scholarly journals Enhancement of Adhesion between EPDM and Polyester Fabric by Using Natural Rubber Modified by Maleic Anhydride

2011 ◽  
Vol 2011 ◽  
pp. 1-4 ◽  
Author(s):  
A. A. El-Wakil
Keyword(s):  
Maleic Anhydride ◽  
Natural Rubber ◽  
Adhesion Force ◽  
Peel Strength ◽  
Polyester Fabric ◽  
Ethylene Propylene Diene Monomer ◽  
Epdm Rubber ◽  
Ethylene Propylene ◽  
Coated Fabric ◽  
The Stability

This study presents a new method for improving adhesion between ethylene propylene diene monomer (EPDM) rubber and polyester fabric. In this work, natural rubber was modified by maleic anhydride in order to improve the adhesion force between ethylene propylene diene monomer rubber and polyester fabric. The effect of thermal aging and ionizing radiation on the stability of the rubber mix as well as on the peel strength of the rubber-coated fabric was investigated. It was observed that the natural rubber modified by maleic anhydride improved the peel strength of the EPDM rubber-coated polyester fabric.

Hydrogenated Natural Rubber as an Alternative Replacement to Ethylene-Propylene-Diene-Monomer (EPDM) Rubber in Terms of Thermal-Oxidative Degradation Properties

2019 ◽  
Vol 61 (5) ◽  
pp. 567-573
Author(s):  
Korn Taksapattanakul ◽  
Tulyapong Tulyapitak ◽  
Pranee Phinyocheep ◽  
Polphat Ruamcharoen ◽  
Jareerat Ruamcharoen ◽  
...  
Keyword(s):  
Natural Rubber ◽  
Oxidative Degradation ◽  
Thermal Oxidative Degradation ◽  
Ethylene Propylene Diene Monomer ◽  
Epdm Rubber ◽  
Ethylene Propylene ◽  
Degradation Properties

scholarly journals Durability and Electrical Conductivity of Carbon Fiber Cloth/Ethylene Propylene Diene Monomer Rubber Composite for Active Deicing and Snow Melting

Polymers ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2051
Author(s):  
Shuanye Han ◽  
Haibin Wei ◽  
Leilei Han ◽  
Qinglin Li
Keyword(s):  
Composite Material ◽  
Carbon Fiber ◽  
Ethylene Propylene Diene Monomer ◽  
Snow Melting ◽  
Epdm Rubber ◽  
Ethylene Propylene ◽  
Carbon Fiber Cloth ◽  
Rubber Composite ◽  
The Impact ◽  
Functional Components

To reduce the impact of road ice and snow disaster, it is necessary to adopt low energy consumption and efficient active deicing and snow melting methods. In this article, three functional components are combined into a conductive ethylene propylene diene monomer (EPDM) rubber composite material with good interface bonding. Among them, the mechanical and electrical properties of the composite material are enhanced by using carbon fiber cloth as a heating layer. EPDM rubber plays a mainly protective role. Further, aluminum silicate fiber cloth is used as a thermal insulation layer. The mechanical properties of EPDM rubber composites reinforced by carbon fiber cloth and the thermal behaviors of the composite material in high and low temperature environments were studied. The heat generation and heat transfer effect of the composite were analyzed by electrothermal tests. The results show that the conductive EPDM rubber composite material has good temperature durability, outstanding mechanical stability, and excellent heat production capacity. The feasibility of the material for road active deicing and snow melting is verified. It is a kind of electric heating deicing material with broad application prospects.

Polyamide Reinforced EPDM Compatibilized with Maleic Anhydride Grafted Ethylene-Propylene-Diene Rubber

2003 ◽  
Vol 11 (3) ◽  
pp. 179-188
Author(s):  
Xin Liu ◽  
Hua Huang ◽  
Yong Zhang ◽  
Yinxi Zhang
Keyword(s):  
Maleic Anhydride ◽  
Thermal Ageing ◽  
Scanning Calorimetry ◽  
Reactive Compatibilization ◽  
Ethylene Propylene ◽  
Ethylene Propylene Diene Rubber ◽  
The Stability ◽  
Diene Rubber ◽  
Crosslinking Agents ◽  
Scanning Electron

Vulcanizates of blends of ethylene-propylene-diene rubber (EPDM) and polyamide (PA) copolymer were prepared by reactive compatibilization. A reactive route was employed to compatibilize these blends by the addition of maleic anhydride EPDM (MAH-g-EPDM). In this paper, the influence of compatibilizers, crosslinking agents, and blend composition on the mechanical properties of the blends were investigated. The morphologies of the blends were determined by scanning electron microscopy. It was found that the addition of MAH-g-EPDM reduced the particle size of the dispersed phase remarkably. The stability of the blend was measured by thermal ageing at high temperature in the presence of compatibilizer. Both dynamic mechanical thermal analysis and differential scanning calorimetry experiments were carried out to investigate the effect of MAH-g-EPDM addition on the Tgs of the blend components. The addition of PA copolymer caused significant improvement in the tensile properties of these blends.

Sign in / Sign up

Export Citation Format

Share Document