scholarly journals Extractive Spectrophotometric Method for Determination of Pioglitazone Hydrochloride in Raw Material and Tablets Using Ion-Pair Formation

2010 ◽  
Vol 7 (3) ◽  
pp. 915-921 ◽  
Author(s):  
Massoud Amanlou ◽  
Mohadeseh Zarei-Ghobadi ◽  
Mohammad Kazem Rofouei ◽  
Shahrooz Saremi ◽  
Abbas Kebriaeezadeh
Keyword(s):  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Ion Pair ◽  
Raw Material ◽  
Bromocresol Green ◽  
Assay Procedure ◽  
Significant Difference ◽  
Significant Interference

A simple, rapid and extractive spectrophotometric method was developed for the determination of pioglitazone hydrochloride in pure and pharmaceutical formulations. This method is based on the formation of yellow ion-pair complex between the basic nitrogen of the drug and bromocresol green (BCG) in phthalate buffer of pH 2.4. The formed complexes were extracted with chloroform and measured at 419 nm. The analytical parameters and their effects on the proposed systems are investigated. Beer’s law was obeyed in the range 2.5-14 μg/mL with correlation coefficient ≥ 0.995. The proposed method has been applied successfully for the determination of drug in commercial tablets dosage forms. No significant interference was observed from the excipients commonly used as pharmaceutical aids with the assay procedure. The validity of the proposed method was established by parallel determination against HPLC method and there was no significant difference between these two methods.

scholarly journals Extractive Spectrophotometric Method for the Determination of Lamivudine and Zidovudine in Pharmaceutical Preparations Using Bromocresol Purple

2013 ◽  
Vol 2013 ◽  
pp. 1-5
Author(s):  
Serife Evrim Kepekci Tekkeli
Keyword(s):  
Quality Control ◽  
Spectrophotometric Method ◽  
Pharmaceutical Preparations ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Ion Pair ◽  
Bromocresol Purple ◽  
Reaction Conditions ◽  
Drug Substances

A new spectrophotometric method has been established for the quantitation of lamivudine (LVD) and zidovudine (ZVD) in pharmaceutical preparations. The method is based on the reaction between the investigated drug substances and bromocresol purple (BCP) producing ion-pair complexes in acidic buffers which are suitable for chloroform extraction. The maximum absorbance of these complexes was measured at 424 nm in chloroform. All variables were studied to optimize the reaction conditions. Linearity ranges were found to be 25–250 μg mL−1for LVD-BCP and 50–300 μg mL−1for ZVD-BCP. The developed method was successfully applied for the determination of these drugs in pharmaceutical preparations. Excipients in pharmaceutical formulations did not interfere in the analysis. The results were compared statistically with those obtained by the HPLC method reported in the literature. According to the results, the proposed method can be recommended for quality control and routine analysis.

scholarly journals Spectrophotometric determination of dothiepin hydrochloride in pharmaceuticals through ion-pair complexation reaction

2012 ◽  
Vol 18 (2) ◽  
pp. 339-347 ◽  
Author(s):  
Sameer Abdulrahman ◽  
Kanakapura Basavaiah
Keyword(s):  
Ion Pair ◽  
Pure Form ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Complexation Reaction ◽  
Conditional Stability ◽  
Conditional Stability Constant ◽  
Accuracy And Precision ◽  
Significant Difference

Two simple, sensitive and extraction-free spectrophotometric methods are described for the determination of dothiepin hydrochloride (DOTH) both in pure form and in pharmaceutical tablets. The methods are based on ion-pair complex formation between dothiepin base (DOT) and two acidic dyes, namely, bromophenol blue (BPB) or bromocresol green (BCG) with absorption maximum at 425 nm for BPB method or 430 nm for BCG method. Beer?s law is obeyed over the concentration ranges of 1.0-15.0 and 1.0-17.5 ?g mL-1 DOT for BPB and BCG methods, respectively. The molar absorptivity values and Sandell?s sensitivity values are reported for both methods. The limits of detection (LOD) and quantification (LOQ) were calculated to be 0.18 and 0.53 ?g mL-1 for BPB method, and 0.17 and 0.50 ?g mL-1 for BCG method, respectively. The stoichiometry of the complex in either case was found to be 1: 1 and the conditional stability constant (KF) of the complexes has also been calculated. The proposed methods were applied successfully to the determination of DOTH in pure form and in its tablet form with good accuracy and precision. Statistical comparison of the results was performed using Student's t-test and variance ratio F-test at 95% confidence level and there was no significant difference between the official and proposed methods with regard to accuracy and precision. Further, the validity of the proposed methods was confirmed by recovery studies via standard addition technique.

scholarly journals New Kinetic Spectrophotometric Method for Determination of Folic Acid in Pharmaceutical Formulations

2015 ◽  
Vol 50 ◽  
pp. 169-178
Author(s):  
Mouhammed Khateeb ◽  
Basheer Elias ◽  
Fatema Al Rahal
Keyword(s):  
Folic Acid ◽  
Spectrophotometric Method ◽  
Pharmaceutical Formulations ◽  
Fixed Time ◽  
Rate Data ◽  
Sulfuric Acid Medium ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results

A simple and sensitive kinetic spectrophotometric method has been developed for the determination of folic acid (FA) in bulk and pharmaceutical Formulations. The method is based on the oxidation of FA by Fe (III) in sulfuric acid medium. Fe (III) subsequently reduces to Fe (II) which is coupled with potassium ferricyanide to form Prussian blue. The reaction is followed spectrophotometrically by measuring the increase in absorbance at λmax 725 nm. The rate data and fixed time methods were adopted for constructing the calibration curves. The linearity range was found to be 1–20 μg mL-1 for each method. The correlation coefficient was 0.9978 and 0.9993, and LOD was found to be 0.91 and 0.09 μg mL-1 for rate data and fixed time methods, respectively. The proposed method has been successfully applied to the determination of FA in formulations with no interference from the excipients. Statical comparison of the results shows that there is no significant difference between the proposed and pharmacopoeial methods

scholarly journals Spectrophotometric Determination of Gemifloxacin Mesylate, Moxifloxacin Hydrochloride, and Enrofloxacin in Pharmaceutical Formulations Using Acid Dyes

2014 ◽  
Vol 2014 ◽  
pp. 1-16 ◽  
Author(s):  
Ayman A. Gouda ◽  
Alaa S. Amin ◽  
Ragaa El-Sheikh ◽  
Amira G. Yousef
Keyword(s):  
Pharmaceutical Formulations ◽  
Bromothymol Blue ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Bromocresol Purple ◽  
Acid Dyes ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Comparison Of The Results

Simple, rapid, and extractive spectrophotometric methods were developed for the determination of some fluoroquinolones antibiotics: gemifloxacin mesylate (GMF), moxifloxacin hydrochloride (MXF), and enrofloxacin (ENF) in pure forms and pharmaceutical formulations. These methods are based on the formation of ion-pair complexes between the basic drugs and acid dyes, namely, bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), bromothymol blue (BTB), and methyl orange (MO) in acidic buffer solutions. The formed complexes were extracted with chloroform and measured at 420, 408, 416, 415, and 422 nm for BCG, BCP, BPB, BTB, and MO, respectively, for GMF; at 410, 415, 416, and 420 nm for BCP, BTB, BPB, and MO, respectively, for MXF; and at 419 and 414 nm for BCG and BTB, respectively, in case of ENF. The analytical parameters and their effects are investigated. Beer’s law was obeyed in the ranges 1.0–30, 1.0–20, and 2.0–24 μg mL−1for GMF, MXF, and ENF, respectively. The proposed methods have been applied successfully for the analysis of the studied drugs in pure forms and pharmaceutical formulations. Statistical comparison of the results with the reference methods showed excellent agreement and indicated no significant difference in accuracy and precision.

scholarly journals Development of Analytical Profile of Lamotrigine and its API Formulation

2021 ◽  
pp. 111-114
Author(s):  
VISHAL CHAUDHARY ◽  
VASUNDHARA SAXENA
Keyword(s):  
Spectrophotometric Method ◽  
Quantitative Estimation ◽  
Pharmaceutical Formulations ◽  
Hplc Method ◽  
Active Pharmaceutical Ingredients ◽  
Pharmaceutical Ingredients ◽  
Rp Hplc ◽  
System Suitability ◽  
Bulk Drug

Objective: The objective of this review is to put a light on the development of lamotrigine and its active pharmaceutical ingredients formulation with proper demonstration. Method: In the present work, one of the most imperative spectrophotometric method which is RP-HPLC method has been developed for the quantitative estimation of lamotrigine in bulk and pharmaceutical formulations. UV spectrophotometric method which involves the determination of Lamotrigine in bulk and in bulk drug and pharmaceutical formulation has maximum absorption at 307.5nm in methanol. It obeys Beer’s and Lambert’s law in the concentration range of 5-45 µg/ml. A rapid and sensitive RP- HPLC Method with UV detection (270 nm) for routine analysis of Lamotrigine formulation was developed. Chromatography was performed with mobile phase containing a mixture of methanol and Phosphate buffer (65:35v/v) with flow rate 1.0 ml/min. In the range of 20-100 µg/ml, the linearity of lamotrigine shows a correlation co-efficient of 0.9998. The proposed method was validated by determining sensitivity and system suitability parameters.

scholarly journals Validated Extractive Spectrophotometric Method for Determination of Domperidone in Pharmaceutical Formulations

2015 ◽  
Vol 17 (1) ◽  
pp. 25-31
Author(s):  
Jasmin Shah ◽  
M Rasul Jan ◽  
Muhammad Tariq Shah
Keyword(s):  
Acidic Medium ◽  
Pharmaceutical Formulations ◽  
Pharmaceutical Journal ◽  
Bromothymol Blue ◽  
Hplc Method ◽  
Ion Pair ◽  
Bromophenol Blue ◽  
Spectrophotometric Methods ◽  
New Methods

Simple, precise and sensitive extractive spectrophotometric methods have been developed for the determination of domperidone in pharmaceutical formulations. The new methods involve the formation of colored extractable ion pair complexes of the drug with bromothymol blue (BTB) and bromophenol blue (BPB) in acidic medium. The effects of various parameters like pH, reagent concentration and shaking time were studied. The extracted complexes of domperidone showed maximum absorbance at 410 nm with BTB and at 415 nm with BPB dye. The stiochiometry of the reaction between domperidone, BTB and BPB was found to be 1: 4. Domperidone was found to obey Beer’s law in the concentration ranges of 0.6-35 ?g/ml, 1-30 ?g/ml with BTB and BPB, respectively. The method has been applied successfully for the determination of domperidone in commercial tablets and suspension samples. The results obtained by the proposed methods were validated statistically and compared with the official HPLC method. DOI: http://dx.doi.org/10.3329/bpj.v17i1.22310 Bangladesh Pharmaceutical Journal 17(1): 25-31, 2014

scholarly journals Spectrophotometric and theoretical studies on the determination of etilefrine hydrochloride in pharmaceutical formulations and biological samples

2017 ◽  
Vol 16 (10) ◽  
pp. 2487-2500
Author(s):  
Ahmed Mohamed El Defrawy ◽  
Amr Lotfy Saber
Keyword(s):  
Methyl Orange ◽  
Correlation Coefficient ◽  
Density Functional ◽  
Ion Pairs ◽  
Ion Association ◽  
Pharmaceutical Formulations ◽  
Ion Pair ◽  
Bromocresol Green ◽  
Geometrical Parameters

Purpose: To develop a simple and cost effective spectrophotometric method for the determination of etilefrine hydrochloride (ET) in pharmaceutical formulations and human plasma.Methods: The method is based on extraction of ET into chloroform as ion-pair  complexes with bromocresol green (BCG) and methyl orange (MO) in acidic medium. The interaction of ET with BCG and MO reagents were investigated using  B3LYP/6-31G(d) level of theory. The geometrical parameters of the interacting species and the ion pairs formed were characterized based on their frontier  molecular orbitals, atomic charges, electrostatic potential map, as well as NBO analysis.Results: The colored species exhibited absorption maxima at 410 and 479 nm for the two systems in universal buffer of pH range (3.0 - 3.5), with molar absorptivity of 2.4 × 104 and 1.7 × 104 Lmol-1cm-1, for BCG and MO methods, respectively. The methods demonstrated good linearity with correlation coefficient ranging from  0.9987 – 0.9991 in the concentration ranges 0.5 – 16 and 2.0 – 18 μgmL-1 for BCG and MO methods, respectively. The composition ratio of the ion-association complexes was 1:1 in all cases as established by Job’s method. Sandell,s  sensitivity, correlation coefficient, detection and quantification limits were also calculated. Molecular descriptors were obtained based on optimized structures of the molecules under investigation, by applying the B3LYP/6-31G(d) method, and used to interpret the mode of interaction between these molecules to form the investigated ion pairs.Conclusion: The proposed methods make use of simple reagents, which a basic  analytical laboratory can afford. No interference was observed from common  pharmaceutical excipients and additives. ETMO ion pair has a larger interaction energy (higher stability) than ET-BCG ion pair as inferred from their interaction energies.Keywords: Density functional theory, Etilefrine hydrochloride, Ion pair complex, Spectrophotometry, Bromocresol green, Methyl orange, Geometric analysis

scholarly journals A kinetic spectrophotometric method for the determination of lansoprazole in pharmaceutical formulations

2006 ◽  
Vol 71 (10) ◽  
pp. 1107-1120 ◽  
Author(s):  
Nafisur Rahman ◽  
Zehra Bano ◽  
Hejaz Azmi ◽  
Mohammad Kashif
Keyword(s):  
Spectrophotometric Method ◽  
Room Temperature ◽  
Pharmaceutical Formulations ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results ◽  
Calibration Equations ◽  
Method Show

Asimple kinetic spectrophotometric method has been developed for the determination of lansoprazole in pharmaceutical formulations. The method is based on the oxidation of the drug with alkaline potassium permanganate at room temperature. The reaction was followed spectrophotometrically by measuring the increase in the absorbance owing to the formation of MnO 42? at 610 nm (Method A) and the decrease in the absorbance at 530 nm due to the disapperance of MnO4? (Method B). Calibration procedures were adopted for the assay of the drug. The calibration curves were linear over the concentration ranges of 5-150 and 5-70?g ml-1, with the corresponding calibration Equations: rate = -3.915x10-6 + 5.271x10-5 c and ?A = 1.04x 10-3 + 1.78x10-3 c for methods A, and B, respectively. A statistical comparison of the results of the proposed procedures with those of the reference spectrophotometric method show excellent agreement and indicated no significant difference between the compared methods in terms of accuracy and precision. Interval hypothesis tests were also performed, which indicated that the true bias of all samples was less than ? 2 %. .

scholarly journals High-Performance Liquid Chromatographic and First Derivative of the Ratio Spectrophotometric Determination of Amlodipine and Valsartan in Their Binary Mixtures

2010 ◽  
Vol 93 (3) ◽  
pp. 882-890 ◽  
Author(s):  
Dilek Kul ◽  
Burcu Dogan-Topal ◽  
Tugba Kutucu ◽  
Bengi Uslu ◽  
Sibel A Ozkan
Keyword(s):  
Spectrophotometric Method ◽  
High Performance ◽  
High Performance Liquid Chromatographic ◽  
Hplc Method ◽  
Time Saving ◽  
Pharmaceutical Dosage Form ◽  
First Derivative ◽  
Significant Difference ◽  
Long Acting

Abstract Amlodipine besylate (AML) is a long-acting calcium channel blocker used as an antihypertensive agent. Valsartan (VAL) is also used to treat hypertension, either alone or in combination with other agents. Two-component mixtures of AML and VAL were analyzed by HPLC and the ratio spectra of the first derivative spectrophotometric technique. The spectrophotometric method depends on the first derivative of the ratio-spectra by measurements of the amplitudes at 234.0 nm for VAL and 351.0 nm for AML. Calibration graphs were established for 0.520 g/mL AML and 132 g/mL VAL using the ratio spectra of the first derivative spectrophotometric method. In the HPLC method, an ACE 5 C18 (4.6 150 mm, 5 m) RP column at 30C with the mobile phase methanolacetonitrileNaH2PO4H2O buffer, including 5 mL/L triethylamine and adjusted to pH 3.0 (42 + 18 + 40, v/v/v) at 2.0 mL/min flow rate was used to separate both compounds with detection at 254.0 nm. Linearity was obtained in the concentration range of 0.5500 g/mL for AML and 5.0900 g/mL for VAL. The proposed methods have been extensively validated. These methods allow a number of cost- and time-saving benefits. They were successfully applied to the determination of AML and VAL in synthetic mixtures and in a pharmaceutical dosage form. There was no significant difference between the performance of the proposed methods regarding the mean and SD values. The proposed methods are simple, rapid, and suitable for QC applications.

Sign in / Sign up

Export Citation Format

Share Document