energy efficiency and reduce total energy consumption. Power plants are energy-intensive plants with low-grade waste heat. In the case of such plants, recovery of low-grade waste heat is gaining considerable interest. However, in such plants, power generation often varies based on market demand. Such variations may adversely influence any recovery system's performance and the economy, including the Organic Rankine Cycle (ORC). ORC technologies coupled with Cryogenic Energy Storage (CES) may be used for power generation by utilizing the waste heat from such power plants. The heat of compression in a CES may be stored in thermal energy storage systems and utilized in ORC or Regenerative ORC (RORC) for power generation during the system's discharge cycle. This may compensate for the variation of the waste heat from the power plant, and thereby, the ORC system may always work under-designed capacity. This paper presents the thermo-economic analysis of such an ORC system. In the analysis, a steady-state simulation of the ORC system has been developed in a commercial process simulator after validating the results with experimental data for a typical coke-oven plant. Forty-nine different working fluids were evaluated for power generation parameters, first law efficiencies, purchase equipment cost, and fixed investment payback period to identify the best working fluid.

Sign in / Sign up

Export Citation Format

Share Document