Water Motion over a Wafer Surface Rotating in a Single-Water Wet Cleaner

2011 ◽  
Vol 158 (5) ◽  
pp. H487 ◽  
Author(s):  
Hitoshi Habuka ◽  
Shintaro Ohashi ◽  
Taka-Aki Tsuchimochi ◽  
Tetsuo Kinoshita
Keyword(s):  
Wafer Surface ◽  
Water Motion

Water Motion over a Wafer Surface Rotating in a Single-Wafer Wet Cleaner

2019 ◽  
Vol 41 (5) ◽  
pp. 279-286 ◽  
Author(s):  
Hitoshi Habuka ◽  
Shintaro Ohashi ◽  
Taka-Aki Tsuchimochi ◽  
Tetsuo Kinoshita
Keyword(s):  
Wafer Surface ◽  
Water Motion

Identification of Charging Effects in Plasma-Enhanced TEOS Deposition with Non-Contact Test Techniques

1998 ◽  
Author(s):  
Tomasz Brozek ◽  
James Heddleson
Keyword(s):  
Vapor Deposition ◽  
Chemical Vapor ◽  
Interface State ◽  
State Density ◽  
Interface State Density ◽  
Wafer Surface ◽  
Oxide Charge ◽  
Contact Test ◽  
Deposition Power ◽  
Oxide Deposition

Abstract Use of non-contact test techniques to characterize degradation of the Si-SiO2 system on the wafer surface exposed to a plasma environment have proven themselves to be sensitive and useful in investigation of plasma charging level and uniformity. The current paper describes application of the surface charge analyzer and surface photo-voltage tool to explore process-induced charging occurring during plasma enhanced chemical vapor deposition (PECVD) of TEOS oxide. The oxide charge, the interface state density, and dopant deactivation are studied on blanket oxidized wafers with respect to the effect of oxide deposition, power lift step, and subsequent annealing.

Studies on a Novel Qualification Method of Silicon Nitride Layer

2016 ◽  
Author(s):  
Younan Hua ◽  
Bingsheng Khoo ◽  
Henry Leong ◽  
Yixin Chen ◽  
Eason Chan ◽  
...  
Keyword(s):  
Silicon Nitride ◽  
Silicon Substrate ◽  
Nitride Layer ◽  
Passivation Layer ◽  
Wafer Fabrication ◽  
Wafer Surface ◽  
Si3n4 Layer ◽  
Silicon Nitride Layer ◽  
Passivation Layers ◽  
Pinhole Test

Abstract In wafer fabrication, a silicon nitride (Si3N4) layer is widely used as passivation layer. To qualify the passivation layers, traditionally chemical recipe PAE (H3PO4+ HNO3) is used to conduct passivation pinhole test. However, it is very challenging for us to identify any pinholes in the Si3N4 layer with different layers underneath. For example, in this study, the wafer surface is Si3N4 layer and the underneath layer is silicon substrate. The traditional receipt of PAE cannot be used for passivation qualification. In this paper, we will report a new recipe using KOH solution to identify the pinhole in the Si3N4 passivation layer.

Modeling and Analyzing on Nonuniformity of Material Removal in Chemical Mechanical Polishing of Silicon Wafer

2004 ◽  
Vol 471-472 ◽  
pp. 26-31 ◽  
Author(s):  
Jian Xiu Su ◽  
Dong Ming Guo ◽  
Ren Ke Kang ◽  
Zhu Ji Jin ◽  
X.J. Li ◽  
...  
Keyword(s):  
Silicon Wafer ◽  
Chemical Mechanical Polishing ◽  
Material Removal ◽  
Mechanical Polishing ◽  
Wafer Surface ◽  
Removal Mechanism ◽  
Particle Movement ◽  
Material Removal Mechanism ◽  
The Relationship ◽  
Nonuniform Material

Chemical mechanical polishing (CMP) has already become a mainstream technology in global planarization of wafer, but the mechanism of nonuniform material removal has not been revealed. In this paper, the calculation of particle movement tracks on wafer surface was conducted by the motion relationship between the wafer and the polishing pad on a large-sized single head CMP machine. Based on the distribution of particle tracks on wafer surface, the model for the within-wafer-nonuniformity (WIWNU) of material removal was put forward. By the calculation and analysis, the relationship between the motion variables of the CMP machine and the WIWNU of material removal on wafer surface had been derived. This model can be used not only for predicting the WIWNU, but also for providing theoretical guide to the design of CMP equipment, selecting the motion variables of CMP and further understanding the material removal mechanism in wafer CMP.

Effect of Etchant on SOI Wafer Surface Roughness for APTES Silanization

2019 ◽  
Vol 17 ◽  
pp. 700-706
Author(s):  
N.N. Alias ◽  
K.A. Yaacob ◽  
C.K.Yew
Keyword(s):  
Surface Roughness ◽  
Wafer Surface

Kinetics of silicon nitride crystallization in N+-implanted silicon

1989 ◽  
Vol 4 (2) ◽  
pp. 394-398 ◽  
Author(s):  
V. S. Kaushik ◽  
A. K. Datye ◽  
D. L. Kendall ◽  
B. Martinez-Tovar ◽  
D. S. Simons ◽  
...  
Keyword(s):  
Silicon Nitride ◽  
Amorphous Silicon ◽  
Crystalline Silicon ◽  
Wafer Surface ◽  
Amorphous Silicon Nitride ◽  
Silicon Lattice ◽  
Nitrogen Ions ◽  
The Mean ◽  
Nitride Layers ◽  
Kinetics Of

Implantation of nitrogen at 150 KeV and a dose of 1 ⊠ 1018/cm2 into (110) silicon results in the formation of an amorphized layer at the mean ion range, and a deeper tail of nitrogen ions. Annealing studies show that the amorphized layer recrystallizes into a continuous polycrystalline Si3N4 layer after annealing for 1 h at 1200 °C. In contrast, the deeper nitrogen fraction forms discrete precipitates (located 1μm below the wafer surface) in less than 1 min at this temperature. The arcal density of these precipitates is 5 ⊠ 107/cm2 compared with a nuclei density of 1.6 ⊠ 105/cm2 in the amorphized layer at comparable annealing times. These data suggest that the nucleation step limits the recrystallization rate of amorphous silicon nitride to form continuous buried nitride layers. The nitrogen located within the damaged crystalline silicon lattice precipitates very rapidly, yielding semicoherent crystallites of β–Si3N4.

Measurements of time-averaged intensity of water motion with plaster balls

1992 ◽  
Vol 48 (4) ◽  
pp. 353-365 ◽  
Author(s):  
Teruhisa Komatsu ◽  
Hideo Kawai
Keyword(s):  
Water Motion
Sign in / Sign up

Export Citation Format

Share Document