scholarly journals Laser-Generated Shocks and Bubbles as Laboratory-Scale Models of Underwater Explosions

2003 ◽  
Vol 10 (3) ◽  
pp. 147-157 ◽  
Author(s):  
Theodore G. Jones ◽  
Jacob Grun ◽  
L. Dale Bibee ◽  
Charles Manka ◽  
Alexandra Landsberg ◽  
...  
Keyword(s):  
Experimental Approach ◽  
Laser System ◽  
High Energy ◽  
Quality Data ◽  
Experimental Conditions ◽  
Hydrodynamic Simulation ◽  
Underwater Explosions ◽  
Scale Models ◽  
Experimental Parameters ◽  
Good Agreement

Underwater shocks and bubbles were generated using a high energy pulsed laser system. The advantages of this experimental approach are: (1) precisely controlled and measured experimental conditions; (2) improved diagnostics, including extensive imaging capabilities; (3) unique experiments, including a simultaneously detonated line charge; and (4) the ability to provide validation quality data for hydrodynamic simulation codes. Bubble sensitivity to variation of several experimental parameters was examined. Numerical simulations were performed corresponding to the experimental shots, showing that empirical bubble theory, experimental bubble data, and simulations were all in good agreement.

scholarly journals Low-Energy Electron Damage to Condensed-Phase DNA and Its Constituents

2021 ◽  
Vol 22 (15) ◽  
pp. 7879
Author(s):  
Yingxia Gao ◽  
Yi Zheng ◽  
Léon Sanche
Keyword(s):  
Condensed Phase ◽  
Genetic Material ◽  
High Energy ◽  
Dna Lesions ◽  
Low Energy ◽  
Experimental Investigations ◽  
Experimental Conditions ◽  
Strand Breaks ◽  
Sequence Of Events ◽  
Wide Range

The complex physical and chemical reactions between the large number of low-energy (0–30 eV) electrons (LEEs) released by high energy radiation interacting with genetic material can lead to the formation of various DNA lesions such as crosslinks, single strand breaks, base modifications, and cleavage, as well as double strand breaks and other cluster damages. When crosslinks and cluster damages cannot be repaired by the cell, they can cause genetic loss of information, mutations, apoptosis, and promote genomic instability. Through the efforts of many research groups in the past two decades, the study of the interaction between LEEs and DNA under different experimental conditions has unveiled some of the main mechanisms responsible for these damages. In the present review, we focus on experimental investigations in the condensed phase that range from fundamental DNA constituents to oligonucleotides, synthetic duplex DNA, and bacterial (i.e., plasmid) DNA. These targets were irradiated either with LEEs from a monoenergetic-electron or photoelectron source, as sub-monolayer, monolayer, or multilayer films and within clusters or water solutions. Each type of experiment is briefly described, and the observed DNA damages are reported, along with the proposed mechanisms. Defining the role of LEEs within the sequence of events leading to radiobiological lesions contributes to our understanding of the action of radiation on living organisms, over a wide range of initial radiation energies. Applications of the interaction of LEEs with DNA to radiotherapy are briefly summarized.

scholarly journals Signatures of the Carrier Envelope Phase in Nonlinear Thomson Scattering

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 528
Author(s):  
Marcel Ruijter ◽  
Vittoria Petrillo ◽  
Thomas C. Teter ◽  
Maksim Valialshchikov ◽  
Sergey Rykovanov
Keyword(s):  
Laser Pulse ◽  
Radiation Spectrum ◽  
Thomson Scattering ◽  
High Energy ◽  
Phase Changes ◽  
High Energy Radiation ◽  
Carrier Envelope Phase ◽  
High Intensity Laser ◽  
Experimental Parameters ◽  
Intensity Laser

High-energy radiation can be generated by colliding a relativistic electron bunch with a high-intensity laser pulse—a process known as Thomson scattering. In the nonlinear regime the emitted radiation contains harmonics. For a laser pulse whose length is comparable to its wavelength, the carrier envelope phase changes the behavior of the motion of the electron and therefore the radiation spectrum. Here we show theoretically and numerically the dependency of the spectrum on the intensity of the laser and the carrier envelope phase. Additionally, we also discuss what experimental parameters are required to measure the effects for a beamed pulse.

scholarly journals A flexible ChIP-sequencing simulation toolkit

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
An Zheng ◽  
Michael Lamkin ◽  
Yutong Qiu ◽  
Kevin Ren ◽  
Alon Goren ◽  
...  
Keyword(s):  
Ground Truth ◽  
Peak Calling ◽  
Simulation Framework ◽  
Experimental Conditions ◽  
Ground Truth Data ◽  
Chip Sequencing ◽  
Genome Wide ◽  
Experimental Parameters ◽  
Differential Binding ◽  
The Impact

Abstract Background A major challenge in evaluating quantitative ChIP-seq analyses, such as peak calling and differential binding, is a lack of reliable ground truth data. Accurate simulation of ChIP-seq data can mitigate this challenge, but existing frameworks are either too cumbersome to apply genome-wide or unable to model a number of important experimental conditions in ChIP-seq. Results We present ChIPs, a toolkit for rapidly simulating ChIP-seq data using statistical models of key experimental steps. We demonstrate how ChIPs can be used for a range of applications, including benchmarking analysis tools and evaluating the impact of various experimental parameters. ChIPs is implemented as a standalone command-line program written in C++ and is available from https://github.com/gymreklab/chips. Conclusions ChIPs is an efficient ChIP-seq simulation framework that generates realistic datasets over a flexible range of experimental conditions. It can serve as an important component in various ChIP-seq analyses where ground truth data are needed.

Preliminary results on the development of a nanosecond high-energy oscillator: regenerative-amplifier excimer laser system

1998 ◽  
Author(s):  
Olivier P. Uteza ◽  
Philippe C. Delaporte ◽  
Bernard L. Fontaine ◽  
Marc L. Sentis ◽  
Stephane Branly ◽  
...  
Keyword(s):  
Excimer Laser ◽  
Laser System ◽  
High Energy ◽  
Regenerative Amplifier ◽  
Preliminary Results

scholarly journals Practical quantum teleportation of an unknown quantum state

2017 ◽  
Vol 95 (5) ◽  
pp. 498-503
Author(s):  
Syed Tahir Amin ◽  
Aeysha Khalique
Keyword(s):  
Quantum State ◽  
Quantum Teleportation ◽  
Bell State ◽  
Linear Optics ◽  
State Measurement ◽  
Dark Counts ◽  
Experimental Parameters ◽  
Unknown Quantum State ◽  
Down Conversion ◽  
Good Agreement

We present our model to teleport an unknown quantum state using entanglement between two distant parties. Our model takes into account experimental limitations due to contribution of multi-photon pair production of parametric down conversion source, inefficiency, dark counts of detectors, and channel losses. We use a linear optics setup for quantum teleportation of an unknown quantum state by the sender performing a Bell state measurement. Our theory successfully provides a model for experimentalists to optimize the fidelity by adjusting the experimental parameters. We apply our model to a recent experiment on quantum teleportation and the results obtained by our model are in good agreement with the experimental results.

Adhesion Force Between High Energy Surfaces in Vapor Atmosphere

1994 ◽  
Vol 366 ◽  
Author(s):  
Jerome Crassous ◽  
Jean-Luc Loubet ◽  
Elisabeth Charlaix
Keyword(s):  
Liquid Bridge ◽  
Adhesion Force ◽  
Van Der Waals ◽  
Surface Force ◽  
High Energy ◽  
Attractive Force ◽  
Experimental Measurements ◽  
Metallic Substrates ◽  
Energy Surfaces ◽  
Good Agreement

ABSTRACTWe report experimental measurements of the adhesion force between metallic substrates in undersaturated heptane vapor atmosphere, with a surface force apparatus. The attractive force between the substrates is strongly dependant of the condensation of a liquid bridge connecting the surfaces. The results show the importance of wetting phenomena for the maximum attractive force: we find that this maximum attraction varies as the power two-third of the curvature of the meniscus connecting the surfaces, in good agreement with the theory of Van der Waals wetting.

scholarly journals Dislocation Loop Generation Differences between Thin Films and Bulk in EFDA Pure Iron under Self-Ion Irradiation at 20 MeV

Metals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 2000
Author(s):  
Marcelo Roldán ◽  
Fernando José Sánchez ◽  
Pilar Fernández ◽  
Christophe J. Ortiz ◽  
Adrián Gómez-Herrero ◽  
...  
Keyword(s):  
Thin Films ◽  
Computational Models ◽  
Defect Formation ◽  
Ion Irradiation ◽  
Damage Zone ◽  
High Energy ◽  
Model Material ◽  
Dislocation Nucleation ◽  
Dislocation Loops ◽  
Experimental Conditions

In the present investigation, high-energy self-ion irradiation experiments (20 MeV Fe+4) were performed on two types of pure Fe samples to evaluate the formation of dislocation loops as a function of material volume. The choice of model material, namely EFDA pure Fe, was made to emulate experiments simulated with computational models that study defect evolution. The experimental conditions were an ion fluence of 4.25 and 8.5 × 1015 ions/cm2 and an irradiation temperature of 350 and 450 °C, respectively. First, the ions pass through the samples, which are thin films of less than 100 nm. With this procedure, the formation of the accumulated damage zone, which is the peak where the ions stop, and the injection of interstitials are prevented. As a result, the effect of two free surfaces on defect formation can be studied. In the second type of experiments, the same irradiations were performed on bulk samples to compare the creation of defects in the first 100 nm depth with the microstructure found in the whole thickness of the thin films. Apparent differences were found between the thin foil irradiation and the first 100 nm in bulk specimens in terms of dislocation loops, even with a similar primary knock-on atom (PKA) spectrum. In thin films, the most loops identified in all four experimental conditions were b ±a0<100>{200} type with sizes of hundreds of nm depending on the experimental conditions, similarly to bulk samples where practically no defects were detected. These important results would help validate computational simulations about the evolution of defects in alpha iron thin films irradiated with energetic ions at large doses, which would predict the dislocation nucleation and growth.

scholarly journals The substitution mechanism of Au in In-, Fe- and In-Fe-bearing synthetic crystals of sphalerite, based on the data from EPMA and LA-ICP-MS study

LITOSFERA ◽  
2019 ◽  
pp. 148-161 ◽  
Author(s):  
D. E. Tonkacheev ◽  
D. A. Chareev ◽  
V. D. Abramova ◽  
E. V. Kovalchuk ◽  
I. V. Vikentyev ◽  
...  
Keyword(s):  
Depositional Environments ◽  
Salt Flux ◽  
Research Subject ◽  
Trace Impurities ◽  
Valuable Component ◽  
Experimental Conditions ◽  
Icp Ms ◽  
Substitution Mechanism ◽  
Synthetic Crystals ◽  
Good Agreement

Research subject.Sphalerite (ZnS) is a widespread mineral that can be found in various depositional environments. During formation, this mineral can accumulate minor and trace impurities, with gold being one of the most valuable component. The issue of the chemical state of Au in sphalerite has been much discussed recently.Methods.Samples of In-, Fe- and In-Febearing sphalerite with a composition ranging from 0 to 2.5 mol.% In2S3 and 0 – 40 mol.% FeS were synthesized in an Ausaturated system using gas transport and salt flux techniques. The resulting products were subsequently investigated using EPMA and LA-ICP-MS.Results.All the elements under investigation are found to be homogeneously distributed within the sphalerite matrix. After quenching, sphalerite is shown to retain Au. Our data indicates that the observed increase in Au concentration is caused by the presence of In (up to 1.02 wt % Au) and, to a lesser extent, by that of Fe (up to ≈600 ppm Au). These elements substitute Zn in the crystal structure of sphalerite following the scheme Au+ + In3+(Fe3+) ↔ 2Zn2+, which is in good agreement with previous data obtained using the XAS method.Conclusions.A higher sulphur fugacity in the system leads to a more significant accumulation of Au in sphalerite. The concentration of Au in pure sphalerite does not exceed 10 ppm under our experimental conditions and does not depend on the activity of sulphur in the system.

scholarly journals Theoretical and Experimental Evaluation of Particle size Effect of Iron , Cobalt ,and Nickel Powders Suspended in Al Dura oil on XRF Intensities

2007 ◽  
Vol 4 (3) ◽  
pp. 475-481
Author(s):  
Baghdad Science Journal
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Laser System ◽  
Particle Size Effect ◽  
Particle Sizes ◽  
Iron Cobalt ◽  
X Ray ◽  
Nickel Powders ◽  
Good Agreement ◽  
Cobalt And Nickel

Iron , Cobalt , and Nickel powders with different particle sizes were subjected to sieving and He-Ne laser system to determine the particle size . 1wt% from each powders was blended carefully with 99wt% from Iraqi oil . Microscopic examination were carried for all samples to reveal the particle size distribution . A Siemens type SRS sequential wavelength dispersive(WDS) X-ray spectrometer was used to analyze all samples , and the XRF intensity were determined experimentally and theoretically for all suspended samples , Good agreement between theoretical and experimental results were found .

Sign in / Sign up

Export Citation Format

Share Document