scholarly journals A New Low-Expansion Composite in Lead Iron Niobate-Lead Titanate System

1997 ◽  
Vol 20 (2) ◽  
pp. 77-90
Author(s):  
V. V.S.S. Sai Sundar ◽  
A. M. Umarji
Keyword(s):  
Thermal Expansion ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Lead Titanate ◽  
X Ray ◽  
Temperature Range ◽  
Low Thermal Expansion ◽  
The Individual ◽  
Sintering Condition ◽  
Iron Niobate

A composite prepared between lead titanate (PT) and lead iron niobate (PFN) exhibits low thermal expansion coefficient (α) over the temperature range 300–673K. X-ray, DTA, and dilatometric measurements have been used to identify the optimum sintering condition, retaining the individual constituent identity, to achieve overall low bulk thermal expansion. The composite, PFN0.35PT0.65sintered at 1223K for 15 min. and at 1253K for 60 min. are sufficiently dense and show an overall α of –0.3 × 10–6/K and –1.2 × 10–6/K, respectively, in the temperature range 300–673K.

Intrinsic zero thermal expansion in cube cyanurate K6Cd3(C3N3O3)4

2019 ◽  
Vol 6 (9) ◽  
pp. 2291-2295 ◽  
Author(s):  
Mingjun Xia ◽  
Fei Liang ◽  
Xianghe Meng ◽  
Yonggang Wang ◽  
Zheshuai Lin
Keyword(s):  
Thermal Expansion ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Broad Temperature Range ◽  
The Novel ◽  
Thermal Expansion Behavior ◽  
Temperature Range ◽  
Low Thermal Expansion ◽  
Expansion Behavior

The novel cubic cyanurate K6Cd3(C3N3O3)4 exhibits zero thermal expansion behavior with a very low thermal expansion coefficient of 0.06 MK−1 in a broad temperature range from 10 to 130 K.

Crystallization Behavior and Performance of MgO-Al2O3-SiO2 Glass-Ceramics by Sintering

2010 ◽  
Vol 92 ◽  
pp. 65-71 ◽  
Author(s):  
Pei Xin Zhang ◽  
Li Gao ◽  
Qiu Hua Yuan ◽  
Hai Lin Peng ◽  
Xiang Zhong Ren ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
Flexural Strength ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Crystallization Process ◽  
Glass Ceramics ◽  
X Ray Diffraction ◽  
Low Thermal Expansion ◽  
Main Crystalline Phase ◽  
And Performance

The glass-ceramics of MgO-Al2O3-SiO2 system were prepared by sintering technology. The crystallization process of MgO-Al2O3-SiO2 glass-ceramics was investigated with X-ray diffraction (XRD), scanning electron microscopy (SEM), and other techniques; the discussion of breaking strength, thermal expansion coefficient and relevant properties at different sintering temperatures was also presented. The results show that: (1) The main crystalline phase isα-cordierite at different sintering temperatures, and the samples show high flexural strength and low thermal expansion coefficient; (2) with the increase of sintering temperature, the content of crystal phase increases, while the thermal expansion coefficient decreases evidently, the flexural strength and tightness density rise up first, then go down.

Study on Preparation of Low-Thermal Expansion Coefficient Concrete with Fly Ash

2014 ◽  
Vol 599 ◽  
pp. 89-92 ◽  
Author(s):  
Sha Ding ◽  
Zhong He Shui ◽  
Teng Pan ◽  
Wei Chen
Keyword(s):  
Thermal Expansion ◽  
Fly Ash ◽  
Pore Structure ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Cement Concrete ◽  
Thermal Expansion Property ◽  
Expansion Property ◽  
Low Thermal Expansion ◽  
Addition Level

The low-thermal expansion coefficient (CTE) of cement paste and concrete are designed and prepared with fly ash in this study. The thermal expansion property and pore structure of cement/concrete are tested by Thermal Dilatometer, MIP, and SEM. The test results show that the addition of fly ash lowers the thermal expansion rate and coefficient of hardened paste. The increase of addition level is accompanied by the decrease of the thermal expansion coefficient. The introduction of fly ash could improve the pore structure of concrete, thus improve the thermal expansion property of cement concrete.

Using Variable Temperature Powder X-ray Diffraction To Determine the Thermal Expansion Coefficient of Solid MgO

2007 ◽  
Vol 84 (5) ◽  
pp. 818 ◽  
Author(s):  
Nicholas C. Corsepius ◽  
Thomas C. DeVore ◽  
Barbara A. Reisner ◽  
Deborah L. Warnaar
Keyword(s):  
Thermal Expansion ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Variable Temperature ◽  
X Ray Diffraction ◽  
X Ray

Description of the PM Process by Using Ishikawa-Analysis

2013 ◽  
Vol 752 ◽  
pp. 48-56
Author(s):  
Andrea Simon ◽  
Károly Kovács ◽  
C. Hakan Gür ◽  
Tadeusz Pieczonka ◽  
Zoltán Gácsi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Expansion ◽  
Powder Metallurgy ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
High Strength ◽  
Manufacturing Technology ◽  
Low Density ◽  
Composite Manufacturing ◽  
Low Thermal Expansion

Composites are special material which can provide individual properties such as high strength with low density or good thermal conductivity with low thermal expansion coefficient. Composites conform to the constantly evolving and more complex expectations. In order to make a product with good quality, it is important to choose suitable materials and technology. In this research powder metallurgy (PM), as one of the most common composite manufacturing technology, was examined -which factors and mechanisms influence mostly the properties of the product. Ishikawa method was used to reveal these correlations.

Combustion Synthesis of ZrW2O8 and Preparation of its Composite with Near Zero Thermal Expansion

2007 ◽  
Vol 353-358 ◽  
pp. 1235-1238 ◽  
Author(s):  
Xue Yan ◽  
Xiao Nong Cheng ◽  
Xin Bo Yang ◽  
Cheng Hua Zhang
Keyword(s):  
Thermal Expansion ◽  
Combustion Synthesis ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Linear Thermal Expansion Coefficient ◽  
Linear Thermal Expansion ◽  
Weight Ratio ◽  
Combustion Method ◽  
Temperature Range ◽  
Thermal Expansion Property

ZrW2O8 was successfully synthesized via combustion method with (NH4)5H5[H2(WO4)6] ·H2O, ZrOCl2·8H2O, H3BO3, (NH2)2CO and HNO3. The best prescription of combustion synthesizing of ZrW2O8 was obtained. The linear thermal expansion coefficient of synthesized ZrW2O8 is -5.08×10-6oC-1 in the temperature range of 50-600oC. Different weight ratios of ZrW2O8 and ZrO2 were taken into account. Al2O3 was added into the composite during sintering to increase the density of the composites. When the weight ratio of ZrO2 to ZrW2O8 is 2, the composite with near zero thermal expansion can be obtained. 0.25 wt% Al2O3 can effectively increase the density of ZrO2/ZrW2O8 composites with slight influence on the thermal expansion property.

Sign in / Sign up

Export Citation Format

Share Document