scholarly journals Numerical Model on Sound-Solid Coupling in Human Ear and Study on Sound Pressure of Tympanic Membrane

2011 ◽  
Vol 2011 ◽  
pp. 1-13
Author(s):  
Yao Wen-juan ◽  
Ma Jian-wei ◽  
Hu Bao-lin
Keyword(s):  
Tympanic Membrane ◽  
Middle Ear ◽  
External Auditory Canal ◽  
Sound Pressure ◽  
Least Squares Method ◽  
Three Dimensional ◽  
Element Model ◽  
Response Analysis ◽  
Fe Model ◽  
Pressure Function

Establishment of three-dimensional finite-element model of the whole auditory system includes external ear, middle ear, and inner ear. The sound-solid-liquid coupling frequency response analysis of the model was carried out. The correctness of the FE model was verified by comparing the vibration modes of tympanic membrane and stapes footplate with the experimental data. According to calculation results of the model, we make use of the least squares method to fit out the distribution of sound pressure of external auditory canal and obtain the sound pressure function on the tympanic membrane which varies with frequency. Using the sound pressure function, the pressure distribution on the tympanic membrane can be directly derived from the sound pressure at the external auditory canal opening. The sound pressure function can make the boundary conditions of the middle ear structure more accurate in the mechanical research and improve the previous boundary treatment which only applied uniform pressure acting to the tympanic membrane.

Integrity Assessment of Offshore Subsea Wells: Evaluation of Wellhead Finite Element Model Against Monitoring Data Using Different Soil Models

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Massimiliano Russo ◽  
Arash Zakeri ◽  
Sergey Kuzmichev ◽  
Guttorm Grytøyr ◽  
Edward Clukey ◽  
...  
Keyword(s):  
Finite Element ◽  
Three Dimensional ◽  
Interaction Mechanism ◽  
Field Measurements ◽  
Element Model ◽  
American Petroleum Institute ◽  
Response Analysis ◽  
Fe Model ◽  
Integrity Assessment ◽  
Blowout Preventer

Understanding well conductor–soil interaction mechanism plays an important role in well integrity assessment. Evaluation of field data obtained from monitored offshore wells can provide valuable insights into the matter. This paper presents a comparison of the numerical results obtained from a full three-dimensional (3D) finite element (FE) analyses model of the blowout preventer (BOP), wellhead (WH), conductor, and surface casing versus the field measured data obtained during drilling operations. Sensitivity studies were also performed for several parameters that were considered important in the local well response analysis under observed sea state conditions. The conductor–soil analyses were simulated using the Winkler spring p–y curves obtained by two different approaches: American Petroleum Institute (API) RP2GEO and a recently developed model by Zakeri et al. The results of bending moments in conductor and surface casing have indicated good agreement between FE model results and the field measurements.

scholarly journals Late Presentation of Idiopathic Tympanic Membrane Ossification with External Auditory Canal Stenosis

2015 ◽  
Vol 7 (3) ◽  
pp. 141-143
Author(s):  
Hitesh Verma
Keyword(s):  
Tympanic Membrane ◽  
Middle Ear ◽  
External Auditory Canal ◽  
Special Form ◽  
Rare Case ◽  
Late Presentation ◽  
Canal Stenosis ◽  
Middle Ear Cleft

ABSTRACT The external auditory canal (EAC) is formed by lateral cartilaginous and medial bony part. The stenosis of EAC is narrowing of the width of the EAC, i.e. either caused by congenital or acquired causes. Myringosclerosis is a condition caused by calcification of tissues in the tympanic membrane and ossification is a special form of fibrosis due to the long-term, irreversible continued inflammation in the middle ear cleft. We are presenting rare case of idiopathic tympanic membrane ossification with generalized stenosis of EAC in 29-year-old patient. How to cite this article Verma H, Dass A, Singhal SK, Gupta N. Late Presentation of Idiopathic Tympanic Membrane Ossification with External Auditory Canal Stenosis. Int J Otorhinolaryngol Clin 2015;7(3):141-143.

scholarly journals Condensation method in practical modal analysis of hull vibration with application of 3D FE model

2019 ◽  
pp. 162-169
Author(s):  
Valeriy Sutyrin
Keyword(s):  
Modal Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Fe Model ◽  
Structural Elements ◽  
Natural Vibrations ◽  
Condensation Method ◽  
Dimensional Finite Element ◽  
Three Dimensional Finite Element ◽  
Analytical Approaches

This paper gives modal analysis results for mid-body of a refrigerator carrier ship by means of combined three-dimensional finite-element model with 1.5 million DOF. The study estimates the error of modal analysis for the ship structure if its boundary conditions are specified in advance, i.e. approximately, as well as analyses the gain in time offered by structuring the analytical model as per reduction (condensation) method. Analytical approaches thus transformed can be successfully applied in filtering lower frequencies and modes of natural vibrations for structural elements and joints of hull in the direct vicinity of exciting force application points.

A Biomechanical Model of Lumbar Spine

2000 ◽  
Author(s):  
Subramanya Uppala ◽  
Robert X. Gao ◽  
Scott Cowan ◽  
K. Francis Lee
Keyword(s):  
Finite Element ◽  
Lumbar Spine ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Biomechanical Model ◽  
Element Model ◽  
Fe Model ◽  
Flexion Extension ◽  
Cortical Shell ◽  
Three Dimensional Finite Element

Abstract The strength and stability of the lumbar spine are determined not only by the bone and muscles, but also by the visco-elastic structures and the interplay between the different components of the spine, such as ligaments, capsules, annulus fibrosis, and articular cartilage. In this paper we present a non-linear three-dimensional Finite Element model of the lumbar spine. Specifically, a three-dimensional FE model of the L4-5 one-motion segment/2 vertebrae was developed. The cortical shell and the cancellous bone of the vertebral body were modeled as 3D isoparametric eight-nodal elements. Finite element models of spinal injuries with fixation devices are also developed. The deformations across the different sections of the spine are observed under the application of axial compression, flexion/extension, and lateral bending. The developed FE models provided input to both the fixture design and experimental studies.

scholarly journals A robust 3D finite element model for concrete columns confined by FRCM system

2019 ◽  
Vol 281 ◽  
pp. 01006 ◽  
Author(s):  
Majid M.A. Kadhim ◽  
Mohammed J Altaee ◽  
Ali Hadi Adheem ◽  
Akram R. Jawdhari
Keyword(s):  
Finite Element ◽  
Cement Mortar ◽  
Three Dimensional ◽  
Concrete Columns ◽  
Element Model ◽  
Fe Model ◽  
3D Finite Element ◽  
Composite Failure ◽  
Global Buckling ◽  
Fibre Reinforced Polymer

Fibre reinforced cementitious matric (FRCM) is a recent application of fibre reinforced polymer (FRP) reinforcement, developed to overcome several limitations associated with the use of organic adhesive [e.g. epoxies] in FRPs. It consists of two dimensional FRP mesh saturated with a cement mortar, which is inorganic in nature and compatible with concrete and masonry substrates. In this study, a robust three-dimensional (3D) finite element (FE) model has been developed to study the behaviour of slender reinforced concrete columns confined by FRCM jackets, and loaded concentrically and eccentrically. The model accounts for material nonlinearities in column core and cement mortar, composite failure of FRP mesh, and global buckling. The model response was validated against several laboratory tests from literature, comparing the ultimate load, load-lateral deflection and failure mode. Maximum divergence between numerical and experimental results was 12%. Following the validation, the model will be used later in a comprehensive parametric analysis to gain a profound knowledge of the strengthening system, and examine the effects of several factors expected to influence the behaviour of confined member.

A finite element model to study the effect of porosity location on the elastic modulus of a cantilever beam

2019 ◽  
Vol 43 (4) ◽  
pp. 443-453
Author(s):  
Stephen M. Handrigan ◽  
Sam Nakhla
Keyword(s):  
Finite Element ◽  
Elastic Modulus ◽  
Focused Ion Beam ◽  
Mechanical Response ◽  
Ion Beam ◽  
Three Dimensional ◽  
Beam Theory ◽  
Element Model ◽  
Fe Model ◽  
Three Dimensional Finite Element

An investigation to determine the effect of porosity concentration and location on elastic modulus is performed. Due to advancements in testing methods, the manufacturing and testing of microbeams to obtain mechanical response is possible through the use of focused ion beam technology. Meanwhile, rigorous analysis is required to enable accurate extraction of the elastic modulus from test data. First, a one-dimensional investigation with beam theory, Euler–Bernoulli and Timoshenko, was performed to estimate the modulus based on load-deflection curve. Second, a three-dimensional finite element (FE) model in Abaqus was developed to identify the effect of porosity concentration. Furthermore, the current work provided an accurate procedure to enable accurate extraction of the elastic modulus from load-deflection data. The use of macromodels such as beam theory and three-dimensional FE model enabled enhanced understanding of the effect of porosity on modulus.

scholarly journals Evaluation of Round Window Stimulation Performance in Otosclerosis Using Finite Element Modeling

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Shanguo Yang ◽  
Dan Xu ◽  
Xiaole Liu
Keyword(s):  
Finite Element ◽  
Middle Ear ◽  
Bone Growth ◽  
Round Window ◽  
Element Model ◽  
Annular Ligament ◽  
Fe Model ◽  
Sound Stimulation ◽  
Partial Fixation ◽  
Human Ear

Round window (RW) stimulation is a new type of middle ear implant’s application for treating patients with middle ear disease, such as otosclerosis. However, clinical outcomes show a substantial degree of variability. One source of variability is the variation in the material properties of the ear components caused by the disease. To investigate the influence of the otosclerosis on the performance of the RW stimulation, a human ear finite element model including middle ear and cochlea was established based on a set of microcomputerized tomography section images of a human temporal bone. Three characteristic changes of the otosclerosis in the auditory system were simulated in the FE model: stapedial annular ligament stiffness enlargement, stapedial abnormal bone growth, and partial fixation of the malleus. The FE model was verified by comparing the model-predicted results with published experimental measurements. The equivalent sound pressure (ESP) of RW stimulation was calculated via comparing the differential intracochlear pressure produced by the RW stimulation and the normal eardrum sound stimulation. The results show that the increase of stapedial annular ligament and partial fixation of the malleus decreases RW stimulation’s ESP prominently at lower frequencies. In contrast, the stapedial abnormal bone growth deteriorates RW stimulation’s ESP severely at higher frequencies.

A STRUCTURAL ANALYSIS AND TOPOLOGY OPTIMIZATION ON CYLINDER BLOCK OF HEAVY DUTY DIESEL ENGIN

2010 ◽  
Vol 24 (15n16) ◽  
pp. 2676-2681 ◽  
Author(s):  
HYUN-SEUNG LEE ◽  
YOUNG-SHIN LEE ◽  
JAE-HOON KIM ◽  
JOON-TAK JUN ◽  
JAE-OK LEE ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Structural Analysis ◽  
Three Dimensional ◽  
Element Model ◽  
Cylinder Block ◽  
Fe Model ◽  
Heavy Duty ◽  
Compacted Graphite ◽  
Heavy Duty Diesel Engine ◽  
Heavy Duty Diesel

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three-dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis by using property of CGI. The compacted graphite iron (CGI) is a material currently under study for the engine demanded for high torque, durability, stiffness, and fatigue. The FE model of the heavy duty diesel engine section consisting of four half cylinders was selected. The heavy duty diesel engine section includes a cylinder block, a cylinder head, a gasket, a liner, a bearing cap, bearing and bolts. The loading conditions of engine are pre-fit load, assembly load, and gas load. A structural analysis on the result was performed in order to optimize on the cylinder block of the diesel engine.

scholarly journals A Three-Dimensional Finite-Element Model of a Human Dry Skull for Bone-Conduction Hearing

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Namkeun Kim ◽  
You Chang ◽  
Stefan Stenfelt
Keyword(s):  
Finite Element ◽  
Bone Conduction ◽  
Three Dimensional ◽  
Human Head ◽  
Element Model ◽  
Fe Model ◽  
Lateral Direction ◽  
Dimensional Finite Element ◽  
Simulation Results ◽  
Three Dimensional Finite Element

A three-dimensional finite-element (FE) model of a human dry skull was devised for simulation of human bone-conduction (BC) hearing. Although a dry skull is a simplification of the real complex human skull, such model is valuable for understanding basic BC hearing processes. For validation of the model, the mechanical point impedance of the skull as well as the acceleration of the ipsilateral and contralateral cochlear bone was computed and compared to experimental results. Simulation results showed reasonable consistency between the mechanical point impedance and the experimental measurements when Young’s modulus for skull and polyurethane was set to be 7.3 GPa and 1 MPa with 0.01 and 0.1 loss factors at 1 kHz, respectively. Moreover, the acceleration in the medial-lateral direction showed the best correspondence with the published experimental data, whereas the acceleration in the inferior-superior direction showed the largest discrepancy. However, the results were reasonable considering that different geometries were used for the 3D FE skull and the skull used in the published experimental study. The dry skull model is a first step for understanding BC hearing mechanism in a human head and simulation results can be used to predict vibration pattern of the bone surrounding the middle and inner ear during BC stimulation.

Sign in / Sign up

Export Citation Format

Share Document