scholarly journals The Effect of UV-Irradiation (under Short-Circuit Condition) on Dye-Sensitized Solar Cells Sensitized with a Ru-Complex Dye Functionalized with a (diphenylamino)Styryl-Thiophen Group

2009 ◽  
Vol 2009 ◽  
pp. 1-9 ◽  
Author(s):  
Kazuteru Nonomura ◽  
Yunhua Xu ◽  
Tannia Marinado ◽  
Daniel P. Hagberg ◽  
Rong Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Uv Irradiation ◽  
Ruthenium Complex ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Ru Complex ◽  
Redox Electrolyte ◽  
Sensitized Solar Cells ◽  
Short Circuit Condition

A new ruthenium complex, cis-di(thiocyanato)(2,2′-bipyridine-4,4′-dicarboxylic acid)(4,4′-bis(2-(5-(2-(4-diphenylaminophenyl)ethenyl)-thiophen-2-yl)ethenyl)-2,2′-bipyridine)ruthenium(II) (named E322) has been synthesized for use in dye-sensitized solar cells (DSCs). Higher extinction coefficient and a broader absorption compared to the standard Ru-dye, N719, were aimed. DSCs were fabricated with E322, and the efficiency was 0.12% initially. (4.06% for N719, as reference). The efficiency was enhanced to 1.83% by exposing the cell under simulated sunlight containing UV-irradiation at short-circuit condition. The reasons of this enhancement are (1) enhanceing electron injection from sensitizer toTiO2following a shift toward positive potentials of the conduction band ofTiO2by the adsorption of protons or cations from the sensitizer, or from the redox electrolyte and (2) improving the regeneration reaction of the oxidized dye by the redox electrolyte by the dissolution of aggregated dye from the surface ofTiO2following the treatment.

scholarly journals Eco-Friendly Dye-Sensitized Solar Cells Based on Water-Electrolytes and Chlorophyll

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2150
Author(s):  
Ji-Hye Kim ◽  
Sung-Yoon Park ◽  
Dong-Hyuk Lim ◽  
So-Young Lim ◽  
Jonghoon Choi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Plasma Treatment ◽  
Ruthenium Complex ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Dye Adsorption ◽  
Synthesis Process ◽  
Dye Sensitized ◽  
Water Based ◽  
Sensitized Solar Cells

Organic solvents used for electrolytes of dye-sensitized solar cells (DSSCs) are generally not only toxic and explosive but also prone to leakage due to volatility and low surface tension. The representative dyes of DSSCs are ruthenium-complex molecules, which are expensive and require a complicated synthesis process. In this paper, the eco-friendly DSSCs were presented based on water-based electrolytes and a commercially available organic dye. The effect of aging time after the device fabrication and the electrolyte composition on the photovoltaic performance of the eco-friendly DSSCs were investigated. Plasma treatment of TiO2 was adopted to improve the dye adsorption as well as the wettability of the water-based electrolytes on TiO2. It turned out that the plasma treatment was an effective way of improving the photovoltaic performance of the eco-friendly DSSCs by increasing the efficiency by 3.4 times. For more eco-friendly DSSCs, the organic-synthetic dye was replaced by chlorophyll extracted from spinach. With the plasma treatment, the efficiency of the eco-friendly DSSCs based on water-electrolytes and chlorophyll was comparable to those of the previously reported chlorophyll-based DSSCs with non-aqueous electrolytes.

Thiocyanate Free Ruthenium(II) Complexes for Dye Sensitized Solar Cells (DSSCs)

2018 ◽  
Vol 382 ◽  
pp. 369-373
Author(s):  
Usana Mahanitipong ◽  
Preeyapat Prompan ◽  
Rukkiat Jitchati
Keyword(s):  
Solar Cells ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Visible Region ◽  
Photocurrent Density ◽  
Open Circuit ◽  
Dye Sensitized ◽  
Ligand Charge Transfer ◽  
Sensitized Solar Cells ◽  
Open Circuit Photovoltage

The four thiocyanate free ruthenium(II) complexes; [Ru(N^N)2(C^N)]PF6were synthesized and characterized for dye sensitized solar cells (DSSCs). The results showed that the broad absorptions covered the visible region from metal to ligand charge transfer (MLCT) were obtained with the main peaks at 560, 490 and 400 nm. The materials were studied DSSC performance under standard AM 1.5. Compound PP1 showed the power conversion efficiency (PCE) at 3.10%, with a short-circuit photocurrent density (Jsc) of 7.99 mA cm-2, an open-circuit photovoltage (Voc) of 563 mV and a high fill factor (ff) of 0.690.

scholarly journals Improved Performance of Dye-Sensitized Solar Cells with TiO2 Nanoparticles/Zn-Doped TiO2 Hollow Fiber Photoanodes

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2922 ◽  
Author(s):  
Zainal Arifin ◽  
Suyitno Suyitno ◽  
Syamsul Hadi ◽  
Bayu Sutanto
Keyword(s):  
Solar Cells ◽  
Tio2 Nanoparticles ◽  
Double Layer ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Photocurrent Density ◽  
Light Transmittance ◽  
Doped Tio2 ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

In this study, dye-sensitized solar cells (DSSCs) were fabricated using double-layer photoanodes consisting of TiO2 nanoparticles (NPs) and Zn-doped TiO2 hollow fibers (HFs). The TiO2 HFs were prepared by co-axial electrospinning and used as the light-scattering layer in the DSSC. The thickness variations of the TiO2 NP and Zn-doped TiO2 HF photoanode layers affect the performance of the DSSC, especially the short-circuit photocurrent density. The thickness of the TiO2 NP layer significantly affected the absorbance of photons and N719 dye molecules in the double-layer photoanode, while that of the Zn-doped TiO2 HF layer affected the scattering of light, as indicated by the low light transmittance in the photoanode. Conventional DSSCs consist of single-layer photoanodes, and exhibit relatively low efficiency, i.e., 1.293% and 0.89% for TiO2 NP and Zn-doped TiO2 HF, respectively. However, herein, the highest efficiency of the DSSC (3.122%) was achieved with a 15 μm NP-5 μm HF photoanode, for which the short-circuit photocurrent density, open-circuit photovoltage, and fill factor were 15.81 mA/cm2, 0.566 V, and 34.91%, respectively.

scholarly journals Crystalline poly(triazine imide) based g-CN as an efficient electrocatalyst for counter electrodes of dye-sensitized solar cells using a triiodide/iodide redox electrolyte

2015 ◽  
Vol 3 (48) ◽  
pp. 24232-24236 ◽  
Author(s):  
Woo-ram Lee ◽  
Young-Si Jun ◽  
Jihee Park ◽  
Galen D. Stucky
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Pt Catalyst ◽  
Counter Electrodes ◽  
Dye Sensitized ◽  
Photovoltaic Efficiency ◽  
Redox Electrolyte ◽  
Sensitized Solar Cells

DSSCs using g-CN as an electrocatalyst exhibit photovoltaic efficiency comparable to that of conventional Pt catalyst.

Effects of Activated Carbon Counter Electrode on Bifacial Dye Sensitized Solar Cells (DSSCs)

2021 ◽  
Vol 1016 ◽  
pp. 863-868
Author(s):  
Tika Erna Putri ◽  
Yuan Hao ◽  
Fadzai Lesley Chawarambwa ◽  
Hyunwoong Seo ◽  
Min Kyu Son ◽  
...  
Keyword(s):  
Solar Cells ◽  
Activated Carbon ◽  
Counter Electrode ◽  
Low Cost ◽  
Short Circuit ◽  
Dye Sensitized Solar Cells ◽  
Short Circuit Current ◽  
Optical Losses ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

The losses of solar cells are consisted of electrical losses and optical losses. Optical losses chiefly reduce the short-circuit current. Here we apply bifacial cell approach to increase light absorption and the short-circuit current of dye sensitized solar cells (DSSCs). We have employed activated carbon (AC) as a very low cost counter electrode, an alternative to Pt counter electrode. Addition of dimethyl sulfoxide (DMSO) and titanium carbonitride (TiCN) to AC increase the efficiency of bifacial DSSC at a mirror angle of from 5.10% to and , respectively. These results indicate that AC has the potential to replace Pt as a very low cost counter electrode of bifacial DSSCs. The bifacial DSSC system using double plane mirrors improve PCE to for Pt counter electrode at a mirror angle of , and for AC counter electrode at a mirror angle of , respectively.

Sign in / Sign up

Export Citation Format

Share Document