scholarly journals Kinetics and Equilibrium Studies on the Sorption of Manganese(II) and Nickel(II) onto Kaolinite and Bentonite

2011 ◽  
Vol 8 (1) ◽  
pp. 373-385 ◽  
Author(s):  
B. Sathyanarayana ◽  
K. Seshaiah
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Equilibrium Studies ◽  
Batch Mode ◽  
Mode Effect ◽  
Pseudo Second Order ◽  
Sorption Potential ◽  
Peak Value

The sorption of manganese(II) and nickel(II) onto two adsorbents, kaolinite and bentonite from aqueous solution was studied in batch mode. Effect of pH, contact time, adsorbent dose, and initial metal ion concentration on adsorption was investigated. The adsorbents exhibit good sorption potential for manganese(II) and nickel(II) with a peak value at pH 5 and pH 6 respectively. More than 70% sorption occurred within 20 min for manganese(II) and nickel(II) and equilibrium was attained at 90 min. for manganese(II) and 120 min for nickel(II). Freundlich and Langmuir's mathematical models were used to describe batch adsorption. The adsorption was found to be favourable with respect to both the isotherms. The adsorption of the two metal ions from aqueous solution onto two adsorbents followed pseudo-second order kinetics.

scholarly journals Sequestration of Pb(II) and Ni(II) ions from aqueous solution using microalga Rhizoclonium hookeri: adsorption thermodynamics, kinetics, and equilibrium studies

2016 ◽  
Vol 7 (2) ◽  
pp. 214-227 ◽  
Author(s):  
S. Suganya ◽  
A. Saravanan ◽  
P. Senthil Kumar ◽  
M. Yashwanthraj ◽  
P. Sundar Rajan ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Adsorption Process ◽  
Second Order ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Equilibrium Studies ◽  
Adsorption Mode ◽  
Monolayer Adsorption ◽  
Pseudo Second Order

In the present study, the microalga Rhizoclonium hookeri (RH) was effectively applied to remove the metal ions [Pb(II) and Ni(II)] from aqueous solution in batch adsorption mode experiments. The adsorption process was influenced by several operating parameters such as initial metal ion concentration, contact time, pH, particle size, adsorbent dose, and temperature. The maximum monolayer adsorption capacity of the RH was found to be 81.7 mg g−1 and 65.81 mg g−1 for Pb(II) and Ni(II) ions, respectively, at optimum conditions. The calculated thermodynamic parameters illustrated that the adsorption process was found to be spontaneous and endothermic in nature. Experimental data were analyzed in terms of pseudo-first order, pseudo-second order, and Elovich kinetic models. The results showed that the removal of Pb(II) and Ni(II) ions followed the pseudo-second order kinetics. The adsorption isotherm data were described using two and three parameter models. The results indicate that the adsorption data were best fitted with the Sips isotherm model. Consequently, the microalga RH with good adsorbability and reusability could be used as an effective adsorbent for the adsorption of Pb(II) and Ni(II) ions from wastewater.

scholarly journals Ricinus CommunisPericarp Activated Carbon Used as an Adsorbent for the Removal of Ni(II) From Aqueous Solution

2008 ◽  
Vol 5 (4) ◽  
pp. 761-769 ◽  
Author(s):  
S. Madhavakrishnan ◽  
K. Manickavasagam ◽  
K. Rasappan ◽  
P. S. Syed Shabudeen ◽  
R. Venkatesh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Activated Carbon ◽  
Contact Time ◽  
Metal Ion ◽  
Ricinus Communis ◽  
Ion Concentration ◽  
Batch Mode ◽  
Adsorption Data ◽  
Initial Ph

Activated carbon prepared from Ricinus communis Pericarp was used to remove Ni(II) from aqueous solution by adsorption. Batch mode adsorption experiments are carried out by varying contact time, metal-ion concentration, carbon concentration and pH to assess kinetic and equilibrium parameters. The adsorption data were modeled by using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity (Qo) calculated from the Langmuir isotherm was 31.15 mg/g of activated carbon at initial pH of 5.0±0.2 for the particle size 125-250 µm.

Chelating modified cellulose bearing pendant heterocyclic moiety for effective removal of heavy metals

2019 ◽  
Vol 80 (8) ◽  
pp. 1549-1561
Author(s):  
R. Saravanan ◽  
R. Mahalakshmi ◽  
M. S. Karthikeyan ◽  
L. Ravikumar
Keyword(s):  
Metal Ion ◽  
Ion Concentration ◽  
Batch Mode ◽  
Effective Removal ◽  
Removal Of Heavy Metals ◽  
Intra Particle Diffusion ◽  
Functional Factors ◽  
Pseudo Second Order ◽  
Heterocyclic Moiety ◽  
Maximum Removal

Abstract Cellulose bearing pendant Schiff base with heterocyclic chelating groups (CMC-Bz) was synthesized, which were fully characterized using various instrumental techniques such as solid state carbon-13 nuclear magnetic resonance (13C-NMR), Fourier transform infrared (FTIR), scanning electron microscope (SEM) and energy dispersive X-ray analysis (EDX) spectra. The adsorption of toxic metals onto cellulosic material was tested in a batch mode operation. The adsorption functional factors such as pH, adsorbent dose, metal ion concentration, equilibrium time and temperature were experimentally optimized for the maximum removal of Cu(II) and Pb(II) ions. Adsorption isotherms were evaluated with Langmuir, Freundlich, Temkin and Redlich–Peterson isotherms. Kinetic parameters and equilibrium adsorption capacities were investigated for pseudo-first-order, pseudo-second-order and intra-particle diffusion models. Thermodynamic parameters and reusability were also evaluated.

Removal of Mn(II) from Aqueous Solution Using Saponified Garlic Peel

2014 ◽  
Vol 694 ◽  
pp. 382-386 ◽  
Author(s):  
Bo Liang ◽  
Wan He Zhao ◽  
Kai Huang ◽  
Hong Min Zhu
Keyword(s):  
Metal Ion ◽  
Chemical Properties ◽  
Correlation Coefficients ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Physical And Chemical ◽  
Garlic Peel

The removal of Mn (II) ion by saponified garlic peel (S-GP) was investigated using batch adsorption. SEM and FT-IR were employed to investigate the physical and chemical properties of S-GP. The adsorption was evaluated as a function of initial metal ion concentration, contact time and temperature. The maximum adsorption capacity for Mn (II) was 0.51 mol/kg, and the adsorption process followed the Langmuir model. Pseudo-second-order models fitted the experimental data well and kinetic parameters, rate constants, equilibrium sorption capacity and related correlation coefficients at various temperatures were calculated and discussed. A possible adsorption mechanism based on a cation exchange was proposed for the adsorption of Mn (II).

scholarly journals Optimization of multiple parameters for adsorption of arsenic (III) from aqueous solution using Psidium guajava leaf powder

2021 ◽  
Author(s):  
Uma Sankar Behera ◽  
Prakash Chandra Mishra ◽  
G. B. Radhika
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Metal Ion ◽  
Psidium Guajava ◽  
Ion Concentration ◽  
Adsorption Parameters ◽  
Batch Mode ◽  
Equilibrium Study ◽  
Multiple Parameters ◽  
Desorption Study

Abstract The conventional method of water treatment using activated carbon from several sources has been focused extensively since the last two decades. However, rare attention has been noticed on natural adsorbents such as plant leaves. Therefore, the Psidium guajava (Guava) leaf has been investigated to understand it's adsorption efficacy for Arsenic (III) [As(III)] in this study. The effect of process variables, e.g., pH, concentration of metal ion, adsorbent's particle size, and dosages, are evaluated. Experiments are carried out in batch mode, and the individual and combined parameter's impact on adsorption have been discussed. Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) is used to characterize the adsorbent's surface. Freundlich and Langmuir's isotherms are used for adsorption equilibrium study. The adsorption parameters are optimized by establishing a regression correlation using central composite design (CCD) of response surface methodology (RSM). The analysis of variance (ANOVA) suggests a high regression coefficient (R2 = 0.9249) for the removal of As(III). Particle size of 0.39 mm; adsorbent's height of 10 cm; metal ion concentration of 30 ppm, and pH 6 are optimized to remove 90.88% As(III) from aqueous solution. HCl is evaluated as a potential solvent for desorption of arsenic from desorption study.

scholarly journals (3-Aminopropyl) Triethoxysilane (APTES) Functionalized Magnetic Nanosilica Graphene Oxide (MGO) Nanocomposite for the Comparative Adsorption of the Heavy Metal (Pb(II), Cd(II) and Ni(II)) ions from Aqueous Solution

2021 ◽  
Author(s):  
C Donga ◽  
S Mishra ◽  
A Aziz ◽  
L Ndlovu ◽  
A Kuvarega ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Graphene Oxide ◽  
Metal Ion ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Solution Ph ◽  
Magnetic Graphene Oxide ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Equilibrium Data

Abstract (3-aminopropyl) triethoxysilane (APTES) modified magnetic graphene oxide was synthesized and applied in the adsorption of three heavy metals, Pb(II), Cd(II) and Ni(II) from aqueous solution. An approach to prepare magnetic GO was adopted by using (3-aminopropyl) triethoxysilane (APTES) as a functionalizing agent on magnetic nanosilica coupled with GO to form the Fe3O4@SiO2-NH2/GO nanocomposite. FT-IR, XRD, BET, UV, VSM, SAXS, SEM and TEM were used to characterize the synthesized nanoadsorbents. Batch adsorption studies were conducted to investigate the effect of solution pH, initial metal ion concentration, adsorbent dosage and contact time. The maximum equilibrium time was found to be 30 min for Pb(II), Cd(II) and 60 min for Ni(II). The kinetics studies showed that the adsorption of Pb(II), Cd(II) and Ni(II) onto Fe3O4@SiO2-NH2/GO followed the pseudo-second-order kinetics. All the adsorption equilibrium data were well fitted to Langmuir isotherm model and maximum monolayer adsorption capacity for Pb(II), Cd(II) and Ni(II) were 13.46, 18.58 and 13.52 mgg-1, respectively. The Fe3O4@SiO2-NH2/GO adsorbents were reused for at least 7 cycles without the leaching of mineral core, showing the enhanced stability and potential application of Fe3O4@SiO2-NH2/GO adsorbents in water/wastewater treatment.

scholarly journals Preparation and characterization of chitosan/Fe2O3 nano composite for the adsorption of thorium (IV) ion from aqueous solution

2018 ◽  
Vol 78 (3) ◽  
pp. 708-720 ◽  
Author(s):  
B. Rouhi Broujeni ◽  
A. Nilchi ◽  
A. H. Hassani ◽  
R. Saberi
Keyword(s):  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Metal Ion ◽  
Ion Concentration ◽  
P Value ◽  
X Ray Diffraction ◽  
Nano Composite ◽  
Statistical Measures ◽  
Pseudo Second Order

Abstract In this study, novel chitosan/Fe2O3nano composite Ch/Fe-Onc was synthesized and evaluated as an adsorbent for removing thorium (IV) (Th4+) ion from aqueous solution. The Ch/Fe-Onc was characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR) and scanning electron microscopy (SEM). Response surface methodology (RSM) was used in the optimization of Th4+ adsorption for parameters such as pH, the initial metal ion concentration (Th4+ concentration) and contact time. The statistical measures (i.e. analysis of variance, R2, the lack of fit test and the P value) specify that the developed model is proper. Furthermore, the adsorption kinetics was well defined by the pseudo-second-order equation, while the adsorption isotherms were better fitted by the Langmuir model. The adsorption capacity of Ch/Fe-Onc was 430 mg Th4+g−1 composite which leads to 99% removal at 25 °C. Moreover, thermodynamic parameters which state the natural and endothermic nature of the reactions were determined. The loaded Th4+ can be easily regenerated with HNO3 and the Ch/Fe-Onc can be used repeatedly without any significant reduction in its adsorption capacity. The desorption level of Th4+ from the Ch/Fe-Onc by using 0.1 M HNO3, was more than 95%.

Application of black walnut (Juglans nigra) husk for the removal of lead (II) ion from aqueous solution

2017 ◽  
Vol 75 (10) ◽  
pp. 2454-2464 ◽  
Author(s):  
O. S. Lawal ◽  
O. S. Ayanda ◽  
O. O. Rabiu ◽  
K. O. Adebowale
Keyword(s):  
Aqueous Solution ◽  
Entropy Change ◽  
Second Order ◽  
Black Walnut ◽  
Juglans Nigra ◽  
Ion Concentration ◽  
Batch Adsorption ◽  
Standard Entropy ◽  
Adsorption Model ◽  
Pseudo Second Order

The biosorption characteristics of Pb (II) ions from aqueous solution using black walnut (Juglans nigra) seed husk (WSH) biomass were investigated using batch adsorption techniques. The effects of pH, contact time, initial Pb (II) ion concentration, and temperature were studied. The Langmuir, Freundlich and Temkin isotherms were used to analyze the equilibrium data. It was found that the adsorption of Pb (II) ions onto WSH was best described by the Freundlich adsorption model. Biosorption kinetics data were tested using the pseudo-first order and pseudo-second order models, and it was observed that the kinetics data fitted the pseudo-second order model. Thermodynamic parameters such as standard Gibbs free energy change (ΔG0), standard enthalpy change (ΔH0) and standard entropy change (ΔS0) were evaluated. The result showed that biosorption of Pb (II) ions onto WSH was spontaneous and endothermic in nature. The FTIR study showed that the following functional groups: O-H, C = O, C-O, C-H and N-H were involved in binding Pb (II) ions to the biomass.

scholarly journals Isothermal, kinetics and thermodynamics studies of the biosorption of Pb(II) ion from aqueous solution using the scale of croaker fish (Genyonemus lineatus)

2013 ◽  
Vol 3 (3) ◽  
pp. 239-248
Author(s):  
Mojisola O. Nkiko ◽  
Abideen I. Adeogun ◽  
N. A. Adesola Babarinde ◽  
Oluwabunmi J. Sharaibi
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Sorption Process ◽  
Ion Concentration ◽  
Isothermal Kinetics ◽  
Fish Scale ◽  
Biosorption Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Biomass Dosage

Biosorbent prepared from the scale of croaker fish (Genyonemus lineatus) has been used for the removal of Pb(II) ion from aqueous solution in a batch system. The effects of some important parameters such as pH, initial metal concentration, temperature and biosorbent dosage on biosorption capacity were investigated. Equilibrium time for the biosorption process is 20 and 30 min at lower and higher concentrations, respectively. The process at 28 °C is in agreement with a pseudo-second-order kinetics model. The equilibrium data obeyed the Langmuir adsorption isotherm with a maximum monolayer adsorption capacity of 14.58 mg g−1. The study showed that the sorption process depends on biomass dosage, temperature, pH and initial metal ion concentration. The calculated thermodynamics parameters (ΔGo, ΔHo and ΔSo) indicated that the biosorption of the metal ion onto fish scale is feasible, spontaneous and exothermic in nature.

scholarly journals Phragmites karkaas a Biosorbent for the Removal of Mercury Metal Ions from Aqueous Solution: Effect of Modification

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Muhammad Hamid Raza ◽  
Aqsa Sadiq ◽  
Umar Farooq ◽  
Makshoof Athar ◽  
Tajamal Hussain ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Metal Ion ◽  
Freundlich Isotherm ◽  
Agitation Speed ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Phragmites Karka

Batch scale studies for the adsorption potential of novel biosorbentPhragmites karka(Trin), in its natural and treated forms, were performed for removal of mercury ions from aqueous solution. The study was carried out at different parameters to obtain optimum conditions of pH, biosorbent dose, agitation speed, time of contact, temperature, and initial metal ion concentration. To analyze the suitability of the process and maximum amount of metal uptake, Dubinin-Radushkevich (D-R) model, Freundlich isotherm, and Langmuir isotherm were applied. The values ofqmaxfor natural and treated biosorbents were found at 1.79 and 2.27 mg/g, respectively. The optimum values of contact time and agitation speed were found at 50 min and 150 rpm for natural biosorbent whereas 40 min and 100 rpm for treated biosorbent, respectively. The optimum biosorption capacities were observed at pH 4 and temperature 313 K for both naturalP. karkaand treatedP. karka.RLvalues indicate that comparatively treatedP. karkawas more feasible for mercury adsorption compared to naturalP. karka. Both pseudo-first-order and pseudo-second-order kinetic models were applied and it was found that data fit best to the pseudo-second-order kinetic model. Thermodynamic studies indicate that adsorption process was spontaneous, feasible, and endothermic.

Sign in / Sign up

Export Citation Format

Share Document