In Situ Measurement of the Deformation and Elastic Modulus Evolution in Si Composite Electrodes during Electrochemical Lithiation and Delithiation

2016 ◽  
Vol 163 (13) ◽  
pp. A2685-A2690 ◽  
Author(s):  
Haimei Xie ◽  
Wei Qiu ◽  
Haibin Song ◽  
Jianhua Tian
Keyword(s):  
Elastic Modulus ◽  
In Situ Measurement ◽  
Composite Electrodes ◽  
Electrochemical Lithiation

Measurement of Cement in Situ Stresses and Mechanical Properties Without Cooling or Depressurization

2021 ◽  
Author(s):  
Meng Meng ◽  
Luke Frash ◽  
James Carey ◽  
Wenfeng Li ◽  
Nathan Welch ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Elastic Modulus ◽  
Poisson’S Ratio ◽  
Axial Stress ◽  
Triaxial Compression ◽  
In Situ Measurement ◽  
Poisson's Ratio ◽  
Ambient Conditions

Abstract Accurate characterization of oilwell cement mechanical properties is a prerequisite for maintaining long-term wellbore integrity. The drawback of the most widely used technique is unable to measure the mechanical property under in situ curing environment. We developed a high pressure and high temperature vessel that can hydrate cement under downhole conditions and directly measure its elastic modulus and Poisson's ratio at any interested time point without cooling or depressurization. The equipment has been validated by using water and a reasonable bulk modulus of 2.37 GPa was captured. Neat Class G cement was hydrated in this equipment for seven days under axial stress of 40 MPa, and an in situ measurement in the elastic range shows elastic modulus of 37.3 GPa and Poisson's ratio of 0.15. After that, the specimen was taken out from the vessel, and setted up in the triaxial compression platform. Under a similar confining pressure condition, elastic modulus was 23.6 GPa and Possion's ratio was 0.26. We also measured the properties of cement with the same batch of the slurry but cured under ambient conditions. The elastic modulus was 1.63 GPa, and Poisson's ratio was 0.085. Therefore, we found that the curing condition is significant to cement mechanical property, and the traditional cooling or depressurization method could provide mechanical properties that were quite different (50% difference) from the in situ measurement.

In Situ Measurement of Strain Evolution in the Graphene Electrode during Electrochemical Lithiation and Delithiation

2019 ◽  
Vol 123 (31) ◽  
pp. 18861-18869 ◽  
Author(s):  
Haibin Song ◽  
Haimei Xie ◽  
Chaochen Xu ◽  
Yilan Kang ◽  
Chuanwei Li ◽  
...  
Keyword(s):  
In Situ Measurement ◽  
Strain Evolution ◽  
Graphene Electrode ◽  
Electrochemical Lithiation

In-situ measurement of elastic modulus for ceramic top-coat at high temperature

2008 ◽  
Vol 15 (S2) ◽  
pp. 372-376 ◽  
Author(s):  
Hong-yu Qi ◽  
Li-zhu Zhou ◽  
Hai-quan Ma ◽  
Xiao-guang Yang ◽  
Xu Li
Keyword(s):  
Elastic Modulus ◽  
High Temperature ◽  
In Situ Measurement

In Situ Measurement of Soil Heat Flux with the Gradient Method

2003 ◽  
Vol 2 (4) ◽  
pp. 589
Author(s):  
Douglas R. Cobos ◽  
John M. Baker
Keyword(s):  
Heat Flux ◽  
Gradient Method ◽  
Soil Heat Flux ◽  
In Situ Measurement

In-Situ Measurement Technique of Stress and Structure Change

2015 ◽  
Vol 84 (8) ◽  
pp. 567-572
Author(s):  
Tadafumi HASHIMOTO ◽  
Masahito MOCHIZUKI
Keyword(s):  
Measurement Technique ◽  
Structure Change ◽  
In Situ Measurement
Sign in / Sign up

Export Citation Format

Share Document