scholarly journals Gas-Phase Growth of Heterostructures of Carbon Nanotubes and Bimetallic Nanowires

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Whi Dong Kim ◽  
Jung Min Park ◽  
Ji Young Ahn ◽  
Soo Hyung Kim
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Gas Phase ◽  
Average Length ◽  
Hydrogen Gas ◽  
Raman Spectrometry ◽  
Entire Surface ◽  
Thermal Cvd ◽  
Transmission Electron ◽  
Uniform Diameter

A simple, inexpensive, and viable method for growing multiple heterostructured carbon nanotubes (CNTs) over the entire surface of Ni-Al bimetallic nanowires (NWs) in the gas phase was developed. Polymer-templated bimetallic nitrate NWs were produced by electrospinning in the first step, and subsequent calcination resulted in the formation of bimetallic oxide NWs by thermal decomposition. In the second step, free-floating bimetallic NWs were produced by spray pyrolysis in an environment containing hydrogen gas as a reducing gas. These NWs were continuously introduced into a thermal CVD reactor in order to grow CNTs in the gas phase. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectrometry analyses revealed that the catalytic Ni sites exposed in the non-catalytic Al matrix over the entire surface of the bimetallic NWs were seeded to radially grow highly graphitized CNTs, which resembled “foxtail” structures. The grown CNTs were found to have a relatively uniform diameter of approximately10±2 nm and 10 to 15 walls with a hollow core. The average length of the gas-phase-grown CNTs can be controlled between 100 and 1000 nm by adjusting the residence time of the free-floating bimetallic NWs in the thermal CVD reactor.

Structure and Field Electron Emission of Carbon Nanotubes Dependent on Growth Temperature

2002 ◽  
Vol 728 ◽  
Author(s):  
Yoon Huh ◽  
Jeong Yong Lee ◽  
Tae Jae Lee ◽  
Seung Chul Lyu ◽  
Cheol Jin Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Growth Rate ◽  
Growth Temperature ◽  
Silicon Oxide ◽  
Structural Characteristics ◽  
Average Diameter ◽  
Crystalline Perfection ◽  
Thermal Cvd ◽  
Transmission Electron

AbstractThis present work deals with the temperature dependence on the growth and structure of CNTs grown by thermal CVD. The vertically aligned CNTs are synthesized on iron (Fe)-deposited silicon oxide (SiO2) substrate by thermal CVD using acetylene gas at temperatures in the range 750-950°C. Configuration and structural characteristics of CNTs have been investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). As the growth temperature increases from 750 to 950°C, the growth rate and the average diameter increase while the density decreases by a factor of about 2. TEM images show that the relative amount of crystalline graphitic sheets increases with increasing the growth temperature and a higher degree of crystalline perfection can be achieved at 950°C. The HRTEM images reveal consistently that the degree of crystalline perfection increases progressively as the growth temperature increases. This result demonstrates that the growth rate, diameter, density, and crystallinity of carbon nanotubes can be controlled with the growth temperature.

CHARACTERIZATION AND ELECTRICAL PROPERTIES OF ALIGNED CARBON NANOTUBES WITH HIGH ASPECT RATIO

2011 ◽  
Vol 10 (01n02) ◽  
pp. 23-28
Author(s):  
RAVI BHATIA ◽  
V. PRASAD ◽  
M. REGHU
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Aspect Ratio ◽  
Multiwall Carbon Nanotubes ◽  
High Quality ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Electron Microscopy Analysis ◽  
High Degree

High-quality multiwall carbon nanotubes (MWNTs) were produced by a simple one-step technique. The production of MWNTs was based on thermal decomposition of the mixture of a liquid phase organic compound and ferrocene. High degree of alignment was noticed by scanning electron microscopy. The aspect ratio of as-synthesized MWNTs was quite high (more than 4500). Transmission electron microscopy analysis showed the presence of the catalytic iron nanorods at various lengths of MWNTs. Raman spectroscopy was used to know the quality of MWNTs. The ratio of intensity of the G-peak to the D-peak was very high which revealed high quality of MWNTs. Magnetotransport studies were carried out at low temperature and a negative MR was noticed.

scholarly journals Biocompatibility Characteristics of Titanium Coated with Multi Walled Carbon Nanotubes—Hydroxyapatite Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 224 ◽  
Author(s):  
Jung-Eun Park ◽  
Yong-Seok Jang ◽  
Tae-Sung Bae ◽  
Min-Ho Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sol Gel ◽  
Pure Titanium ◽  
Cell Proliferation And Differentiation ◽  
Transmission Electron ◽  
Proliferation And Differentiation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi walled carbon nanotubes-hydroxyapatite (MWCNTs-HA) with various contents of MWCNTs was synthesized using the sol-gel method. MWCNTs-HA composites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). HA particles were generated on the surface of MWCNT. Produced MWCNTs-HA nanocomposites were coated on pure titanium (PT). Characteristic of the titanium coated MWCNTs-HA was evaluated by field-emission scanning electron microscopy (FE-SEM) and XRD. The results show that the titanium surface was covered with MWCNTs-HA nanoparticles and MWCNTs help form the crystalized hydroxyapatite. Furthermore, the MWCNTs-HA coated titanium was investigated for in vitro cellular responses. Cell proliferation and differentiation were improved on the surface of MWCNT-HA coated titanium.

Formation of Nanotubes of Carbon by Joule Heating of Carbon-Contaminated Si Nanochains

2011 ◽  
Vol 470 ◽  
pp. 171-174
Author(s):  
Hideo Kohno ◽  
Takafumi Nogami
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Transmission Electron Microscopy ◽  
Joule Heating ◽  
Carbon Shell ◽  
Surface Carbon ◽  
Si Nanowire ◽  
Transmission Electron

We report a new route to fabricating carbon nanotubes and nanotube interconnects. Insulating Si nanochains covered with hydrocarbon, which are a kind of Si nanowire, can be transformed into distorted nanotubes of carbon by Joule heating. Transmission electron microscopy observations of the transformation reveal that first a surface carbon shell is formed, and then oxide evaporates by Joule heating forming a nanotube.

Carbon Nanotubes Grown on Metallic Wires by Cold Plasma Technique

2002 ◽  
Vol 737 ◽  
Author(s):  
D. Sarangi ◽  
A. Karimi
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Growth Conditions ◽  
Effect Of Temperature ◽  
Rutherford Back Scattering ◽  
Novel Approach ◽  
Transmission Electron ◽  
Back Scattering ◽  
Metallic Wires ◽  
Metal Wires

ABSTRACTCarbon nanotubes on metallic wires may be act as electrode for the field emission (FE) luminescent devices. Growing nanotubes on metallic wires with controlled density, length and alignment are challenging issues for this kind of devices. We, in the present investigation grow carbon nanotubes directly on the metal wires by a powerful but simple technique. A novel approach has been proposed to align nanotubes during growth. Methane, acetylene and dimethylamine have been used as source gases. With the same growth conditions (viz. pressure, growth temperature and plasma) methane does not produce any nanotube but nanotubes grown with dimethylamine show shorter length and radius than acetylene. The effect of temperature to control the radius, time to control the density, plasma conditions to align the nanotubes has been focused. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) and Rutherford Back Scattering (RBS) are used to characterize the nanotubes.

Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application

2007 ◽  
Vol 561-565 ◽  
pp. 655-658 ◽  
Author(s):  
Qiang Zeng ◽  
Jennifer Luna ◽  
Y. Bayazitoglu ◽  
Kenneth Wilson ◽  
M. Ashraf Imam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Single Walled Carbon Nanotubes ◽  
Metal Composite ◽  
X Ray ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
Metal Composite Materials ◽  
Walled Carbon Nanotubes

This study is considered as a method for producing multifunctional metal composite materials by using Single-walled Carbon Nanotubes (SWNTs). In this research, various metals (Ni, Cu, Ag ) were successfully deposited onto the surface of SWNTs. It has been found that homogenous dispersion and dense nucleation sites are the necessary conditions to form uniform coating on SWNTs. Functionalization has been applied to achieve considerable improvement in the dispersion of purified single-walled carbon nanotubes. A three-step electroless plating approach was used and the coating mechanism is described in the paper. The samples were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The application of coated SWNTs in Titanium will be discussed in this paper.

scholarly journals Carbon Nanofibers from Carbon Nanotubes by 1.2 keVAr+Sputtering at Room Temperature

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Shuang-Xi Xue ◽  
Qin-Tao Li ◽  
Xian-Rui Zhao ◽  
Qin-Yi Shi ◽  
Zhi-Gang Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Carbon Nanofibers ◽  
Carbon Nanoparticles ◽  
Room Temperature ◽  
Ion Irradiation ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Carbon Nanowires

Multi-walled carbon nanotubes (MWCNTs) were irradiated by 1.2 keV Ar ion beams for 15–60 min at room temperature with current density of 60 µA/cm2. The morphology and microstructure are investigated by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The results show that carbon nanofibers are achieved after 60 min ion irradiation and the formation of carbon nanofibers proceeds through four periods, carbon nanotubes—amorphous carbon nanowires—carbon nanoparticles along the tube axis—conical protrusions on the nanoparticles surface—carbon nanofibers from the conical protrusions.

Sign in / Sign up

Export Citation Format

Share Document