scholarly journals Impact of Nanograting Phase-Shift on Light Absorption Enhancement in Plasmonics-Based Metal-Semiconductor-Metal Photodetectors

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Narottam Das ◽  
Ayman Karar ◽  
Chee Leong Tan ◽  
Kamal Alameh ◽  
Yong Tak Lee
Keyword(s):  
Phase Shift ◽  
Light Absorption ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Fdtd Method ◽  
Absorption Enhancement ◽  
Force Microscopy ◽  
Atomic Force ◽  
Metal Semiconductor Metal ◽  
Difference Time

The finite difference time-domain (FDTD) method is used to simulate the light absorption enhancement in a plasmonic metal-semiconductor-metal photodetector (MSM-PD) structure employing a metal nanograting with phase shifts. The metal fingers of the MSM-PDs are etched at appropriate depths to maximize light absorption through plasmonic effects into a subwavelength aperture. We also analyse the nano-grating phase shift and groove profiles obtained typically in our experiments using focused ion beam milling and atomic force microscopy and discuss the dependency of light absorption enhancement on the nano-gratings phase shift and groove profiles inscribed into MSM-PDs. Our simulation results show that the nano-grating phase shift blue-shifts the wavelength at which the light absorption enhancement is maximum, and that the combined effects of the nano-grating groove shape and phase shift degrade the light absorption enhancement by up to 50%.

Extending AFM Phase Image of Nanocomposite Structures to 3D using FIB

2012 ◽  
Vol 1421 ◽  
Author(s):  
Russell J. Bailey ◽  
Remco Geurts ◽  
Debbie J. Stokes ◽  
Frank de Jong ◽  
Asa H. Barber
Keyword(s):  
Phase Contrast ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Polymer Nanocomposite ◽  
Three Dimensions ◽  
Phase Image ◽  
Force Microscopy ◽  
Atomic Force ◽  
Mechanical Information ◽  
Nanocomposite Structures

ABSTRACTThe mechanical behavior of nanocomposites is critically dependent on their structural composition. In this paper we use Focused Ion Beam (FIB) microscopy to prepare surfaces from a layered polymer nanocomposite for investigation using phase contrast atomic force microscopy (AFM). Phase contrast AFM provides mechanical information on the surface examined and, by combining with the sequential cross-sectioning of FIB, can extend the phase contract AFM into three dimensions.

Fabrication of Ga-templates Using a Focused Ion Beam

2009 ◽  
Vol 1228 ◽  
Author(s):  
Hao Wang ◽  
Greg C. Hartman ◽  
Joshua Williams ◽  
Jennifer L. Gray
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Processing Conditions ◽  
New Materials ◽  
Force Microscopy ◽  
Atomic Force ◽  
Nitridation Process ◽  
Microscopy Characterization ◽  
Device Technology

AbstractThere are many factors that have the potential to limit significant advances in device technology. These include the ability to arrange materials at shrinking dimensions and the ability to successfully integrate new materials with better properties or new functionalities. To overcome these limitations, the development of advanced processing methods that can organize various combinations of materials at nano-scale dimensions with the necessary quality and reliability is required. We have explored using a gallium focused ion beam (FIB) as a method of integrating highly mismatched materials with silicon by creating template patterns directly on Si with nanoscale resolution. These templates are potentially useful as a means of locally controlling topography at nanoscale dimensions or as a means of locally implanting Ga at specific surface sites. We have annealed these templates in vacuum to study the effects of ion dosage on local Ga concentration and topography. We have also investigated the feasibility of creating Ga nanodots using this method that could eventually be converted to GaN through a nitridation process. Atomic force microscopy and electron microscopy characterization of the resulting structures are shown for a variety of patterning and processing conditions.

scholarly journals Butterfly-Inspired 2D Periodic Tapered-Staggered Subwavelength Gratings Designed Based on Finite Difference Time Domain Method

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Houxiao Wang ◽  
Wei Zhou ◽  
Er Ping Li ◽  
Rakesh Ganpat Mote
Keyword(s):  
Finite Difference ◽  
Time Domain ◽  
Finite Difference Time Domain ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Fdtd Method ◽  
Subwavelength Structures ◽  
Surface Reflection ◽  
Subwavelength Gratings ◽  
Difference Time

The butterfly-inspired 2D periodic tapered-staggered subwavelength gratings were developed mainly using finite difference time domain (FDTD) method, assisted by using focused ion beam (FIB) nanoscale machining or fabrication. The periodic subwavelength structures along the ridges of the designed gratings may change the electric field intensity distribution and weaken the surface reflection. The performance of the designed SiO2gratings is similar to that of the corresponding Si gratings (the predicted reflectance can be less than around 5% for the bandwidth ranging from 0.15 μm to 1 μm). Further, the antireflection performance of the designedx-unspaced gratings is better than that of the correspondingx-spaced gratings. Based on the FDTD designs and simulated results, the butterfly-inspired grating structure was fabricated on the silicon wafer using FIB milling, reporting the possibility to fabricate these FDTD-designed subwavelength grating structures.

Study of Electrochemical Deposition of Copper and Microstructure Evolution in Fine Lines

1999 ◽  
Vol 562 ◽  
Author(s):  
Stephan Grunow ◽  
Deda Diatezua ◽  
Soon-Cheon Seo ◽  
Timothy Stoner ◽  
Alain E. KaloyerosI
Keyword(s):  
Electrochemical Deposition ◽  
Microstructure Evolution ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Process Window ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Underlying Mechanisms ◽  
Pure Cu

ABSTRACTAs computer chip technologies evolve from aluminum-based metallization schemes to their copper-based counterparts, Electrochemical Deposition (ECD) is emerging as a viable deposition technique for copper (Cu) interconnects. This paper presents the results of a first-pass study to examine the underlying mechanisms that control ECD Cu nucleation, growth kinetics, and post-deposition microstructure evolution (self-annealing), leading to the development and optimization of an ECD Cu process recipe for sub-quarter-micron device generations. The influence of bath composition, current waveform, type and texture of Cu seed layer, and device feature size (scaling effect) on the evolution of film texture, morphology, electrical properties, and fill characteristics was investigated using a manufacturing-worthy ReynoldsTech 8″ wafer plating tool. Resulting films were analyzed by X-ray Diffraction (XRD), four-point resistivity probe, Focused-Ion-Beam Scanning Electron Microscopy (FIB-SEM), and Atomic Force Microscopy (AFM). These investigations identified an optimized process window for the complete fill of aggressive device structures with pure Cu with resistivity ∼ 2.0 μΩ-cm and smooth surface morphology.

scholarly journals Structure-Function Correlative Microscopy of Peritubular and Intertubular Dentine

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1493 ◽  
Author(s):  
Tan Sui ◽  
Jiří Dluhoš ◽  
Tao Li ◽  
Kaiyang Zeng ◽  
Adrian Cernescu ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Volume Fraction ◽  
Ion Beam ◽  
Near Field ◽  
Structural Difference ◽  
Correlative Microscopy ◽  
Mineral Concentration ◽  
Force Microscopy ◽  
Atomic Force ◽  
Backscattered Electron

Peritubular dentine (PTD) and intertubular dentine (ITD) were investigated by 3D correlative Focused Ion Beam (FIB)-Scanning Electron Microscopy (SEM)-Energy Dispersive Spectroscopy (EDS) tomography, tapping mode Atomic Force Microscopy (AFM) and scattering-type Scanning Near-Field Optical Microscopy (s-SNOM) mapping. The brighter appearance of PTD in 3D SEM-Backscattered-Electron (BSE) imaging mode and the corresponding higher grey value indicate a greater mineral concentration in PTD (~160) compared to ITD (~152). However, the 3D FIB-SEM-EDS reconstruction and high resolution, quantitative 2D map of the Ca/P ratio (~1.8) fail to distinguish between PTD and ITD. This has been further confirmed using nanoscale 2D AFM map, which clearly visualised biopolymers and hydroxyapatite (HAp) crystallites with larger mean crystallite size in ITD (32 ± 8 nm) than that in PTD (22 ± 3 nm). Correlative microscopy reveals that the principal difference between PTD and ITD arises primarily from the nanoscale packing density of the crystallites bonded together by thin biopolymer, with moderate contribution from the chemical composition difference. The structural difference results in the mechanical properties variation that is described by the parabolic stiffness-volume fraction correlation function introduced here. The obtained results benefit a microstructure-based mechano-chemical model to simulate the chemical etching process that can occur in human dental caries and some of its treatments.

High Contrast Imaging of Interphases in Ternary Polymer Blends Using Focused Ion Beam Preparation and Atomic Force Microscopy

2005 ◽  
Vol 38 (6) ◽  
pp. 2368-2375 ◽  
Author(s):  
Nick Virgilio ◽  
Basil D. Favis ◽  
Marie-France Pépin ◽  
Patrick Desjardins ◽  
Gilles L'Espérance
Keyword(s):  
Atomic Force Microscopy ◽  
Polymer Blends ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
High Contrast ◽  
Contrast Imaging ◽  
Force Microscopy ◽  
Atomic Force ◽  
High Contrast Imaging ◽  
Ternary Polymer
Sign in / Sign up

Export Citation Format

Share Document