scholarly journals Interaction of Imidazole Containing Hydroxamic Acids with Fe(III): Hydroxamate Versus Imidazole Coordination of the Ligands

2007 ◽  
Vol 2007 ◽  
pp. 1-8 ◽  
Author(s):  
Etelka Farkas ◽  
Dávid Bátka ◽  
Hajnalka Csóka ◽  
Nóra V. Nagy
Keyword(s):  
Metal Ion ◽  
Hydroxamic Acids ◽  
Acetohydroxamic Acid ◽  
Equilibrium Studies ◽  
Solution Equilibrium ◽  
Mononuclear Complexes ◽  
Bonding Interaction ◽  
Uv Visible ◽  
Nmr Methods ◽  
Protonated Molecules

Solution equilibrium studies on Fe(III) complexes formed with imidazole-4-carbohydroxamic acid (Im-4-Cha), N-Me-imidazole-4-carbohydroxamic acid (N-Me-Im-4-Cha), imidazole-4-acetohydroxamic acid (Im-4-Aha), and histidinehydroxamic acid (Hisha) have been performed by using pH-potentiometry, UV-visible spectrophotometry, EPR, ESI-MS, andH-NMR methods. All of the obtained results demonstrate that the imidazole moiety is able to play an important role very often in the interaction with Fe(III), even if this metal ion prefers the hydroxamate chelates very much. If the imidazole moiety is inα-position to the hydroxamic one (Im-4-Cha and N-Me-Im-4-Cha) its coordination to the metal ion is indicated unambiguously by our results. Interestingly, parallel formation of (Nimidazole,Ohydroxamate), and (Ohydroxamate,Ohydroxamate) type chelates seems probable with N-Me-Im-4-Cha. The imidazole is inβ-position to the hydroxamic moiety in Im-4-Aha and an intermolecular noncovalent (mainly H-bonding) interaction seems to organize the intermediate-protonated molecules in this system. Following the formation of mono- and bishydroxamato mononuclear complexes, only EPR silent species exists in the Fe(III)-Hisha system above pH 4, what suggests the rather significant “assembler activity” of the imidazole (perhaps together with the ammonium moiety).

Factors determining the metal ion binding ability and selectivity of hydroxamate based compounds

2021 ◽  
Vol 28 ◽  
Author(s):  
Etelka Farkas ◽  
Linda Bíró ◽  
Péter Buglyó
Keyword(s):  
Metal Binding ◽  
Metal Ion ◽  
Hydroxamic Acids ◽  
Binding Modes ◽  
Metal Ion Binding ◽  
Equilibrium System ◽  
Solution Equilibrium ◽  
Drug Candidates ◽  
Equilibrium Data ◽  
Measurable Concentration

: There has been a long tradition for a broad spectrum of applications of both natural and synthetic hydroxamic acids and derivatives. Even nowadays, a huge number of newly designed representatives (from different monohydroxamate-based compounds to siderophore conjugates) are intended to develop potential drug candidates with desired activities. Since these compounds are effective metal-chelating agents their biological roles and actions as well as their various applications e.g. in the medicinal practice are all in direct correlation with their metal complexation. Consequently, the knowledge of the stoichiometry and binding modes of metal complexes with hydroxamic acid based ligands, their thermodynamic parameters, speciation profiles in solution is crucial for scientists working at any of the above-mentioned fields. This review, in addition to presenting a few factors, which might affect the metal binding capabilities of these organic ligands, displays and summarizes the different parameters typically used to give the stoichiometry/composition and stability of the species formed in a solution equilibrium system in measurable concentration. Discussion of the possibilities for quantitative comparison of metal binding effectivity and selectivity of various hydroxamic acids with each other by using solution equilibrium data is also in the focus of this publication.

Structure of the complexes of ethylenediphosphinetetraacetic acid in solution

1985 ◽  
Vol 50 (2) ◽  
pp. 445-453 ◽  
Author(s):  
Jana Podlahová ◽  
Josef Šilha ◽  
Jaroslav Podlaha
Keyword(s):  
Metal Ion ◽  
Carboxyl Groups ◽  
Complex Solution ◽  
Square Planar ◽  
Weak Complexes ◽  
Carboxylic Groups ◽  
Uv Visible ◽  
The Stability ◽  
Tetrahedral Complexes ◽  
Free Carboxyl

Ethylenediphosphinetetraacetic acid is bonded to metal ions in aqueous solutions in four ways, depending on the type of metal ion: 1) through an ionic bond of the carboxylic groups to form weak complexes with a metal:ligand ratio of 1 : 1 (Ca(II), Mn(II), Zn(II), Pb(II), La(III)); 2) through type 1) bond with contributions from weak interaction with the phosphorus (Cd(II)); 3) through coordination of the ligand as a monodentate P-donor with the free carboxyl groups with formation of 2 : 1 and 1 : 1 complexes (Cu(I), Ag(I)); 4) through formation of square planar or, for Hg(II), tetrahedral complexes with a ratio of 1 : 2 with the ligand as a bidentate PP-donor with the free carboxyl groups (Fe(II), Co(II), Ni(II), Pd(II), Pt(II)). On acidification of the complex solution, the first two protons are bonded to the carboxyl groups. The behaviour during further protonation depends on the type of complex: in complexes of types 1) and 2) phosphorus is protonated and the complex dissociates; in complexes of types 3) and 4) the free carboxyl groups are protonated and the phosphorus-metal bond remains intact. The results are based on correlation of the stability constants, UV-visible, infrared, 1H and 31P NMR spectra and magnetic susceptibilities of the complexes in aqueous solution.

scholarly journals New Brightener for Zn-Fe Alloy Plating from Sulphate Bath

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
B. M. Praveen ◽  
T. V. Venkatesha
Keyword(s):  
Grain Size ◽  
Metal Ion ◽  
Condensation Product ◽  
Spectroscopic Studies ◽  
Sem Images ◽  
Alloy Electrodeposition ◽  
Fine Grained ◽  
Polarization Studies ◽  
Uv Visible ◽  
Sulphate Bath

Zn-Fe alloy electrodeposition was carried out in the presence of condensation product 2-{[(1E)-(3,4-dimethoxyphenyl)methylidene]amino}-3-hydroxypropanoic acid formed between veratraldehyde and serine in acid sulphate bath. Hull cell was used for optimizing the operating parameters and bath constituents. During deposition, the potential was shifted towards cathodic direction in the presence of addition agents and brightener. The polarization studies show that deposition taking place in basic bath and optimum bath was 1.08 and 1.15 V, respectively. Current efficiency and throwing power were reached around 85% and 26%, respectively. The SEM images of bright deposit indicated its fine-grained nature and appreciable reduction in the grain size. XRD studies have showed that the grain size of the deposit generated from optimum bath was 16 nm. UV-visible spectroscopic studies confirm the formation of complex between metal ion and brightener.

Heavy and toxic metal ion removal by a novel polymeric ion-exchanger: synthesis, characterization, kinetics and equilibrium studies

2014 ◽  
Vol 90 (12) ◽  
pp. 2170-2179 ◽  
Author(s):  
Raja S. Azarudeen ◽  
Mohamed A. Riswan Ahamed ◽  
R. Subha ◽  
Abdul R. Burkanudeen
Keyword(s):  
Metal Ion ◽  
Toxic Metal ◽  
Ion Exchanger ◽  
Equilibrium Studies ◽  
Metal Ion Removal ◽  
Ion Removal

Photodegradation of New Methylene Blue N in Aqueous Solution Using Zinc Oxide and Titanium Dioxide as Catalyst

2012 ◽  
Author(s):  
Rusmidah Ali ◽  
Boon Siew Ooi
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Zinc Oxide ◽  
Titanium Dioxide ◽  
Optimum Condition ◽  
Metal Ion ◽  
Optimum Ratio ◽  
Photodegradation Rate ◽  
Uv Visible ◽  
Uv Lamp

Dalam kajian ini, ZnO dan TiO2 digunakan sebagai fotomangkin dalam pendegradasian pewarna New Methylene Blue N (NMBN). Kadar fotodegradasi diukur menggunakan alat spektrofotometer UV-Vis. Dalam kajian ini, New Methylene Blue N menunjukkan nilai serapan pada λ = 590 nm dan λ = 286 nm. Lampu UV (λ = 354 nm) digunakan dalam proses fotodegradasi. Dalam proses degradasi menggunakan ZnO menunjukkan 81.42% NMBN terdegradasi pada λ = 590 nm dan 77.75% pada λ = 286 nm. Sebaliknya, degradasi menggunakan TiO2 adalah 25.68% pada λ = 590 nm dan 26.37% pada λ = 286 nm. Peratus degradasi New Methylene Blue N ialah 88.89% dan 68.94% pada masing-masing λ = 590 nm dan λ = 286 nm apabila ditambahkan dengan H2O2. Campuran ZnO dan TiO2 dalam nisbah 85: 15 (0.085 g; 0.015 g) merupakan campuran fotomangkin yang paling optimum iaitu dengan peratus degradasi NMBN sebanyak 96.97% dan 93.61% pada λ = 590 nm dan λ = 286 nm. Penambahan ion logam Cu2+ memberikan peratus degradasi tertinggi berbanding ion logam lain iaitu 83.83% pada λ = 590 nm. Penambahan ion logam Pb2+ memberikan peratus degradasi tertinggi pada λ = 286 nm iaitu 81.25% pewarna terdegradasi. Keadaan optimum dicapai pada pH 5.90, dengan peratus degradasi tertinggi iaitu 92.84% dan 89.30% pada masing-masing λ = 590 nm dan λ = 286 nm. Kata kunci: New Methylene Blue N; fotodegradasi; larutan; ZnO; TiO2 In this study, ZnO and TiO2 are used as photocatalyst to degrade the dye, New Methylene Blue N (NMBN). The photodegradation rate was measured using UV-Visible spectrophotometer. In this study, New Methylene Blue N showed absorption values at λ = 590 nm and λ = 286 nm. UV lamp (λ = 354 nm) is used in the photodegradation process. Results showed that ZnO is a better photocatalyst compared to TiO2. The degradation by ZnO showed that 81% of NMBN was degraded at λ = 590 nm and 77.75% at λ = 286 nm. In contratst, the degradation using TiO2 was 25.68% at λ = 590 nm and 26.37% at λ = 286 nm. The percent degradation of New Methylene Blue N is 88.89% and 68.94% at λ = 590 nm and λ = 286 nm respectively when H2O2 was added. A mixture of ZnO and TiO2 in the ratio of 85: 15 (0.085 g: 0.015 g) is the most optimum ratio for the mixed photocatalyst where the degradation percentage of NMBN are 96.97% and 93.61% at λ = 590 nm and λ = 286 nm. The addition of Cu2+ metal ion gave the highest percentage of degradation (83.83% at λ = 590 nm) compared to other metal ions. The addition of Pb2+ gave the highest percentage of degradation at λ = 286 nm with 81.25% degradation of the dye. The optimum condition was achieved at pH 5.90, which gave the highest percentage degradation, 92.84% and 89.30% at λ = 590 nm and λ = 286 nm respectively. Key words: New Methylene Blue N; photodegradation; aqueous; ZnO; TiO2

scholarly journals Synthesis, Characterization and Antimicrobial Studies of N1-[(1E)-1-(2-Hydroxyphenyl) ethylidene]-2-oxo-2H-chromene-3-carbohydrazide and its Metal Complexes

2009 ◽  
Vol 6 (3) ◽  
pp. 615-624 ◽  
Author(s):  
K. Siddappa ◽  
K. Mallikarjun ◽  
Tukaram Reddy ◽  
M. Mallikarjun ◽  
C. V. Reddy ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Magnetic Susceptibility ◽  
Schiff Base ◽  
Metal Complexes ◽  
Molar Conductance ◽  
Tetrahedral Geometry ◽  
H Nmr ◽  
Antimicrobial Studies ◽  
Mononuclear Complexes ◽  
Uv Visible

A new complexes of the type ML, MʹL and M″L [where M=Cu(II), Co(II), Ni(II) and Mn(II), Mʹ=Fe(III) and M″=Zn(II), Cd(II) and Hg(II) and L=N1-[(1E)-1-(2-hydroxyphenyl)ethylidene]-2-oxo-2H-chromene- 3-carbohydrazide (HL)] Schiff base have been synthesized and characterized by elemental analysis, magnetic susceptibility, molar conductance, IR,1H NMR, UV-Visible and ESR data. The studies indicate the HL acts as doubly monodentate bridge for metal ions and form mononuclear complexes. The complexes Ni(II), Co(II), Cu(II) Mn(II) and Fe(III) complexes are found to be octahedral, where as Zn(II), Cd(II) and Hg(II) complexes are four coordinated with tetrahedral geometry. The synthesized ligand and its metal complexes were screened for their antimicrobial activity.

scholarly journals Trends and Exceptions in the Interaction of Hydroxamic Acid Derivatives of Common Di- and Tripeptides with Some 3d and 4d Metal Ions in Aqueous Solution

Molecules ◽  
2019 ◽  
Vol 24 (21) ◽  
pp. 3941 ◽  
Author(s):  
Ozsváth ◽  
Bíró ◽  
Nagy ◽  
Buglyó ◽  
Sanna ◽  
...  
Keyword(s):  
Metal Ions ◽  
Hydroxamic Acid ◽  
Hydroxamic Acids ◽  
17O Nmr ◽  
Equilibrium Study ◽  
Sandwich Type ◽  
Uv Visible ◽  
First Time ◽  
Derivatives Of ◽  
Half Sandwich

By using various techniques (pH-potentiometry, UV-Visible spectrophotometry, 1H and 17O-NMR, EPR, ESI-MS), first time in the literature, solution equilibrium study has been performed on complexes of dipeptide and tripeptide hydroxamic acids—AlaAlaNHOH, AlaAlaN(Me)OH, AlaGlyGlyNHOH, and AlaGlyGlyN(Me)OH—with 4d metals: the essential Mo(VI) and two half-sandwich type cations, [(η6-p-cym)Ru(H2O)3]2+ as well as [(η5-Cp*)Rh(H2O)3]2+, the latter two having potential importance in cancer therapy. The tripeptide derivatives have also been studied with some biologically important 3d metals, such as Fe(III), Ni(II), Cu(II), and Zn(II), in order to compare these new results with the corresponding previously obtained ones on dipeptide hydroxamic acids. Based on the outcomes, the effects of the type of metal ions, the coordination number, the number and types of donor atoms, and their relative positions to each other on the complexation have been evaluated in the present work. We hope that these collected results might be used when a new peptide-based hydroxamic acid molecule is planned with some purpose, e.g. to develop a potential metalloenzyme inhibitor.

scholarly journals Determination of Traces of Pd(II) in Spiked Samples by Using 3,4-Dihydroxybenzaldehydeisonicotinol-hydrazone as a Chelating Agent with UV Visible Spectrophotometer

2011 ◽  
Vol 8 (1) ◽  
pp. 217-225 ◽  
Author(s):  
S. Lakshmi Narayana ◽  
C. Ramachandraiah ◽  
A. Varada Reddy ◽  
Dongyeun Lee ◽  
Jaesool Shim
Keyword(s):  
Metal Ion ◽  
Regression Coefficient ◽  
Chelating Agent ◽  
Molar Absorptivity ◽  
Inexpensive Method ◽  
Colored Complex ◽  
Major Cations ◽  
Uv Visible ◽  
Metal Ligand

A simple, rapid, sensitive and inexpensive method has been developed for the determination of trace amounts of palladium(II) using 3,4-dihydroxybenzaldehydeisonicotinoylhydrazone (3,4-DHBINH). The metal ion gives a yellow colored complex with 3,4-DHBINH in acetate buffer of pH 3.0 with 1:1 (metal: ligand) composition. The complex shows maximum absorption at 380 nm. Beer’s law is obeyed in the range 0.5-20.0 ppm of Pd(II). The molar absorptivity, Sandell’s sensitivity and detection limit were found to be 0.53×104L mol-1cm-1, 0.02 μg cm-2and 0.0948 μg mL-1, respectively. The correlation coefficient and regression coefficient of the Pd(II)-3,4-DHBINH complex were 1.08 and 0.04 respectively. Major cations and anions did not show any interference. Anti-microbial activity of the Pd(II)-3,4-DHBINH has been studied. The developed method has been successfully applied to the analysis of Pd(II) in spiked samples. Comparing the results with those obtained using an atomic absorption spectrophotometer tested the validity of the method

Sign in / Sign up

Export Citation Format

Share Document